View Full Version : where do I get wiring?
WayFast84
06-11-2006, 09:18 PM
I need lots of wiring. Is it engine spicific? some things are burned real bad. other then that It woulda been alot worse. where does the wiring meet?
http://www.google.com/search?hl=en&q=305+Wiring+Harness&btnG=Google+Search
:google:
http://giggl.in/forumpics/googlemofo.jpg
90FormulaWS6
06-11-2006, 10:02 PM
http://www.thirdgen.org/techboard/auto-detailing-appearance/370583-fire.html
WTF
maroman88
06-11-2006, 11:10 PM
OHHHH BOYYYYY someone didnt wanna admit that on this board! lol
you called the FD for that? HAHA if that **** was in my town we woulda fuccccked up your car, atleast chopped your battery cables into lots of little pieces so thered be no chance you could start it again and we'd have to get called back out for another "fire"
WayFast84
06-12-2006, 04:58 PM
It was in the garage. my cousins are firefighters and they tell me all sorts of storrys, the one that came to mind was, "this guy burned down his garage because his car cought fire" and I have an attached garage, dont give me **** for it either cause Im about pretty unstable right now.
It was in the garage. my cousins are firefighters and they tell me all sorts of storrys, the one that came to mind was, "this guy burned down his garage because his car cought fire" and I have an attached garage, dont give me **** for it either cause Im about pretty unstable right now.
ohh no, we are sooooo scared now! are you gonna kick all of our asses? :rofl:
WayFast84
06-12-2006, 05:08 PM
BYE!
deadtrend1
06-12-2006, 05:14 PM
umm ....... what I miss?
BYE!
you gonna hang yourself?
heavy_chevy29
06-12-2006, 06:04 PM
i think your best bet would be to just replace the wires that are damaged with new ones. just cut out the burn ones, solder in some new wire and then heat shrink the solder. i think that would be alot easier than replacing the whole harness.
i dont blame to for calling the fire department. id rather be safe than sorry.
maroman88
06-12-2006, 06:07 PM
whose blaming him? i just pointed out he was lucky it wasnt my FD that came lol
12secondv6
06-12-2006, 06:07 PM
Painless Wiring?
Brando56894
06-12-2006, 06:15 PM
guess your wires arent that sexy now are they matt? :rofl:
camaro2you
06-12-2006, 07:40 PM
nope painless doesnt make anything for carbed thirdgens yet.
Untamed
06-12-2006, 10:03 PM
Yeah just replace the parts of the harness that are burned out, or replace the entire harness if you're unsure what else was damaged.
Unfortunately there's nothing easy about replacing wire harnesses, especially if the parts you need to replace run through the firewall. Also check all the sensors to make sure they weren't damaged in the fire. If so DONT FORGET to put a drain pan below the block before you start yanking sensors. On a third gen, the temp sensor sending unit is (at least on late third gens) on the driver side above the axle, so not easy to get to. Check everything you can.
Thats rough you had the fire. At least you don't have to worry about getting a ride to work every day. :)
matt, this may be your chance to switch over to a regular carb and get rid of the electronic quardajet. you'll most likely have to chnage the distributor as well though, but once thats swapped over, 90% of what lookes to be damaged is no longer used, just an idea.
Tojanman
06-14-2006, 08:54 PM
u dont need "lots of wiring" you basically need all new carb wirering...ehh stupid wireing who needs the **** anyway?? cars used to be so damn simple jesus what the hell happened? lol
ZeroCool8891
06-14-2006, 09:10 PM
****ing stupid wayfast first the jack now this how about this get ride of the 3rd gen cuz form what we see you have bad luck and start something new like a BMX or Mongoose Have fun
:funny:
But on a serious note... get rid of electric.
*EDIT* I think ill do the IBTL
Tru2Chevy
06-15-2006, 02:38 PM
Matt, have you thought about just ditching the ECM and swapping to a non-CC carb?
- Justin
PS - Keep it civil up in dis piece....
WayFast84
06-15-2006, 08:00 PM
Ive come to 2 conclusions/delema
11sec car daily drive a lt1 camaro
swap in a tpi 350 and do mods that will get me gas milage including a t56 swap.
