raked look?

[WayFast84]

How to I get my car to sit like this, with a some what raked but low look, I pmed the guy who owns this car and he said its 2 lowering springs up front and cut nearly 2 icnhes stock springs in the back heres the pic
http://i8.photobucket.com/albums/a46/00ss4780/100_0453.jpg

Is their a kit that I can get to do this? or will I have to buy 2 different lowering springs? I deffinatly dont want to cut my springs

Maybe 2 inch lowering dprings up front and ws6 springs in back?

[qwikz28]

that car isnt raked. it just has lowering springs and big tires out back ;)

[98tadriver]

i like that pic of that white camaro

[1984camaroz28]

set of qa1s all around and u can make it sit how ever u want

[WayFast84]

set of qa1s all around and u can make it sit how ever u want
link?

[1984camaroz28]

u whould have to go with a set of coil overs i forgot u have a 3rd gen:laugh:

[Ian]

that car isnt raked. it just has lowering springs and big tires out back ;)

:stupid:

how about you just lower your car 1 inch and be done with it.

[WayFast84]

Ive seen what my car looks lowered 1- 1/2 it doesnt look good
Id need to have it lowered like that for it to look good, remember I dont have ground effects

[Ian]

that camaro that you linked to doesnt have ground effects either.

[deadtrend1]

that camaro that you linked to doesnt have ground effects either.

TOUCHE!

[chrisfrom nj]

thats a nice car sometimes people cut the stock springs or heat them up to get the car lowered

[84HOtransam]

http://myspace-073.vo.llnwd.net/00236/37/03/236263073_l.jpg

thats cut v6 springs front, new v8 rear springs...

the front was too low and rode on the bump stops but it looked cool

[chrisfrom nj]

http://myspace-073.vo.llnwd.net/00236/37/03/236263073_l.jpg

thats cut v6 springs front, new v8 rear springs...

the front was too low and rode on the bump stops but it looked cool
the car looks good

[ar0ck]

They don't call it the redneck rake for nothing. Don't do it the ghetto way get it done right the first time... coil overs.

[unstable bob gable]

Thats a good lookin' Camero.

[r0nin89]

I gotta agree drop springs in the front and big tires in the back.

[IROCZman15]

or the REAL right way... and get some 2" drop spindles.. like i got

-they dont make them anymore, havent for years, and years...somehow 6 years ago, i found a set on ebay, snatched em up

search around, maybe u might get lucky and find a set... otherwise an eibach pro kit (2" drop) is allt hat you can do, dont cut springs

[Batman]

What size tires you have? with an 84 you will almost definately run into wheelwell clearance issues with anyhting over stock sizes, and maybe even the stock trans am sizes if you don't do more work to the car.

[BonzoHansen]

Drop spindles can be problems, at least on older cars - I can't speak to these goofy strut cars as much. A lot of guys report clearance issues with drop spindles and wide wheels - they hit the outer tie rod. It can also limit brake options.

Plus a drop spring will generally raise the outside of the LCA up, offering better camber change.

[WildBillyT]

Drop spindles can be problems, at least on older cars - I can't speak to these goofy strut cars as much. A lot of guys report clearance issues with drop spindles and wide wheels - they hit the outer tie rod. It can also limit brake options.

Plus a drop spring will generally raise the outside of the LCA up, offering better camber change.

Ah, the first gen drop spindles! Yep, I've seen the same.:shock:

[IROCZman15]

well for my car, they work great, on HUGE bumps i can hear my 245's rub on the plastic inner fender part, but other than that, handling increased, stance is much better, and i went with 13" brakes, and PBR 2 piston calipers...(caliper mounts on spindles completley modified)

like i said, if u can find them, drop spindles are the best way to go.