10 Bolt w/fresh 4.10's, Rebuild, and Girdle - SOLD

[Fastbird]

I pulled the 10 bolt out of the purple car today. It has a freshly installed Thunder Racing gear package consisting of Strange 4.10 gears, Ratech Master rebuild kit (bearings, ect), and an Aluminum Girdle w/Thunder Racing engraved into the back portion. This setup cost me $1000 for purchase and installation less than 1000 miles ago. When the gears were installed, I had the shop go over the rear end and everything checked out fine. The gears have a bit of whine between 45-60 and that's it, I figure it's from the backlash which is set at the tight end of the spectrum. It has been torn apart and inspected and everything was wearing fine at teardown. BTW, the oil residue all over the rear is from the multitude of oil leaks common on the motor. The rear itself is NOT leaking. This is a 3 Channel ABS NON-TCS rear from a 93.

With the money I just dropped on it, I'm taking a pretty good hit. As such, I'm asking $500 for the rear end.

Pics:
http://i72.photobucket.com/albums/i177/Fastbird93/For%20Sale/InCar.jpg
http://i72.photobucket.com/albums/i177/Fastbird93/For%20Sale/CoverPlate.jpg
http://i72.photobucket.com/albums/i177/Fastbird93/For%20Sale/10Bolt.jpg

[Fastbird]

bump

[Savage_Messiah]

well if you can't sell it at the price, I'd be willing to buy the girdle and stud kit off it seperately

[Fastbird]

well if you can't sell it at the price, I'd be willing to buy the girdle and stud kit off it seperately

Tell you what, I'll sell you the stud kit and girdle for $500. Comes with a complimentary rear end with 4.10's and a fresh rebuild to do with as you wish. :D

[foff667]

:rofl:

[Savage_Messiah]

:lol: slick

[98tadriver]

Tell you what, I'll sell you the stud kit and girdle for $500. Comes with a complimentary rear end with 4.10's and a fresh rebuild to do with as you wish. :D


LOL!!!:laugh: im sure someone will buy it!

[Fastbird]

Still for sale. Willing to take reasonable offers. This is a smoking deal for anyone wanting to do gears as it will cost at least this much for JUST gears and installation.

I also forgot to mention that this rear end also has Lower Control Arm relocation brackets welded on.

[WayFast84]

im intrested but 4.10's might to big for me and or ill need new wheels

[Fastbird]

im intrested but 4.10's might to big for me and or ill need new wheels

Are you talking about the tire diameter in relation to gearing?

[WayFast84]

no Im talking about having an a4 and thirdgen wheels

[Fastbird]

Ah gotcha.

[qwikz28]

very very tempting.... i can use a 4.10 setup to drive around with before i get my 12 bolt :scratch:

[Frosty]

very very tempting.... i can use a 4.10 setup to drive around with before i get my 12 bolt :scratch:

You parts whore :rofl:

[qwikz28]

You parts whore :rofl:
i need rehab :(

[Fastbird]

very very tempting.... i can use a 4.10 setup to drive around with before i get my 12 bolt :scratch:

You know you want to!!! It would be fun.......and then when you get your 12 bolt you can slap the slicks on this 10 bolt and see what may or may not happen. Lots of fun!!!!

[Firebird67dude]

Anyone serious or not? I know this will go right into my car in like a blink of an eye. I want 4.10s too. I could buy it most likely the end oif this week with my pay check. I'm going to assume its a true posi? I'll let u know.

[qwikz28]

Anyone serious or not? I know this will go right into my car in like a blink of an eye. I want 4.10s too. I could buy it most likely the end oif this week with my pay check. I'm going to assume its a true posi? I'll let u know.
i wouldnt be able to pick it up for a while so i guess you have the green light before me.

[Fastbird]

Anyone serious or not? I know this will go right into my car in like a blink of an eye. I want 4.10s too. I could buy it most likely the end oif this week with my pay check. I'm going to assume its a true posi? I'll let u know.

Yeah, it's the factory posi from the 93 that it came out of. I had the shop check it out while everything was apart and it's good to go. Let me know man.

[Firebird67dude]

Yeah, it's the factory posi from the 93 that it came out of. I had the shop check it out while everything was apart and it's good to go. Let me know man.

Yea. I gotta figure out how to get it and not have my step pops find out. Where the hell is sicklerville?

i wouldnt be able to pick it up for a while so i guess you have the green light before me.

Dont u have an LS1 maro? Idk i thought the rear were differant.

[Fastbird]

Sicklerville is right off of exit 45 (I think, it's the LAST expressway exit before merging with route 42) on the Atlantic City Expressway. Look for Turnersville and you're almost there.

Also, if you don't want step-dad finding out, bring your car down and I'll help you toss the rear in the car. It should only take a couple three hours.

[Firebird67dude]

Sicklerville is right off of exit 45 (I think, it's the LAST expressway exit before merging with route 42) on the Atlantic City Expressway. Look for Turnersville and you're almost there.

Also, if you don't want step-dad finding out, bring your car down and I'll help you toss the rear in the car. It should only take a couple three hours.

Damn. see either way he'd find out. I have a fresh 3.73 rear right now. So i wanna keep it. Anyuhow he basicly gavce me a big No and if i do it i need to find a new house to live in. So basicly im out. This sux.

[Fastbird]

Ah, no biggie. Actually, I see that you've got a 93. You don't want 4.10's with a stock 93 Tranny, M28 or M29. That would essentially equate to a 4.34 in a 94+ car. Only reason why we had 4.10's in our 93 in the first place was because it's an A4 to M6 swap with a 95 tranny.

[Firebird67dude]

Yea. MY car is a 6 spd. I wanted 4.10s originally but my pops said no. Now i wish i just did it anyway.

[qwikz28]

if Tim isnt taking it can I? granted of course it would fit. also, would you also be able to come part way and meet me up by say exit 80 something? i would be coming from NY

[j0n]

I'm buying it already...will be picking it up next week

[Fastbird]

Thanks j0n.......I forgot to update this last night.