Any one tig weld?

[WayFast84]

I need a tig welder to weld on a 02 bung for me, please call 908 756 9557 ASAP! if you are one and can weld one on for me today/tonight. thanks

Matt

[79CamaroDiva]

I know a Ian can Tig weld, but not sure he has one readily available. I'm sure he'll see this after work.

[Mike]

you have a stainless y-pipe? you can probably just have it miged.....oh and btw, its like 40 bucks at an exhaust shop, stop beggin for free work

not to mention if you find someone with a tig welder, thats willing to drive their eqipment to your house just to make a 30 second bead of weld, your hose electric probably wont be able to handle the current the welder will need

[HardcoreZ28]

Like I told j0n you don't want to mig it....could distort the threads. I'd tig it to be on the safe side.

[project89]

i can tig it for u also

[curt86iroc]

bring it to york, pa and ill do it for ya!

[bad64chevelle]

you have a stainless y-pipe? you can probably just have it miged.....oh and btw, its like 40 bucks at an exhaust shop, stop beggin for free work

not to mention if you find someone with a tig welder, thats willing to drive their eqipment to your house just to make a 30 second bead of weld, your hose electric probably wont be able to handle the current the welder will need


I dont see anywhere he said that he wants it done for free, do you? I dont think he expected it done for free either, all he was asking was for someone in the area that could possibly help him out. Obviously you have been so fortunate that you have never needed help from another human being before. I wish we were all so gifted and talented as you. Cant we just drop all the ****ing ******** and go on with our lives? If you can help the kid say so, but if all youre going to do is rag on him then please TAKE IT TO PM OR SOMEWHERE ELSE. Im so ****ing tired of this ****!!!

[Tsar]

I dont see anywhere he said that he wants it done for free, do you? I dont think he expected it done for free either, all he was asking was for someone in the area that could possibly help him out. Obviously you have been so fortunate that you have never needed help from another human being before. I wish we were all so gifted and talented as you. Cant we just drop all the ****ing ******** and go on with our lives? If you can help the kid say so, but if all youre going to do is rag on him then please TAKE IT TO PM OR SOMEWHERE ELSE. Im so ****ing tired of this ****!!!
tissue? :lol:

[Ian]

tissue? :lol:

jon would squash you!

I'd TIG it for ya, but I dont have a welder. sorry bro.

[Tsar]

jon would squash you!


riiight :laugh:

[project89]

hey wayfast ill do it for u,if u can get the parts over to my shop in milltown

[WayFast84]

New plan, because the headers are installed, it needs to be done on the reducer(or some thin) Im not asking for free, I was calling around all day trying to see who could do it for me, and thanks jon, im getting tired of this...

[project89]

the o2 bung shoudl be installed into the collector or right after the collector i.e reducer or intermideate pipe

[NJSPEEDER]

Like I told j0n you don't want to mig it....could distort the threads. I'd tig it to be on the safe side.

easy way to avoid that, screw a spark plug into it(yes, it i ssame thread) and weld it on. with the spark plug run in tight the bung cant' distort.

ghetto, but effective for those of us that can't afforrd TIG welders yet :)

[project89]

there is no problem mig welding in the bung if a u remove the sensor and b u chase the threads with a spark plug thread chaser after it cools,ive done it numerous times,though tig welding has less heat and leaves a much cleaner weld/without splater,and mig welding on stai8nless sux ass

[qwikz28]

matt if the car is registered i'll drive it to the welder for ya.

[WayFast84]

matt if the car is registered i'll drive it to the welder for ya.
doesnt run :rofl:

edit

got your liscence back? :rofl:

[qwikz28]

doesnt run :rofl:

edit

got your liscence back? :rofl:
this weekend jerk :finger:

[bad64chevelle]

riiight :laugh:
you laugh now...