I dont want some thing half assed, and I sure as hell dont want it to happen again.
NJSPEEDER
06-15-2006, 08:07 PM
now that you have two more unrealistic conclusions in mind.....
did you think about just looking at the wiring and seeing if it can be cut/spliced and repaired?
Brando56894
06-15-2006, 09:14 PM
:stupid:
WayFast84
06-15-2006, 09:25 PM
STFU all of you! Im sick of this ****!
Brando56894
06-15-2006, 09:28 PM
make us :-P
WayFast84
06-15-2006, 09:42 PM
You know what, I said to my self yesterday, That this wayfast **** has to stop and its time to grow up. I really am starting to think its not me, and its every one else who has something up their ass, you judge me here, like this, But you really have NO idea what you miss, because you have to be so god damn harsh..
You know what, I said to my self yesterday, That this wayfast **** has to stop and its time to grow up. I really am starting to think its not me, and its every one else who has something up their ass, you judge me here, like this, But you really have NO idea what you miss, because you have to be so god damn harsh..
yea all the people that dont like you are wrong and you're the only one whos right, uh huh. sure buddy. do come up with some more stupid ideas.
Untamed
06-16-2006, 08:35 AM
I smell a lock comin' towards this thread.
Personally, I'm still learning myself so any wisdom thrown around on this board is useful.
STFU all of you! Im sick of this ****!
Huh? The only 2 people that replied to the post you made before this one was the admin and brandon. :roll:
NJSPEEDER
06-16-2006, 02:38 PM
i think the first thing you have to accept here is that not everyone "hates" you. tsar does, but god hates him anyway, so that really doesn't count.
i was jsut trying to point out that you took your own thread off topic. you started out with a legit question and went into talking about yet another drivetrain combination.
all you have to do is keep your posts on point to avoid getting bagged on.
i think the first thing you have to accept here is that not everyone "hates" you. tsar does, but god hates him anyway, so that really doesn't count.
ohh noooes! everyone hates me too, i will leave now. OMGWTF :lol:
Tojanman
06-16-2006, 04:41 PM
Matt...tim is right you gotta think realistically just salvage what you have and keep it simple..less pressure on you and expessially your wallet
WayFast84
06-16-2006, 04:49 PM
Well I dont have alot of time left on the motor, You know the condition I got the car scott, you know how sludgey the oil was when we changed oil! It looks like I will run a tbi set up.
NJSPEEDER
06-16-2006, 06:27 PM
to run TBI you have to convert the computer and harness along with changing intakes again, converting to an electric pump, plumbing in fuel return lines and all the other fun of going to fuel injection.
keep it simple matt!!! the wires are all different colors. pull the wire loom off the burned part and start at one end. take one wire at a time and follow it acrossed the burned section. if jsut the sleeving is cooked, throw some electrical tape on and call it done. if wires are damaged, cut out the f'ed up part and splice in soem fresh wire that is the same thickness.
you keep talking about conversions to different inductions adn engines and everything else. just work with what you have. if the LG4 does in fact die at some point you can always swap all the same stuff onto another 305 or 350 or any gen1 SBC if you want. even then, you will get to enjoy a running car for a while and learn a lot while you work on it.
NJSPEEDER
06-16-2006, 06:28 PM
ohh noooes! everyone hates me too, i will leave now. OMGWTF :lol:
not everyone, jsut god. although he is more powerful than everyone, so that coudl actually be worse. :p
Brando56894
06-16-2006, 11:48 PM
nah dont listen to him, everyone hates you :lol:
not everyone, jsut god.
:-D
http://www.orlyowl.com/upload/files/JESUS_********
Firebird67dude
06-18-2006, 10:00 AM
Wait. 3rd gen matt sie tracked his own thread? DAmn that sux. If i were u i'd just splice in new wire. It isnt that hard. If ur serious about a trade... I'll trade u a totaly taken apart Old 305 motor for ur WHOLE car. Then ill spend a few hrs on a sat to fix the wiring. Then tear up the streets in ur car which will then be my car. I'll do this until i realized im in a turd gen then drive it back to ur house had u the title and be done with it.
