Need bearing puller

[BonzoHansen]

http://img77.imageshack.us/img77/9522/dscf09296ow.th.jpg (http://img77.imageshack.us/my.php?image=dscf09296ow.jpg)

Anybody have one of these little babies I could borrow??? I can't bring my self to spending $50-100 on a tool I'll use once.

[project89]

what bearing are u trying to remove, i have bearing pullers just not one like that, but prolly have one that will work

[BonzoHansen]

Input shaft bearing off the main input shaft, basically just like the pic. Bearing has a lock ring groove around it where the puller can grab.

[WildBillyT]

Bonzo,

First off- sorry for not getting back to you at all recently. I've been working from 8AM to 9-11PM this week and have had little time to do much.

Anyway,

When we get together to do the subframes I've got you covered. We've got a gullotine "puller" like you need.

[BonzoHansen]

Damn Billy, you got everything. :) New job sounds like a real picinc.

[BigAls87Z28]

you could also rent one from Advance or AutoZone.

[BonzoHansen]

The auto zone by me looked at me like I had 5 heads. I didn't realize Advance rented tools, I’ll try there this weekend.

[BonzoHansen]

Advance = no dice, but the guys were nicer & somewhat more knowledgible.

[project89]

did u ever get what ya needed if not if ur near milltown, i have a puller that would work but id have to do it at the shop in the press

[BonzoHansen]

I might have, but I'll let you know. Thanks-

[project89]

alright np

[1QWIKBIRD]

http://img77.imageshack.us/img77/9522/dscf09296ow.th.jpg (http://img77.imageshack.us/my.php?image=dscf09296ow.jpg)

Anybody have one of these little babies I could borrow??? I can't bring my self to spending $50-100 on a tool I'll use once.


Did you ever find one? if not I'm pretty sure I have one or two you could borrow and I'm in hamilton....

Chris

[BonzoHansen]

Billy said he has one, but if you are in Hamilton, that is one less thing I have to harrass him about. :) You got PM

[WildBillyT]

Nah, you aren't harassing me. If anything I feel bad that we haven't been able to get any of this stuff done yet.

[BonzoHansen]

Chris, thanks for the help, but they are too small. Let me know a good time this week I can return them.

Billy, is yours big enough to get around an ~3 1/4" bearing? If not, then I have to hit e-town on Saturday.

[WildBillyT]

Scott,

I will check for you. I know we use it for pinion bearings and muncie rebuilds.

[1QWIKBIRD]

Chris, thanks for the help, but they are too small. Let me know a good time this week I can return them.

Billy, is yours big enough to get around an ~3 1/4" bearing? If not, then I have to hit e-town on Saturday.


Whenever is convienent for you.....if I'm not home just leave it in the mailbox. Tuesday and Thursday between 5 and 6pm is probably best.

Chris

[BonzoHansen]

Thanks. Look for it in your mailbox tonight.

[johnjzjz]

DID YOU EVER GET THE LARGE BEARING PULLER PLATE YOU NEEDED I ONLY HAVE THE BOTTOM SPLITER PART NOT THE TOP PULLER ATTACHMENT WE USE A PRESS I AM GOING TO E TOWN TO LET ONE OF MY NEPHEWS DRIVE MY 10 SECOND F BODY ON WEDS NIGHT CAN GIVE YOU MY CELL # IF THAT WORKS FOR YOU I WILL BRING IT, -- PM -- ME AND I WILL PUT IT IN THE CAR TOMOROW SO I DONT FORGET JZ

[BonzoHansen]

Johnjzjz: Thanks. You have PM.

Chris: Did you get your mail? :) And thanks.

Billy: When is a good time to call you? I gotta figure out the weekend.

[1QWIKBIRD]

yeah I got the mail.....sorry they didn't work for ya....


good luck

[WildBillyT]

Johnjzjz: Thanks. You have PM.

Chris: Did you get your mail? :) And thanks.

Billy: When is a good time to call you? I gotta figure out the weekend.

How's tomorrow at around 8pm?

[BonzoHansen]

Will do.