Rob WS6
07-10-2006, 11:01 AM
PARTING OUT!!! See below for individual prices!:)
Hey all, Ive got an Lt1 for sale. This came out of a '95 Trans Am I parted out... I planned on swapping it into my 'vert, but I decided to just stay with a regular sbc, dont feel like doing all the wiring and **** for it. I picked up an l98 to drop right in, so this has gotta go. The engine has 104,000 miles on it, and ran AWESOME. Had great oil pressure. I wouldnt have planned on using it if it didnt run great... thats why I bought the car to part out. If you plan on swapping this into a 3rd gen, then 95 OBDI is the one you want!
-1995 Lt1, aluminum headed from an fbody
-OBDI PCM and ALL wiring (you can even have the ENTIRE interior wiring harness too if you want it). Harness and PCM is for an M6 transmission... TRANSMISSION IS NOT FOR SALE!!! Engine will come with a stock flexplate, NOT flywheel.
-NEW opti, installed for about 1,000 miles, with reciept and remaining warranty
-TB airfoil
-AFPR installed
-Granitelli MAF
-All front accessories
-Radiator, dont know if its good but you can have it
-Dual fan setup from same car if you need it
-All sensors and anything else that go with it
I was going to install a cc305 cam in it, but never got that far. Only thing I took off was the rocker arms, then decided to go the different rout. Ill put the rockers back on if youd like, or will leave them off if you want to go with RR's. Ive also got a set of Comp Cams magnum 1.6 roller tip rockers that can go with the motor as well.
$1000 for everything listed!!!
Can also deliver within 100 or so miles for the price of gas.
Hey all, Ive got an Lt1 for sale. This came out of a '95 Trans Am I parted out... I planned on swapping it into my 'vert, but I decided to just stay with a regular sbc, dont feel like doing all the wiring and **** for it. I picked up an l98 to drop right in, so this has gotta go. The engine has 104,000 miles on it, and ran AWESOME. Had great oil pressure. I wouldnt have planned on using it if it didnt run great... thats why I bought the car to part out. If you plan on swapping this into a 3rd gen, then 95 OBDI is the one you want!
-1995 Lt1, aluminum headed from an fbody
-OBDI PCM and ALL wiring (you can even have the ENTIRE interior wiring harness too if you want it). Harness and PCM is for an M6 transmission... TRANSMISSION IS NOT FOR SALE!!! Engine will come with a stock flexplate, NOT flywheel.
-NEW opti, installed for about 1,000 miles, with reciept and remaining warranty
-TB airfoil
-AFPR installed
-Granitelli MAF
-All front accessories
-Radiator, dont know if its good but you can have it
-Dual fan setup from same car if you need it
-All sensors and anything else that go with it
I was going to install a cc305 cam in it, but never got that far. Only thing I took off was the rocker arms, then decided to go the different rout. Ill put the rockers back on if youd like, or will leave them off if you want to go with RR's. Ive also got a set of Comp Cams magnum 1.6 roller tip rockers that can go with the motor as well.
$1000 for everything listed!!!
Can also deliver within 100 or so miles for the price of gas.