Only thing i had close to a fire was in the 67. besides the 18 foot flames with the open headers, i put a torker II manifold on it. My buddy was helping me. I went inside for something so he put the carb on for me. Came back out looked it over and started the car. One foot flames decided to make its wayt out the pass. side underneath the carb. Damn moron friend didnt replace the gasket and with out taking the carb off i could see it. So about 30 mins later i was tearing up the streets and my hand hurt cuz i bitch slapped my buddy until he couldnt talk.
Why dont u like space station? I meet him the other night at hooters. Cool guy. Funny too. Any how i think u should have ur moms drive u around till u ppl. find a garage with an ASE certified sign and bring ur car there. This is why i will not let MY 14 yr. old bro touch my car.
trashman01
06-18-2006, 01:17 PM
Why dont u like space station? I meet him the other night at hooters.
cuz tsar gets a raging hard-on from being a complete ******* to matt.
matt, take off the covering and look at the wiring, replace anything that looks melted. its just safer then find out what really went wrong that way u kno what needs to be fix so ur not re-doing ur wiring:nod:
cuz tsar gets a raging hard-on from being a complete ******* to matt.
matt, take off the covering and look at the wiring, replace anything that looks melted. its just safer then find out what really went wrong that way u kno what needs to be fix so ur not re-doing ur wiring:nod:
im an ******* to stupid and fat people because they deserve it. If you havent noticed other members dont really have a problem with me. i mean is it so hard to educate yourself on simple things and stop being a complete retard. go to howstuffworks and read the whole entire website if thats what it takes for him to learn anything. i know some people are way slow when it comes to learning but i dont think anyone is quite as retarded as wayfast. **** even look at this thread how many times does each member have to restate what was said before. and what does wayfast do? puts up his roasted car for trade, for a 4th gen! :rofl: riiight. i cant stand stupidity, i wish there was a population control and i was in charge.
WayFast84
06-18-2006, 02:11 PM
If you cant stand stupidity why are you still alive? I didnt put up a trade for a 4th gen ****tart.
If you cant stand stupidity why are you still alive? I didnt put up a trade for a 4th gen ****tart.
Is that the best you can come up with, a ****tard? i feel bad...nahh not really. Im actually pretty smart. Most likely you'll never be able to reach my level, its just honest to god truth. Most likely at one point in your life you'll end up asking me if i want fries with that or if you can shine my shoes for a few extra quaters. But hey its ok the world needs people like you too. Oh about your trade, one of the cars that you want to trade your "roaster" for is 4th gen, so yes u did put it up. Why dont you go back to highschool kiddo.
ohh and 2 moutnain bikes and 500 bucks offer still stand, PM me when you're ready to trade.
Thy Wayfast84 quote "****tart", not "****tard" :-D
And I second the whole trade for 4th gen, thats what you said in classifieds. You might be able to get Kasey's 4th gen... if he totals it. Its just common sense man, you just need to manage your thoughts cuz talking to you is like talking to a crowd of kids with different opinions and plans on different things... you change plans like a mother changes a newborn's diaper... you wouldnt be getting picked on this much if you did the C:>Format Mod to your several alter egos. Nobody hates you, its just that most people just find you annoying and irritating with the way you post ****. No hard feelings tho
IBTL :rofl:
WayFast84
06-18-2006, 02:43 PM
Is that the best you can come up with, a ****tard? i feel bad...nahh not really. Im actually pretty smart. Most likely you'll never be able to reach my level, its just honest to god truth. Most likely at one point in your life you'll end up asking me if i want fries with that or if you can shine my shoes for a few extra quaters. But hey its ok the world needs people like you too. Oh about your trade, one of the cars that you want to trade your "roaster" for is 4th gen, so yes u did put it up. Why dont you go back to highschool kiddo.
ohh and 2 moutnain bikes and 500 bucks offer still stand, PM me when you're ready to trade.
Im not the one feeding old people am I?
TransAm619
06-18-2006, 05:31 PM
Im not the one feeding old people am I?
:owned:
NJSPEEDER
06-18-2006, 05:37 PM
since you guys clearly don't know how to act......THE END!!!!
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.