[Mike]

I dont see anywhere he said that he wants it done for free, do you? I dont think he expected it done for free either, all he was asking was for someone in the area that could possibly help him out. Obviously you have been so fortunate that you have never needed help from another human being before. I wish we were all so gifted and talented as you. Cant we just drop all the ****ing ******** and go on with our lives? If you can help the kid say so, but if all youre going to do is rag on him then please TAKE IT TO PM OR SOMEWHERE ELSE. Im so ****ing tired of this ****!!!


and if your gonna hijack a thread to "rag" on me then take it to pm or somewhere else, ive never said i never need help and ive never said im talented, but then again half my threads dont include me begging for work to get done on my car.......

its VERY simple, ANY exhaust shop can install an O2 Sensor bung for 40 bucks or less, and theres most likely one within 10 minutes of your house.....

oh and mufflex mig-ed the o2 bung into my pacesetter ypipe adn the threads were fine

[WayFast84]

and if your gonna hijack a thread to "rag" on me then take it to pm or somewhere else, ive never said i never need help and ive never said im talented, but then again half my threads dont include me begging for work to get done on my car.......

its VERY simple, ANY exhaust shop can install an O2 Sensor bung for 40 bucks or less, and theres most likely one within 10 minutes of your house.....
Well then ANY of the welders AND all of the shops that were their declined being able to do it...I wasnt begging for ****, i thought people would be nice enough to help me out, apparently not.

[Mike]

what were their reasons for refusing?

[WayFast84]

I dont know, the only place I called that could do it was team rotten, but they declined because they were behind on customers bikes..

[Mike]

minekee?
midas?

[BonzoHansen]

Can't you buy reducers with 02 bungs in them already?

[WayFast84]

minekee?
midas?
they all mig.

[JSPERFORMANCE]

Yup

[Tru2Chevy]

As has already been mentioned in this thread, tossing it in with a Mig shouldn't be an issue. Just thread an old spark plug into the bung while it's being welded on.

- Justin

[WayFast84]

they still wouldnt do it, It doesnt matter any ways, Im ordering an 02 extension and a bung and Ill just take it over to lethalride's shop some time.

[project89]

just let me know when ur gonna bring it over

[WayFast84]

just let me know when ur gonna bring it overI will let you know, as soon as I get the parts.

[bokey]

I know there is a guy right by me that does welding for about $40 an hour. If you really needed it done and want to take a ~40 minute ride I can give you his phone number. What needs to go into your car to get it to work?

[WayFast84]

evap canister, i need an 02 extension and a bung welded in, some vacume plugs, coolent and my y pipe back with a slip fit on it.

[Slow 88]

evap canister, i need an 02 extension and a bung welded in, some vacume plugs, coolent and my y pipe back with a slip fit on it.


If you were close to me I would do it for free because that is not even 10 min. of work...Plus, for you guys ragging on him for the fact that he needs help well he is A KID!!! I know when I was young I asked questions and for help from the older crowd as much as possible for tips and tricks!!

[project89]

**** man im 26 and i still ask questions all the time even what with i do know,but u cant learn more if u dont ask.

[Savage_Messiah]

they still wouldnt do it, It doesnt matter any ways, Im ordering an 02 extension and a bung and Ill just take it over to lethalride's shop some time.

ummm what are you talking about, i had my highflow cat and catback installed at a meinekee, they welded in a O2 bung no problems...

[project89]

places like that arent likely to only to weld in just an o2 bung,i already told him id do it for him if he got the stuff over to my shop

[Mike]

just delete emissions...... :) no bungs needed

[foff667]

I've had mufflex mig weld in 1/2 dozen bungs for customers...2 of them got screwed up but they fixed em for me within a couple of minutes...$30 which included the price of the bung/plug...if you'd like one welded in there let me know & I'll set up a day for you at that price.

[foff667]

ummm what are you talking about, i had my highflow cat and catback installed at a meinekee, they welded in a O2 bung no problems...

yeah i think thats the one that ****ed up my wideband, dick :lol:

[Savage_Messiah]

yeah i think thats the one that ****ed up my wideband, dick :lol:

hm... on second thought... go have mufflex do it

[WayFast84]

I've had mufflex mig weld in 1/2 dozen bungs for customers...2 of them got screwed up but they fixed em for me within a couple of minutes...$30 which included the price of the bung/plug...if you'd like one welded in there let me know & I'll set up a day for you at that price.do they have 02 extensions their?

and Im waiting for the bung and the extension to arrive. when its being welded with a mig I thread the plug into it all the way first right? not thread it in while welding? cause that would be a to person job.

lethal whens the closest time you can do this to me. cause Id like my car runing real soon, if not Ill just mig it my self.

[project89]

i can do it mon threw friday between the hours of 8am-7pm

[WayFast84]

i can do it mon threw friday between the hours of 8am-7pm
I will pm you when I finally receive this.