Figured I'd let the cat out of the bag now lol

[Jersey_TA]

Just the reason my car has been down for the past few weeks. I have been having a few goodies installed.

- Custom Comp Cam
- Ported 241 heads
- 30 lb. injectors
- Moser 12 bolt

I should have the car back by wednesday or thursday at the latest. I couldn't keep this down any longer :wink: :twisted:

[NJSPEEDER]

get teh car back wednesday or thuirsday? hmmm, feel like a little cruise up to island for their test and tune sunday? :D
congrats on teh new combo. can't wait to hear the numbers

later
tim

[Jersey_TA]

get teh car back wednesday or thuirsday? hmmm, feel like a little cruise up to island for their test and tune sunday? :D
congrats on teh new combo. can't wait to hear the numbers

later
tim

I will be driving home saturday morning for my 20 day vacation home in IL. Gotta wait till I get back to hit atco. Though I will be testing the car at GIR back home for the best launch techniques.

[12secondv6]

Sweet!

Best of luck :)

And... we are still on for a grudge match... later on this year :)

[Jersey_TA]

Sweet!

Best of luck :)

And... we are still on for a grudge match... later on this year :)

Thanks, you too man. Grudge match = :) 8)

[Koll]

30#? Weak.

Also, if you dont mind, specs on the cam.

[Tru2Chevy]

Just the reason my car has been down for the past few weeks. I have been having a few goodies installed.

- Custom Comp Cam
- Ported 241 heads
- 30 lb. injectors
- Moser 12 bolt

I should have the car back by wednesday or thursday at the latest. I couldn't keep this down any longer :wink: :twisted:

Was that all supposed to be a secret?

Can't wait to see this beast now.....there had better be plenty of advance notice for your first trip to Atco with the new setup.

- Justin

[BigAls87Z28]

All that stuff, and no VTECK?

Psh...that **** aint fast yo.

[foff667]

who's heads & what size cam? a larger stall might be in order depending on how large a cam you ended up with...i think that vert you had in there was small for that 228 cam.

[Squirrel]

so im guessin the cam is around 24*/25*, 6**/6** :D

[foff667]

so im guessin the cam is around 24*/25*, 6**/6** :D

at the rate its been going up stock-212-228...i would say your on the right track...figure it'll probably be in the 242/242 .610/.610 114 range hehe

[Jersey_TA]

30#? Weak.

Also, if you dont mind, specs on the cam.

Well, we'll see how weak it is at the track. The specs are just a little bit bigger than my old cam

[Jersey_TA]

Just the reason my car has been down for the past few weeks. I have been having a few goodies installed.

- Custom Comp Cam
- Ported 241 heads
- 30 lb. injectors
- Moser 12 bolt

I should have the car back by wednesday or thursday at the latest. I couldn't keep this down any longer :wink: :twisted:

Was that all supposed to be a secret?

Can't wait to see this beast now.....there had better be plenty of advance notice for your first trip to Atco with the new setup.

- Justin

Kind of a secret, but kinda not. I will post up in advance before I go to atco

[Jersey_TA]

who's heads & what size cam? a larger stall might be in order depending on how large a cam you ended up with...i think that vert you had in there was small for that 228 cam.

This set-up is made for my 3600 stall. Details are confidential

[j0n]

i cant wait to see that monster run!

[foff667]

who's heads & what size cam? a larger stall might be in order depending on how large a cam you ended up with...i think that vert you had in there was small for that 228 cam.

This set-up is made for my 3600 stall. Details are confidential

unfortunatly most ls1 head/cam cars make peak tq at around 5000 rpms so unless your going back to the stock cam there arent many cams "made" for your 3600 stall ;)

[Batman]

If you got a decent cam (228-232 range) and good heads you will see a big bump in torque, My guess with a 3600 Stall he has something in the 228-230 range and about .585 lift, that would make for a nasty combo witht hat stall. a 242/242 with over .600 lift would run poorly on the street in a stock bore engine, you would lose all your bottom end power.
My guess:

230/230 .585/.585 112LSA

[Jersey_TA]

who's heads & what size cam? a larger stall might be in order depending on how large a cam you ended up with...i think that vert you had in there was small for that 228 cam.

This set-up is made for my 3600 stall. Details are confidential

unfortunatly most ls1 head/cam cars make peak tq at around 5000 rpms so unless your going back to the stock cam there arent many cams "made" for your 3600 stall ;)

It's all about the combo, and mine has been proven on the 4 cars before mine that have the same set-up.

[Jersey_TA]

My guess:

230/230 .585/.585 112LSA

survey says................nope :wink:

[bad64chevelle]

Whose converter are you using? Ill be gettin a custom ATI converter for the Chevelle over the winter (Im tired of the Big cam and the stock converter problems)

[Jersey_TA]

Whose converter are you using? Ill be gettin a custom ATI converter for the Chevelle over the winter (Im tired of the Big cam and the stock converter problems)

I got a Vigilante 3600 with a 2.5 str

[Squirrel]

are you gonna spray the ****er? :D

[Jersey_TA]

are you gonna spray the ****er? :D

Nope, never

[SteveR]

A 3600 stall is still a pretty good number for both street and track. I'm guessing something in the 240/ .590 lift range. Sounds like a nice setup, can't wait to see it run :twisted:

[Fastbird]

Definitely let us know when you plan to run. Gonna shoot for a 10 first time out of the hole??

[Jersey_TA]

Definitely let us know when you plan to run. Gonna shoot for a 10 first time out of the hole??

I'm going to practice launching back home at the track when I am on vacation, then I am going to make one final pass at the track lol

[IROCdan330]

when you go to atco let everyone here know so we can all come and watch.

also...ill give you a dollar if you go 10.999 on your first run :D

[Jersey_TA]

when you go to atco let everyone here know so we can all come and watch.

also...ill give you a dollar if you go 10.999 on your first run :D

Deal. Wish me luck :)

[IROCdan330]

good luck.

oh...i should have said 10.999 or better.

whats the projected ET/60'? or is that still secret as well.

[Jersey_TA]

good luck.

oh...i should have said 10.999 or better.

whats the projected ET/60'? or is that still secret as well.

Anything around 10.99999 to 11.3 in the summer heat would be awesome.

[Fastbird]

Why do you say

One final pass at the track

?????

[Tru2Chevy]

Why do you say

One final pass at the track

?????

Because he has no bar and plans on getting thrown out :D

- Justin

[Jersey_TA]

Why do you say

One final pass at the track

?????

Because he has no bar and plans on getting thrown out :D

- Justin

Yep, exactly lol

[SteveR]

Why do you say

One final pass at the track

?????

Because he has no bar and plans on getting thrown out :D

- Justin

Yep, exactly lol

maybe you can trick em with some black PVC tubing :D

[Koll]

Ill let you borrow a real cam. One of the big block ones we got. Looks more like a crank.

[Jersey_TA]

Why do you say

One final pass at the track

?????

Because he has no bar and plans on getting thrown out :D

- Justin

Yep, exactly lol

maybe you can trick em with some black PVC tubing :D

How about no lol. I heard someone got banned for a year from atco for doing that.

[IROCdan330]

so whens the cage and all that fun stuff being taken care of?

[Jersey_TA]

so whens the cage and all that fun stuff being taken care of?

Probably around sept.

[Ant'sWS6]

are you gonna spray the ****er? :D

Nope, never

:headbang: dat's right...spray is for girls....and non V-8's.... :P