Log in

View Full Version : rear brake hoses

Draven94blackbird
09-04-2006, 11:03 AM
on a forth gen disk rear are the rear hoses the same. autozone only had one so i bought it then went some place els and they gave me a longer one. is this right or they the same?
autozone on the right
http://img529.imageshack.us/img529/1311/niniqb1.jpg (http://imageshack.us)
Savage_Messiah
09-04-2006, 02:38 PM
give me a call at some point today
NJSPEEDER
09-13-2006, 06:58 PM
the one on the right looks like it has a banjo fitting on it, like front brakes would use.
i thought the rears of 4th gens only had the one flex line from the chassis to teh rear housing and then it was all hard line to the calipers?
Draven94blackbird
09-13-2006, 08:25 PM
ya it ended up to be the right hose, and that hose goes to the end of a hard line, then the hose to the caliper. the drum setup is a hard line
BonzoHansen
09-13-2006, 08:56 PM
the one on the right looks like it has a banjo fitting on it, like front brakes would use.
i thought the rears of 4th gens only had the one flex line from the chassis to teh rear housing and then it was all hard line to the calipers?
IIRC, the iron 3rd gen calipers only had one hose (RH side maybe?). I thought the 4th gen PBRs used 2.
Savage_Messiah
09-17-2006, 01:15 AM
the one on the right looks like it has a banjo fitting on it, like front brakes would use.
i thought the rears of 4th gens only had the one flex line from the chassis to teh rear housing and then it was all hard line to the calipers?

hard line to the nd of the axle tube basically then a short soft line to the caliper from there