Driveshaft Needed

[bad64chevelle]

I took the rear of my 94 Camaro Z28 A4 apart today and found out that the posi and the gears were perfectly fine. What was causing my problems were my universals on the driveshaft. Does anyone have a good driveshaft that will fit my car? Let me know where you are at and a price and maybe we can work something out. Thanks again!

Jon

[Ian]

why dont you just change the U-joints? it would be a lot cheaper.

[rich98z28]

dude e-mail me and i will help u change em 1 weekend fast28rc@aol 8) 8)

[j0n]

well that's good to hear...lemme know when ur back up and running

[bad64chevelle]

Yeah, well on further inspection my buddy told me that the posi and the Universals were shot. Im gonna go buy some universals today and am waiting for the big brown box truck to come so I can get started...Ill let you know bro. Later

Jon

[9secfirebird]

ill help you change them, im right in clinton. i work with jon all the time

[bad64chevelle]

How hard are they to change? I have never done a set of the u joints. If they are a PITA I may take you up on the offer. Thanks alot! Later
Jon

[rich98z28]

naa there not that hard 4 me anyway just did a set last week on a 1500 pickup e-mail me and well exchange phone #s and set up a time 2 do em im in ewing and grew up in b-town c-ya later rich 8)

[camaro2you]

i got the tool to do them if you need it. let me know

[9secfirebird]

you dont need a tool to do them

[bad64chevelle]

Alright thanks guys well ill take a crack at them and see what i can do, ill shoot you a pm rich. Thanks! Later

Jon

[ChickenLittle]

well, since you don't need the driveshaft anymore, I may as well mooch off of this post :mrgreen:

i do need a stock driveshaft for a 94-97 f-body LT-1 T-56 (not sure of the auto is the same), i'm working on a project and i need it to complete the job...so if anyone has one lying around (like i did at one point...doh!), i'd appreciate it, I'll come pick it up or meet halfway, I'm Essex County

Thanks! 8)

[qwikz28]

well, since you don't need the driveshaft anymore, I may as well mooch off of this post Â*:mrgreen:

i do need a stock driveshaft for a 94-97 f-body LT-1 T-56 (not sure of the auto is the same), i'm working on a project and i need it to complete the job...so if anyone has one lying around (like i did at one point...doh!), i'd appreciate it, I'll come pick it up or meet halfway, I'm Essex County

Thanks! 8)jon (badchevelle) and i have one for a auto. if you find out its universal we can take it out for ya next week and i can just chuck it in my truck and we can probably meet you half way or something. i live in piscataway and jon lives in bordentown. you can PM either one of us.

[Savage_Messiah]

82-92 drveshafts all fit each other IIRC

[Tru2Chevy]

82-92 drveshafts all fit each other IIRC

Actually, 1982-2002 auto or manual driveshafts should all be interchangable.

- Justin

[camaro2you]

you dont need a tool to do them

Then i dont know how the hell your taken out your old u joints out and puttin the new ones in.

[ChickenLittle]

you dont need a tool to do them

Then i dont know how the hell your taken out your old u joints out and puttin the new ones in.

you can't do it with a screwdriver and a pair of needlenose? :wink:

[camaro2you]

yes and its five times easier with the press

[bad64chevelle]

I will have the Driveshaft out of that Z28 probably this weekend if i get a break in the weather and can go out and work on that car let me know chickenlittle what you wanna do about it. Thanks!

Jon

[ChickenLittle]

I will have the Driveshaft out of that Z28 probably this weekend if i get a break in the weather and can go out and work on that car let me know chickenlittle what you wanna do about it. Thanks!

Jon

I sent qwikZ28 a PM 8)