Its official

[ar0ck]

I drive a v6 :shifty:

http://img.photobucket.com/albums/v215/FistFullOfDinero/100_4745.jpg

I think I rubbed into the paint to hard :-( This only temporary untill the panel is finished.

[Tsar]

ricer :lol:

[oh one ls1 SS]

oohhhhh its a sleeper!! it get it! haha

[WayFast84]

pretty sure its for a berger panel right?

[oh one ls1 SS]

lemmie try this again

oohhhhh its a sleeper!! it get it! haha <sarcasm>

[Little G]

I never look at badges, I look at VINs, the only true way to tell...

g

[oh one ls1 SS]

so if i pulled up to u on the street youde get outa the car adn check my VIN? lol

[2001orangess]

v6 owns... i have one too :P

[Savage_Messiah]

V6 POWAH!!

[oh one ls1 SS]

V6 POWAH!!


PPSSHHHHH.....

[oh one ls1 SS]

alex.. are you going to take the door molding off to since the other pieces are off? i just noticed it at the BBQ and forgot to ask

[Savage_Messiah]

PPSSHHHHH.....

That's the sound of me passing you?? :finger:

[oh one ls1 SS]

That's the sound of me passing you?? :finger:

:rofl: as im walking down the street or what? after im pulled over? blew up my trans again?

[project89]

turbo V6 > V6

[qwikz28]

turbo V6 > V6
NA V8> turbo v6

[oh one ls1 SS]

:stupid:

[ar0ck]

alex.. are you going to take the door molding off to since the other pieces are off? i just noticed it at the BBQ and forgot to ask

Yep, my hair dryer at home isn't hot enough to make the glue rise. I did the first 4 parts at work with a real heat gun and it worked pretty good. I just haven't had a chance to work on it, because the long one will take some time.

[oh one ls1 SS]

nice.. i wanan see how that looks when ur done im sure it will clean it up a bit more but i dont no how it'll look

[qwikz28]

nice.. i wanan see how that looks when ur done im sure it will clean it up a bit more but i dont no how it'll look
me too... and alex's car is a perfect model for mine. :w00t:

[project89]

NA V8> turbo v6
not when the turbo v6 is running(fully ported) gmpp canted valve heads,a t61 turbo/intercooled(with co2 intercooler sprayer) and a 25-50 shot of nitrous
ontop of 14 pounds of boost

[qwikz28]

not when the turbo v6 is running(fully ported) gmpp canted valve heads,a t61 turbo/intercooled(with co2 intercooler sprayer) and a 25-50 shot of nitrous
ontop of 14 pounds of boost
thats cool until all your **** breaks....


then its jacob ftw!!!!!!

[oh one ls1 SS]

not when the turbo v6 is running(fully ported) gmpp canted valve heads,a t61 turbo/intercooled(with co2 intercooler sprayer) and a 25-50 shot of nitrous
ontop of 14 pounds of boost

wweeaakkkkk :lol:

[project89]

wweeaakkkkk :lol:
lmao
2.8 with those heads will put out 1.7-2.2hp per ci n/a

[qwikz28]

lmao
2.8 with those heads will put out 1.7-2.2hp per ci n/a
:scratch:

[project89]

thats cool until all your **** breaks....


then its jacob ftw!!!!!!
im covered on the engine full forged rotating assembly,though i really whish i could have goten some 4 bolt main caps, only thing i really have to contend with is the trans and rear
but i have 3 spare auto transmissions
and one 9 bolt rear now
edit
:scratch:
1.9 x 173 ci :D

[qwikz28]

im covered on the engine full forged rotating assembly,though i really whish i could have goten some 4 bolt main caps, only thing i really have to contend with is the trans and rear
but i have 3 spare auto transmissions
and one 9 bolt rear now
edit

1.9 x 173 ci :D
o that math is all mental... thats about 350 flywheel or about 290 wheel. that, imo, is pretty impossible for a 2.8 forged motor NA

[project89]

not really i put down about 215 rwhp with a 10.-1 comp 2.8

[Savage_Messiah]

:rofl: as im walking down the street or what? after im pulled over? blew up my trans again? dropped my bike again?

one of those ;)

[qwikz28]

not really i put down about 215 rwhp with a 10.-1 comp 2.8
:throws laptop across room in frustration:

[project89]

sorry should have said stock ported head 2.8
amnd the canted valve heads are a huge improvement over even wild ported stock heads

[qwikz28]

stop messing around

[project89]

just wait another week or so till the turbo motor is done,better yet read the 60* performance bible,on what a 2.8
with a good set of heads will make for power,there wa sactually somone running around with a mechanical fuel injection setup on a 2.8 with 12.5-1,huge cam,the canted heads making around 390 hp

[qwikz28]

ok im not doubting you i'll just have to see it to believe it for myself. more power to ya dave!

