j0n
08-08-2006, 06:25 PM
Pictures added 9/1
http://community.webshots.com/album/553707890LXObQt
Aluminum lt1 heads - $200 SOLD
Lt1 intake manifold w/ fuel rail and 24# injectors - $100 SOLD
another set of stock 24lb injectors - $30 SOLD
Lt1 throttle body w/ airfoil - $50
Lt1 valve covers - $40
Stock LT1 camshaft - $80
Stock LT1 shortblock - $150 SOLD
Stock LT1 intake elbow - $20 SOLD
Complete AIR system - $20
Stock LT1 mafs - $50 SOLD
Stock LT1 A/C compresser - $20
Stock LT1 accesory bracket - $30
Stock LT1 power steering pump - $20
95 vented optispark w/ 20k miles(guarunteed to work) - $120
Aftermarket:
CC306 Camshaft w/ 500 miles - $200 SOLD
K-motion 800 springs with titanium retainers and 7* locks w/500 miles - $250
Comp beehive springs with upper and lower retainers w/ 7* locks for install on LT1s - $300
GMPP "scorpion" 1.6 roller rockers(3/8, NSA) - $300
Joe Overton custom grind cam(cc306 power at a lower rpm) - $300
Cloyes double roller timing chain - $50
CSR electric H2O pump(comes with relay and all wiring) - $150
Electric H2O housing w/ heater and oil cooler hoses blocked off - $20
93-95 exhuast "system"...consists of an s-pipe that bolts directly to your catalytic converter to a glasspack with a turndown at the rear axle(this thing sounded amazing and many members that heard it can back me up on that) - $80
Underdrive crank pulley - $50 SOLD
Red "over the valve cover" 8mm plug wires(side mount) - $75
SVO 30# injectors - $200
All parts are + shipping...All parts can be delievered for the price of gas both ways assuming 25mpg.
http://community.webshots.com/album/553707890LXObQt
Aluminum lt1 heads - $200 SOLD
Lt1 intake manifold w/ fuel rail and 24# injectors - $100 SOLD
another set of stock 24lb injectors - $30 SOLD
Lt1 throttle body w/ airfoil - $50
Lt1 valve covers - $40
Stock LT1 camshaft - $80
Stock LT1 shortblock - $150 SOLD
Stock LT1 intake elbow - $20 SOLD
Complete AIR system - $20
Stock LT1 mafs - $50 SOLD
Stock LT1 A/C compresser - $20
Stock LT1 accesory bracket - $30
Stock LT1 power steering pump - $20
95 vented optispark w/ 20k miles(guarunteed to work) - $120
Aftermarket:
CC306 Camshaft w/ 500 miles - $200 SOLD
K-motion 800 springs with titanium retainers and 7* locks w/500 miles - $250
Comp beehive springs with upper and lower retainers w/ 7* locks for install on LT1s - $300
GMPP "scorpion" 1.6 roller rockers(3/8, NSA) - $300
Joe Overton custom grind cam(cc306 power at a lower rpm) - $300
Cloyes double roller timing chain - $50
CSR electric H2O pump(comes with relay and all wiring) - $150
Electric H2O housing w/ heater and oil cooler hoses blocked off - $20
93-95 exhuast "system"...consists of an s-pipe that bolts directly to your catalytic converter to a glasspack with a turndown at the rear axle(this thing sounded amazing and many members that heard it can back me up on that) - $80
Underdrive crank pulley - $50 SOLD
Red "over the valve cover" 8mm plug wires(side mount) - $75
SVO 30# injectors - $200
All parts are + shipping...All parts can be delievered for the price of gas both ways assuming 25mpg.