What intake?

[WayFast84]

What vortec intake manifold do you recomend for theese? http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10002&storeId=10001&categoryId=19715&parentCategoryId=10187&langId=-1

:nod: Im goin vortec :nod:

and where are the self alighning rockers?!?!?!~

[Teds89IROC]

depends, are you going carb or EFI? I'm getting vortec heads along with a holley stealth ram efi.

~Ted

[WayFast84]

Carb, what gaskets and bolts? omg this list is getting real expensive... and where to get the self alighning rocker arms I cant find them on jeegs
but im looking at this http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10002&storeId=10001&categoryId=61312&parentCategoryId=11935&langId=-1
would the $349 work? does it come with electrical stuff??

[Teds89IROC]

No, the one you linked up is only the upper plenum and intake manifold, this is the whole kit..intake, plenum, injectors, fuel rails, TB, and wiring... http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=21447

~Ted

[Teds89IROC]

Do a search "vortec intake manifold" a lot of stuff comes up..TBI, MPFI, and carb applications.

~Ted

[WayFast84]

No, the one you linked up is only the upper plenum and intake manifold, this is the whole kit..intake, plenum, injectors, fuel rails, TB, and wiring... http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=21447

~Ted I knew it was to cheap to be true...

[WayFast84]

http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=14237

part#
350-2116
Is that good?

[BonzoHansen]

Don't you have a 305?

[MilehighBird]

Check out www.sdpc2000.com . They are a large GM performance parts center in Texas. They should have an intake that will work with Vortec heads.

[WayFast84]

http://www.sdpc2000.com/search.asp?searchterm=self+aligning+rocker+arm&doquery=1
wich one?

[camaroAL]

if you have a 305 they wont work but if you still want a pair i have them 400.00 with self aligning rockers, assembled with valve springs on a running engine. ill give you the carbureted intake for 75.00. and if you need a 350 i have a complete one that can use the heads and intake, the car that the heads are on goes 13.34 in a 3500lb 77 camaro with a very mild cam. pm me for info or questions