Temp gauges

[camaro2you]

Does anyone have oil or tranny temp gauges in their cars right now.

[Jersey_TA]

Does anyone have oil or tranny temp gauges in their cars right now.

I got a trans temp 8)

[Pampered-Z]

What did you want to know?

I have a autometer gauge mounted in the center console, using a mounting plate made by Campro designed. The sendor screws into my oil pan ( canton pan ). Oil temp is 190+ in traffic, down to 170-180 when moving.

Does that help?

[camaro2you]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

[Jersey_TA]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

Mine is actually mounted on a port on the side of the trans and not the pan. No clearance probs for me.

[camaro2you]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

Mine is actually mounted on a port on the side of the trans and not the pan. No clearance probs for me.

what do you mean by a port?

[Jersey_TA]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

Mine is actually mounted on a port on the side of the trans and not the pan. No clearance probs for me.

what do you mean by a port?

it's hard to explain. it had a screw in port that the guy that had the trans before me used for his guage, and I used the same one. Kinda like a screw in freeze plug port.

[camaro2you]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

Mine is actually mounted on a port on the side of the trans and not the pan. No clearance probs for me.

what do you mean by a port?

it's hard to explain. it had a screw in port that the guy that had the trans before me used for his guage, and I used the same one. Kinda like a screw in freeze plug port.

wounder if my 700r4 has one.

[camaro2you]

What did you want to know?

I have a autometer gauge mounted in the center console, using a mounting plate made by Campro designed. The sendor screws into my oil pan ( canton pan ). Oil temp is 190+ in traffic, down to 170-180 when moving.

Does that help?

do you know the part number of your canton pan?

[Pampered-Z]

Not sure, they have allot of different pans based on application and oil pump. I got the pan for the LT1 F-body for racing, 7 quart pan for the HD melling oil pump.

You can check their web site

http://www.cantonracingproducts.com/

They are not cheap, but these wasn't allot of others out there. It was over $250.

[camaro2you]

Is this pan on a daily driven street car?

[camaro2you]

I was woundering were you guys had your sendors located so i know i wont have any clearance problems.

Mine is actually mounted on a port on the side of the trans and not the pan. No clearance probs for me.

Thats a great idea I found one on my its right above where the shifter linkage mounts onto. No more having to drill a hole in the pan, now i just have to figure out my oil temp, not shure if i want to go with the canton pan or not.