[project89]

ya just dont se alot of nice 60* motors runnign around cause it aint that cheap to build one,,and its alot easier to build a v8
lmao
but **** it everyone takes a v6 camaro and drops in a v8,hell i almost did,till i decided to do something diff with this car
should be fun though,im deff shooting for mid to low 11,s or better,@ 14 psi
and the motor should be good for upto 21#'s if we can avoid detonation,and dont throw the crank out the bottom of the pan.im looking to take this motor a lil above 8,200 rpms
the highest ive ever been able to make a 2.8 rev and live so far is about 7,600 due to valve spring issues

[Savage_Messiah]

but **** it everyone takes a v6 camaro and drops in a v8,hell i almost did,till i decided to do something diff with this car

:cheers:

[oh one ls1 SS]

how did this thread get so hijacked??

no offense but i think this should be in the BL thread...not in alex's

[project89]

lmao i didnt mean to hijack it

[Savage_Messiah]

how did this thread get so hijacked??

no offense but i think this should be in the BL thread...not in alex's

BECAUSE V6'S > YOU!!!

[turbo96z28]

NA V8> turbo v6


turbo V8 > N/A V8 :twisted:

[qwikz28]

turbo V8 > N/A V8 :twisted:
BILLY FTW!!!!!!111!!!!11!

[2001orangess]

turbo V8 > N/A V8 :twisted:


like what he said

[Tsar]

hijack 101

[ar0ck]

Its because your biased. But your turbo wink wink doesnt even run right!

[12secondv6]

I dunno if we accept alex into the v6 world! He is weird!

And..... my 3.8 OWNZ the 2.8 ;)

[project89]

2.8>3.8

[V]

5.9L 6cyl FTW!!!!!!!

[12secondv6]

2.8>3.8

Run me ;)

[project89]

sure ur on end of june at e-town?

[12secondv6]

Ok.

But.... you are building a turbo car and you want to run a nitrous car in the summer?

Nitrous isn't affected by heat... turbo's are ;)

[project89]

wont bother me ,the motor is turbo/nitrous and ive got meth injection/co2 sprayer on the intercooler,car should run just fine,id run sooner of i could but im sure im gonna need that long to work all th ebugs out of the setup,and get it tuned right

[12secondv6]

Ok, got pic's?

BTW, sorry alex.... your thread got hijacked hard core!

[project89]

ill take some,im still building it,my new turbo and wastegate just showed up today finally,so prolyl by the end of the week ill have it finished to take pics.ill only show pics of the finished motor,noone gets to see what is has internally :) only give away apperance wise are gonna be the tall valve covers,and the big ass t61 hanging off the side of the motor :evil: other then that im leaving this thing close to stock appearing as i can,nos hidden on the undersides of the intake runners,msd inside the car under the dash,same with boost controler.and the no2/co2 bottle are hidden in the spare tire well

[ar0ck]

take it eslewhere dammit!!!


Well now Im not to crazy about the sleeper look. I mean the black spoiler defenitly sets it apart, but people who dont know will over look it like they did at the show today :( I need something to distinguish it from the pack just a lil bit.

Im hoping a hood would do the trick, and a lounder exhaust :lol:

[qwikz28]

take it eslewhere dammit!!!


Well now Im not to crazy about the sleeper look. I mean the black spoiler defenitly sets it apart, but people who dont know will over look it like they did at the show today :( I need something to distinguish it from the pack just a lil bit.

Im hoping a hood would do the trick, and a lounder exhaust :lol:
louder then a cutout?

[Ian]

Alex, get a CC306 and a spintech muffler and you'll be PLENTY loud :twisted:

in all honesty though, i think I liked your car better with the Z28 emblems on it. Good thing its not my car I guess :lol:

[ar0ck]

But is it possible to have a mix of both worlds?

Trust me I would LOVE to have a cam in this dog, but I dont think I can teach it any more tricks without rolling over!

I figure the exterior is defenitly done, i just want my wheels fixed, spoiler perfect, a new hood & call it a day. Now I just have to adress the dull paint.

[qwikz28]

But is it possible to have a mix of both worlds?

Trust me I would LOVE to have a cam in this dog, but I dont think I can teach it any more tricks without rolling over!

I figure the exterior is defenitly done, i just want my wheels fixed, spoiler perfect, a new hood & call it a day. Now I just have to adress the dull paint.
if your motor is as fresh as you say it is i dont see why not? lt1s can handle that with no prob

[ar0ck]

if your motor is as fresh as you say it is i dont see why not? lt1s can handle that with no prob

Its VIRGIN! My biggest problem is down-time or else I would have gone crazy along time ago.