View Full Version : mustang shift kit
my friend wants to buy a shift kit for his 04 stank gt...where should he go? and what kind of kit should he look for? also can someone with a ratchet set install it?
Savage_Messiah
04-26-2005, 04:59 PM
He should buy a Camaro
12secondv6
04-26-2005, 05:12 PM
Contact La Rocca's by e town, they are stang guru's
big no no as far as self installation. :nono:
I'd probably tell him to take it to la rocca's, just like james said. they really know mustangs, so it would be a safe bet that they wouldn't mess it up. 8)
(732) 723-1111
or
http://www.laroccas-performance.com/index1.htm
8)
thanks! :D
no problem mang :P
Fasterthanyou
04-26-2005, 07:49 PM
Ian, what's up with these mustangs and cowl hoods?
http://www.laroccas-performance.com/customers_cars.htm
It's not like they need the cowl for air intake NORE clearances... wtf. It's starting to piss me off. At least my cowl is for clearances AND air intake.
As for the shifter install, I didn't know it was all that difficult... what's so hard about the install?
Ian, what's up with these mustangs and cowl hoods?
http://www.laroccas-performance.com/customers_cars.htm
It's not like they need the cowl for air intake NORE clearances... wtf. It's starting to piss me off. At least my cowl is for clearances AND air intake.
As for the shifter install, I didn't know it was all that difficult... what's so hard about the install?
I didnt put the hood on there, it was like that when I bought it. I did get the stock hood too, but its bent :? .
He isn't talking about a shifter, he wants a shift kit. Like new springs and valve body. All those little check balls...what a nightmare. :lol:
*edit* I think some of the guys running turbo setups might need the cowl hood for clearance. I know some of the aftermarket upper intake manifolds are taller than stock, plus they sell spacers for between the upper and lower intake, so I'm sure someone actually needs a hood like that. It helps keep underhood temperatures a little bit lower too I think.
foff667
04-27-2005, 08:34 AM
big no no as far as self installation. :nono:
I'd probably tell him to take it to la rocca's, just like james said. they really know mustangs, so it would be a safe bet that they wouldn't mess it up. 8)
whats special about their aod trannies? I did my shiftkit by myself in my neighbors garage with basic hand tools :shrug:
Tru2Chevy
04-27-2005, 09:36 AM
whats special about their aod trannies? Â*I did my shiftkit by myself in my neighbors garage with basic hand tools :shrug:
The kid actually paid for a Mustang.....he can't be very bright (No offense Ian).
- Justin
whats special about their aod trannies? Â*I did my shiftkit by myself in my neighbors garage with basic hand tools :shrug:
The kid actually paid for a Mustang.....he can't be very bright (No offense Ian).
- Justin
well i would be doing the install on the shift kit...i guess then he should leave it up to me?
12secondv6
04-27-2005, 10:35 AM
I don't mess w/ trannies, they are black magic!
bad64chevelle
04-27-2005, 10:40 AM
The shift kit cant be too difficult. Just make sure everything you take out goes back in lol. Never done one personally, but will be in the next few months.
<~~Cowl hood is for clearance
BigAls87Z28
04-27-2005, 11:42 AM
Every 5.0 Mustang I see has at least a 3 inch cowl hood.
foff667
04-27-2005, 11:52 AM
Every 5.0 Mustang I see has at least a 3 inch cowl hood.
I saw a guy with a 2 1/2in cowl once but he had a 3" on lay a way the last time i saw him :lol:
Tru2Chevy
04-27-2005, 12:43 PM
whats special about their aod trannies? Â*I did my shiftkit by myself in my neighbors garage with basic hand tools :shrug:
The kid actually paid for a Mustang.....he can't be very bright (No offense Ian).
- Justin
well i would be doing the install on the shift kit...i guess then he should leave it up to me?
Don't call me for tech support on that one. I've done plenty of cam swaps, but only 1/2 of a shift kit (helped with Matt's in the 454SS).
- Justin
i've heard it depends on the kit. a B&M shift kit can be done easily in your garage, but something like a transgo will be a little more complicated. i think it comes with a how-to video, but i wouldn't try it by myself.
foff667
04-27-2005, 01:35 PM
yah the transgo kit for the 4l60e looked complicated as hell...mine was like 4/5 springs and a couple of drilled holes...nothing horrible but the directions sucked(no video included with tci kit) and some things were different in my tranny so it was a guessing game for a few things.
you can do it at home, but if you dont know what you're doing, I would leave it up to a pro. But, if you really want to do it yourself, go for it. My dad and I put a shift kit in the TH-350 thats in the camaro. Then again, my dad was a mechanic for 15 or so years. I passed the ATRA test (Automatic Transmission Rebuilders Association), so I could probably instal a shift kit. If you end up doing it yourself and you run into a problem, let me know, I'll try to help. Otherwise just let someone else do it.
Tru2Chevy, no offense taken. :lol:
you can do it at home, but if you dont know what you're doing, I would leave it up to a pro. But, if you really want to do it yourself, go for it. My dad and I put a shift kit in the TH-350 thats in the camaro. Then again, my dad was a mechanic for 15 or so years. I passed the ATRA test (Automatic Transmission Rebuilders Association), so I could probably instal a shift kit. If you end up doing it yourself and you run into a problem, let me know, I'll try to help. Otherwise just let someone else do it.
Tru2Chevy, no offense taken. :lol:
u live nearby...im sure you wouldnt mind stopping by to fix my **** up :lol:
you can do it at home, but if you dont know what you're doing, I would leave it up to a pro. But, if you really want to do it yourself, go for it. My dad and I put a shift kit in the TH-350 thats in the camaro. Then again, my dad was a mechanic for 15 or so years. I passed the ATRA test (Automatic Transmission Rebuilders Association), so I could probably instal a shift kit. If you end up doing it yourself and you run into a problem, let me know, I'll try to help. Otherwise just let someone else do it.
Tru2Chevy, no offense taken. :lol:
u live nearby...im sure you wouldnt mind stopping by to fix my **** up :lol:
I'm there if you need me :)
jims69camaro
04-28-2005, 08:07 AM
why not be there for the install ad avoid the ****-up (should there be one)? i swear, you buying that rustnag has dumbed you down a bit... :j/k:
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.