summer clean up

[project89]

once again
350 4 Bolt main block Bored/honed .030 over Cleaned and painted $400
1 set sbc 5.7 rods w/arp wave lock bolts(resized/shot peened/fluxed) $150
1 original 350 crank-mint not cut under $100
1 b&m converter for 700r4/2004r/4l60e 30 spline 2,500 stall used 600 miles $250
1 set mint t-tops (3rdgen) with key $100
1 3rdgen 4 wheel disc brake master/prop valve $50
1 set gm bowtie heads w/port matched edelbrock victor jr intake/and holley 750 dp
will not split up (Make Offers)
1 set front calipers 3rdgen $60

[NJSPEEDER]

can you shoot me specs on the bow tie heads?
milled?(what CC are the chambers?)
valve sizes?
angles on valve job?
what springs/retatiners/locks?
got flow sheets?

[project89]

will do will even get pics tom

[project89]

neg on pics and specs today,didnt goto work,its gonna have to wait till next week

[project89]

tim
64 cc
2.02-1.60 stainless manley valves
pioner springs,locks/retianers good for .550 lift
^^ not the original springs for the heads(they had been taken off for another set of heads,and those got thrown on just to keep eveything together

[SamhainZ28]

what year camaro are the tops off of? glass or lexan?

[project89]

87 glass i quess never paid much attention to them

[project89]

ttt