FS: carb, cars, etc. Updated with Pics!

[calhoon]

I got a Qjet from an '86 305, rebuilt, still in the box/shrink wrap. best offer gets it.

Also have the '86 TA it was going to go into. It a roller, no motor or trans. Various parts available as well. $300.

Also have a 2000 Ford Contour, black, great shape, 57000 miles. Asking $6750, neg.

Pics of both cars avilable upon request.

[Malibu79]

u selling the front sway off of it if so what size is it ????

[calhoon]

I got the front sway bar off the car. It's like 34 or 36 mm, I'm not exactly sure cause rulers don't measure those too well. I powdercoated the bar and the brackets silver, just need new bushings.

[ar0ck]

Got any pics of the T/A?

Where are you located in Bergen County BTW? I might be able to check it out.

[calhoon]

Unfortunatly the only 2 pics I have are in some sort of mysterious format that nothing can open. I could try to get another pic tomorrow or something.

The car is dark green, third brake light is nonexistant, body is pretty solid but there's some rust underneith. The interior isn't that bad but I took part of the dash apart to put in a Camaro console.

And before I forget, I'm in Garfield.

[Tru2Chevy]

I got the front sway bar off the car. Â*It's like 34 or 36 mm, I'm not exactly sure cause rulers don't measure those too well. Â*I powdercoated the bar and the brackets silver, just need new bushings.

If you still have the RPO codes, check and see if it has the WS6 package. If so then the bar should be 36mm.

- Justin

[camaro2you]

got any pics of the trans am?
any pics of the carb?

[calhoon]

I'm working on some pics of the trans am, I'll try to get one of the carb too. I'd say tomorrow night I might could have em on here.

[calhoon]

Sorry it took so long. Here's the Trans Am. I don't have the RPO codes but I don't think it's a WS6, I think the sway bar was just added on by the previous owner.

http://www.team3rdgen.com/albums/albun50/pict0001.sized.jpg




http://www.team3rdgen.com/albums/albun50/pict0002.sized.jpg

[calhoon]

It looks like a big mark on the pass. door but its just the reflection from the tarp.

Here's the Q-jet.


http://www.team3rdgen.com/albums/albun50/pict0003.sized.jpg

[camaro2you]

where did you buy the carb from?

[calhoon]

I got it at AutoZone, rebuilt by Champion that's what the box says anyway.

[calhoon]

Carb is still available. It does not have a TPS though. Make offers.

[camaro2you]

does that have a jet kit or anything in it?

[calhoon]

Nope, just the way it came from the store.