PDA

View Full Version : Shifter options/opinions


IROCdan330
06-09-2005, 02:49 PM
I'm looking into a ratchet shifter now that Ziggy suggested manually upshifting during racing because it helps to maintain constant line pressure and its better for the trans...its not a full manual valve body, so I wont be downshifting with it and all that too.

I just want something i can drive normal with, then drop it into 1st and hammer through 2nd and 3rd.

I looked into the megashifter, but heard of way too many problems.

I was thinking hurst dual gate shifter...I think itd be perfect, and they make a console model for f-bodies. I just need to know if it works with a 700r4.

I want something that is a quality piece and that is simple to install. Also, if the time comes when I buy it...does anyone want to volunteer to help me install?

78camaro
06-09-2005, 03:48 PM
I'm looking into a ratchet shifter now that Ziggy suggested manually upshifting during racing because it helps to maintain constant line pressure and its better for the trans...its not a full manual valve body, so I wont be downshifting with it and all that too.

I just want something i can drive normal with, then drop it into 1st and hammer through 2nd and 3rd.

I looked into the megashifter, but heard of way too many problems.

I was thinking hurst dual gate shifter...I think itd be perfect, and they make a console model for f-bodies. I just need to know if it works with a 700r4.

I want something that is a quality piece and that is simple to install. Also, if the time comes when I buy it...does anyone want to volunteer to help me install?

if you dont mind semi-customizing your console for a perfect fit id go with the quarter stick..

IROCdan330
06-09-2005, 03:51 PM
oh i mind...sounds like a bitch...any reason why youd recommend that?

78camaro
06-09-2005, 03:56 PM
oh i mind...sounds like a bitch...any reason why youd recommend that?

i cant say i have used it personally but i was planning on getting it for my 2nd gen n i did my research on it and i didnt see many negative feedback about it i have used in my own cars is the megashifter and the hurst v matic 2...mega shifter=crap i actaully really liekd the hurst never had any problems with it

NJSPEEDER
06-09-2005, 03:59 PM
i had a b&m console mega shifter in my 91rs. i very much recomend it.

later
tim

IROCdan330
06-09-2005, 03:59 PM
I just looked at stuff for it...it doesnt work with a 700r4 which is what my trans is...i shouldda specified...also...mine is a 3rd gen so if i put something like that in itd sit pretty high id think.

IROCdan330
06-09-2005, 04:00 PM
i had a b&m console mega shifter in my 91rs. i very much recomend it.

later
tim

ive heard too many bad things about em man...such as relays blowing constantly, the cable being too long...the thing being too hard to pull out of park, the light burning out as well as the gear selector cable snapping so it shows it as being in park all the time even though youre in another gear...

NJSPEEDER
06-09-2005, 04:07 PM
really? i never had any of those problems. the gear cable did snag once, but that was because i didn't get it in right after working under teh console.
unfortunately i think the choices are rather limited.

later
tim

IROCdan330
06-09-2005, 04:25 PM
im still kinda hell beant on the dual gate...no one knows about it? they have a console model for an 83-93 f-body...or so JEGS says...

i think the idea on that thing is so cool.

NJSPEEDER
06-09-2005, 04:28 PM
i have seen them in cars before. they rattle like hell. the gate gets loose and they make a ton of friggin noise. very very annoying.

later
tim

IROCdan330
06-09-2005, 04:34 PM
well thats not cool...

if i went with the megashifter...would you aid in the install by any chance Tim?

NJSPEEDER
06-09-2005, 05:21 PM
surte thing man.

later
tim

camaro2you
06-09-2005, 08:47 PM
I can help you out to i just installed mine if you saw the pics.

IROCdan330
06-09-2005, 08:59 PM
I can help you out to i just installed mine if you saw the pics.

see i wouldda PMed you about it but you said you dont have a trans to install it onto...

ill re-look into it.

do you think the bad things said about the megashifter are just a few bad experiences and most of them are good? or what?

Fasterthanyou
06-10-2005, 04:39 AM
You'll be fine with the stock shifter. I'm fine with it and I don't consider myself super human when it comes to driving skills. The only shift that takes practice is the 1-2 since 1st gear happens in a blur. Other than that you've got all day to bump the stock shifter up a notch. I set the rev limiter in your bin so you won't blow the bottom end out of the engine. I also think I found the EGR problem and we'll get that figured out asap.

IROCdan330
06-10-2005, 05:10 AM
awesome man...my trans should be ready to go sometime next week...so if I'm lucky the car will be pretty much finished by next weekend...if thats the case I'll let you know...sunday is one of my days off.

coolcamaroZ28
06-16-2005, 08:19 AM
My vote goes for the Hurst Dual Gate. I've had it in for about a year now and I've had no problems using it. Installation was another story-had to do some modification under the console for proper clearance and is definately a 2 man job so you can adjust the shifter stops properly, but otherwise, it's great. I was never a big fan of the mega-shifter, just don't like the big rubber boot look, but that's just me...

http://memimage.cardomain.net/member_images/5/web/821000-821999/821509_7_full.jpg


http://www.coolcamaro.cz28.com/

maroman88
06-17-2005, 09:57 AM
i got a megashifter for my 88 n i loooove it, however it is always in park but i never looked into why...and it comes with 2 choices of the selector screen and of course i lost the one for the 4speed so im stuck with the 3 speed indicator

bokey
06-17-2005, 04:43 PM
My vote goes for the Hurst Dual Gate. I've had it in for about a year now and I've had no problems using it. Installation was another story-had to do some modification under the console for proper clearance and is definately a 2 man job so you can adjust the shifter stops properly, but otherwise, it's great. I was never a big fan of the mega-shifter, just don't like the big rubber boot look, but that's just me...

http://memimage.cardomain.net/member_images/5/web/821000-821999/821509_7_full.jpg


http://www.coolcamaro.cz28.com/

I like the idea behind the duel gate, but I think the shifter sticks up way to far... Have you ever had any problems with it? Also, does anybody have a picture of the B&M shifter installed?

ar0ck
06-17-2005, 04:51 PM
In my T/A without the boot (wouldnt work with T/A console)

http://memimage.cardomain.net/member_images/1/web/385000-385999/385818_84_full.jpg

maroman88
06-18-2005, 01:14 AM
http://memimage.cardomain.net/member_images/1/web/217000-217999/217164_40_full.jpg


u can see most of it

camaro2you
06-18-2005, 08:56 AM
http://memimage.cardomain.net/member_images/4/web/652000-652999/652711_41_full.jpg

http://memimage.cardomain.net/member_images/4/web/652000-652999/652711_39_full.jpg

http://memimage.cardomain.net/member_images/4/web/652000-652999/652711_40_full.jpg

Slow Z
06-18-2005, 06:58 PM
My megashifter works fine. It isnt hard to get in and out of gears. The only thing is if you hit the handle hard it'll spin off or feel like its going to strip. Just gotta make sure you grab it firmly before shifting. Also make sure you grease the living crap out of it and then grease it even more

enRo
06-18-2005, 07:45 PM
http://memimage.cardomain.net/member_images/4/web/652000-652999/652711_39_full.jpg


Is that an NES controller on top of the dash??

camaro2you
06-18-2005, 08:29 PM
6 disk pioneer controller.

IROCdan330
06-18-2005, 09:29 PM
i ordered the quarter stick...decided i didnt care about custom crap...and i liked the way it seemed. got it today...seems kick ass.

anyone want to help me install it on say tuesday of next week? i dont have ramps or very many tools so any help is appreciated.