clean up time

[project89]

#1 T04E stage 5 turbo .63/.50AR - 300$
#2 blitz style bov - 75$
#3 turbo xs bov - 75$
#4 misc silicone couplers
2.0 to 2.5 inch 15$
three 2.5 inch couplers 25$ for all
two 2.5 to 3.0 inch couplers 25$ for both
#5 misc nitrous an feed lines $30's each
#6 2,400 stall B&M converter 30 pline 700r4 250$'s
#7 1 set third gen mid length headers $100
#8 edlebrock 650 carb 100$'s
#9 edlebrock air gap 100$'s
#10 walboro 255lph pump new in box 100$'s
#11 new weld draglites with hoosier 26x9x15 non dot slick do5 compound 2 passes no burnouts 450$'s
#12 misc gauges
autometer water temp phantom 15$'s needs new sender
faze afr 50$'s
faze boost/vac 50$'s
more will be added

[project89]

#1 regal turbo (draw threw carb style) 150# .83/.60AR
#2 misc injectors
3.4 injectors 25$'s
350 tpi injectors 25#'s
30# injectors 100$'s
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
#6 vortec 6-1 fmu 80$'s
#7 2 cherry bomb turbo mufflers offest in/out 2.5 inch 20$'s
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower crank for 60* motor 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$'s
more to add later
slicks = pending sale
fuel pump = pending sale
all turbo stuff except the regal turbo = pending sale

[project89]

2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

nitrous stuff
#1 5 pound no2 bottle Make offer
#2 10 pound nx bottle make offer

misc stuff
#1 tpi/v6 camaro dual snorkle air box make offer
#2 ram air conversion kit for thirdgen camaros make offer

cars
#1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo needs paint/minor body work and a head liner 1Le swaybars/springs wonderbar/and custom stb brace make offer

[Tru2Chevy]

#1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo needs paint/minor body work and a head liner 1Le swaybars/springs wonderbar/and custom stb brace make offer

Care to sell the hood from it?

- Justin

[project89]

no i dont have another hood to put on the car,unless u can find me one the right color lol

[Tru2Chevy]

no i dont have another hood to put on the car,unless u can find me one the right color lol

PM Sent....

- Justin

[project89]

car/w turbo setup is pending a trade in on another car.

[Untamed]

The dual snorkel airbox, is this an original or home made? Is it the large round box that fits carb or TBI cars?

[project89]

ist original,but its a tpi box

[WayFast84]

how much for the regal turbo?

turbo lg4!!!!!!! lol

[project89]

i thought u were buying that engine from me
its 150$

[WayFast84]

i am getting the engine from you..

I just wanted to see how much you wanted for the turbo, because it said blow through carb style or what ever

[project89]

draw threw

[97ws6]

My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com

[project89]

My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com
its gone,i may be able to get another though
updated list
2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

#1 regal turbo (draw threw carb style) 150# .83/.60AR
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
this stuff i really need gone
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower forged crank for 60* motor (3.1/3.4 or used to stroke 2.8 to 3.1/3.4L 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 .030 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$
or take complet longblock for 2,300$'s

[project89]

delete this thread plz