PDA

View Full Version : 89 350tpi/700r4 drivetrain for sale


V
09-10-2006, 05:25 PM
I am selling the motor and tranny removed form a 1989 Iroc(Not the Monte setup). I was going to use this drivetrain in my 88 iroc vert but i recently sold that car.
The 89 iroc had only 68k original miles and the motor is the 350tpi, MAF but no 9th injector. tranny is the 700r4 4 speed automatic.

The setup is complete with engine, transmission, all accesories, exhaust manifolds, full tpi setup, dual snorkle air box, dual fans, engine harness, ecm.
Distributor not shown but it is included(it was removed to make it a lil easrier to pull engine)

I am asking $850 for everything, or make me an offer, This is taking up too much room in my garage.

I am in the northern NJ area(zip 07624), and can deliver within a reaonable distance of NYC for a small fee to cover gas and tolls.

V
10-01-2006, 11:48 PM
ttt, i got an offer over on TGO, if no real intrest here, i may take that offer just to get this out of my garage, i want out of the parts "biz"

BonzoHansen
10-02-2006, 07:05 AM
Is that a roller motor?

WayFast84
10-02-2006, 09:00 AM
hmmm Ill check to see how much money I have in the bank, and then get back to you.

V
10-02-2006, 12:35 PM
yes its a roller, i'm 99.9% positive all tpi engines were factory roller cam.

I am replying to the member on TGO, i need this gone, i'll post back what happens.

deadtrend1
10-02-2006, 12:46 PM
From 87 and up were rollers.

Rob WS6
10-02-2006, 02:49 PM
There you go WayFast, that setup is EXACTLY what you need to drop in and go!

V
10-03-2006, 10:04 PM
ok, no response from the guy on TGO...so i'll make it available at that offered price... $650 picked up.... $50 delivery anywhere in NJ.

IF seperated...(need confirmed buyers for most before hand)
-Longblock $300
-TPI system $300
-700r4 $200
-dual fans $50
-radiator $25
-serp belt drive setup $100

r0nin89
10-03-2006, 10:10 PM
That would also be a 1piece rear main seal correct?

V
10-03-2006, 10:18 PM
That would also be a 1piece rear main seal correct?

yes.
86-up blocks were 1 peice rear main seals
87-up had centerbolt heads

Rob WS6
10-03-2006, 10:35 PM
Wayfast, get off your friggin ass and BUY THIS!!! THIS IS THE ANSWER TO ALL YOUR (and our) PROBLEMS!!!

nj85z28
10-06-2006, 04:54 PM
cant believe i missed this. PM sent!

WayFast84
10-07-2006, 12:05 PM
ughh forgot about the motor. Ill ask my mom how much I have in the bank when she gets back

WayFast84
10-07-2006, 07:36 PM
How much for the motor and trans with out the tpi system?

F tpi ;)

V
10-07-2006, 08:29 PM
400 for motor/trans without tpi. $50 delivery

WayFast84
10-07-2006, 09:16 PM
I dont want to say ill get it like the other motor, but If I can get rid of the xe262 theres a bigger chance.

so deffinatly intrested.

nj85z28
10-07-2006, 10:31 PM
damn if only you could take a deposit until i get paid!!! i NEED THAT!!

WayFast84
10-07-2006, 10:42 PM
could you diliver it on monday? Im not sure if I can yet, i need to get to the bank..

nj85z28
10-07-2006, 11:09 PM
i cant believe you would buy it without the tuned port....?

WayFast84
10-07-2006, 11:25 PM
i cant believe you would buy it without the tuned port....?
me either, im just waiting to find out what I need to get it to tpi, then if I feel like its worth it ill get it..

WayFast84
10-08-2006, 07:37 AM
You wouldnt by any chance have a tpi fuel tank,lines

I want the complete motor and tpi...

edit,

what gears is tranny set up for? for the speedo

V
10-08-2006, 11:55 AM
tank and lines are available, just needs a new fuel pump, iroc dash harness is also available.

gears were 2.77, but you could take the speedo gears out of you trans and put them in this to have it be correct.

WayFast84
10-08-2006, 03:32 PM
so this is a 230 hp motor. How much for all of that?

V
10-08-2006, 05:36 PM
with the lines, tank, pump hanger, and dash harness.. add another 200, so 200 plus 650 =850.... still an awesome deal.

Rob WS6
10-08-2006, 05:52 PM
The dash harness is key for the swap... really makes it pretty much plug and play. Wayfast, if you can swing this, you should REALLY do it. Sell or return the stuff you bought for your 305 to help with money, Summit is usually really good with returning things.

WayFast84
10-08-2006, 06:18 PM
does it come with the ecm?

