PDA

View Full Version : help me out right quick

TransAm619
08-10-2006, 03:05 PM
ok, so im nightshading my turn signals today.. i got all the bolts off the front signals but i cant wiggle the damn things out. Taking the headlight out isnt an option so does anyone have any ideas or what im doing wrong? i mean, its off.. i just cant wiggle it out of its hole.. it moves all over but not enough to take all the way out...

-adam
qwikz28
08-10-2006, 03:09 PM
this is what i used adam...

http://www.ls1tech.com/forums/showthread.php?t=73032&highlight=clear+corner+write+up

good luck homie
ar0ck
08-10-2006, 03:57 PM
It should just be the three bolts one on each side and on in the middle and they push out not in.
enRo
08-10-2006, 04:33 PM
Ummm... removing headlights are like 80% mandatory, unless u can use a cheerio as a bracelet... i took my headlights out... takes 5 minutes each headlamp, and about 5 minutes to remove the turn signals. Its a hellova lot easier, especially on the paint.
qwikz28
08-10-2006, 04:38 PM
Ummm... removing headlights are like 80% mandatory, unless u can use a cheerio as a bracelet... i took my headlights out... takes 5 minutes each headlamp, and about 5 minutes to remove the turn signals. Its a hellova lot easier, especially on the paint.
i used masking tape