I want the motor bad, but Its adding up right now, plus ill need an airbox and injectors, plus i think the wiring is way out of my ability..

V
10-08-2006, 06:33 PM
Yes, ecm is included, this is just about EVERYTHING.

i have a bird TPI airbox that i'll include with the setup in place of the camaro dual snorkle one.

Also injectors are still there, nothing was taken off the motor. distributor was pulled but is still there.

WayFast84
10-08-2006, 06:45 PM
Yes, ecm is included, this is just about EVERYTHING.

i have a bird TPI airbox that i'll include with the setup in place of the camaro dual snorkle one.

Also injectors are still there, nothing was taken off the motor. distributor was pulled but is still there.
k thanks, you wouldnt by any chance want to keep the manifolds?

so 850 delivered, I think I have 845 all together, ill try to set up a time where I can get the money out of the bank, and when ill be free, im off tomorrow but the banks arent open, might be off tuesday and wednsday to.

Rob WS6
10-08-2006, 06:59 PM
Hm, I just saw that this is out of an IROC... the dash harness probably isnt going to work for you wayfast.

WayFast84
10-08-2006, 07:23 PM
wait I have a dash from the tims 86, would that work? it was an lg4 though..

WayFast84
10-08-2006, 08:35 PM
How is a tank lines and wires an extra 200? im just finding that bs...


sorry. I guess Ill take the motor with everything offered originally for 650 dilivered and pick up the other parts from the junk yard

V
10-08-2006, 10:04 PM
then don't buy it. you find a fuel take, tpi sending unit, 3 fuel lines, and a complete TPI dash wiring harness for less than that.

I need to sell this, no dreamers anymore, SERIOUS inquries only please.

Rob WS6
10-08-2006, 10:12 PM
Tims haress wont work either without modifications.

WayFast84
10-09-2006, 09:18 AM
then don't buy it. you find a fuel take, tpi sending unit, 3 fuel lines, and a complete TPI dash wiring harness for less than that.

I need to sell this, no dreamers anymore, SERIOUS inquries only please.
dreamers? i told you ill still get the motor, im just saying how is a fuel tank, lines and wires 200? especially when the fuel pump isnt their or working, I cant use the dash wires..

hardline_42
10-09-2006, 10:43 AM
Wayfast, you can make any engine TPI with a few parts and, if you have a little ingenuity, you can bypass needing a tank and lines. PM me if you need some direction.

Tru2Chevy
10-09-2006, 11:38 AM
dreamers? i told you ill still get the motor, im just saying how is a fuel tank, lines and wires 200? especially when the fuel pump isnt their or working, I cant use the dash wires..

If you wanna go prop up a car in the yard and remove the tank, fuel lines, and a dash wiring harness, go ahead and have fun. IMO, $200 is a fair price for those parts....

- Justin

BonzoHansen
10-09-2006, 11:45 AM
If you wanna go prop up a car in the yard and remove the tank, fuel lines, and a dash wiring harness, go ahead and have fun. IMO, $200 is a fair price for those parts....

- Justin
+ 1

nj85z28
10-09-2006, 03:13 PM
Matt, this is a really great deal. I would jump all over it. This is a fair price, trust me.

WayFast84
10-09-2006, 07:07 PM
ok ok, I want this but I need to think a little more about whats best for me, and if Im really willing to spend 850 on a new motor..

I dont mean to be like this paul, but i have to

97slpss
10-09-2006, 10:20 PM
looks to me like a killer deal dude..ive been seeing that your questioning modding your 305..why not get this before you dump more into your current motor?

Mike
10-09-2006, 10:24 PM
matt, stop changing your mind on every post, for 850 you will have most of what you need, and damn near 100 more hp, the only other way you can do that for 800 bucks is nitrous.....you would be CRAZY to not buy this

WayFast84
10-09-2006, 10:26 PM
for all of the people telling me to get this. are you going to help me with the swap? no? i didnt think so..

still thinking cant think straight right now, if some one picks it up before I can make a dicision o well what am I gonna do you know>?

BonzoHansen
10-10-2006, 08:20 AM
You could carb that motor, no? Deal with the EFI later?

Tru2Chevy
10-10-2006, 08:21 AM
You could carb that motor, no? Deal with the EFI later?

Easily....

- Justin

V
10-16-2006, 10:42 PM
SALE PENDING.... finally

WayFast84
10-21-2006, 08:42 AM
SALE PENDING.... finally
good to here it paul, im sorry, its just a verry big decision to make.

Jared1970Chevelle
10-29-2006, 04:35 PM
if you carb it.... i got a brand new holley 600cfm in the box for 200 bucks lol