wtb Lg4 wiring harness and a possibly rear

[WayFast84]

a thirdgen rear with posi and 3.42 0r 3.73's
possibly an electric fan set up with wiring.
and deffinatly a ac delete box
I can trade flowtech 305 headers

NEW PARTS I NEED
86 console lid
map pocket
and
86 + stero, heat console like this http://i18.ebayimg.com/01/i/08/22/a0/51_1.JPG

[Savage_Messiah]

interested in a 4th gen rear? It bolts up fine, Teds89IROC has one, it just sticks out a little farther on each side

[WayFast84]

I would be but Im never getting rid of my gta wheels

[Savage_Messiah]

so? I run 3rd gen wheels on mine with my drag radials...

[WayFast84]

pics?

[camaro2you]

i have thirdgen wheels on mine also.

[WayFast84]

let me get pics of how far the wheels stick out?

[deadtrend1]

2 inches on each side. Looks redneckish.....

[Savage_Messiah]

yea but wayfast wants a rake so it'll only add to the appearance, lol

[wrong generation]

actualy its only 1 inch on each side

[WayFast84]

Ill pass on it, I want my car to look nice, and what ill be doing rubber will be getting all over the 1/4 panels

[Tru2Chevy]

If you plan on doing burnouts, rubber is gonna get all over your 1/4 panels anyway.

- Justin

[WayFast84]

burn outs? haha no. thats just a waste of my tires.. i got a year for the rear.. how ever I want to get the car runing asap

[WayFast84]

No one has a wiring harness?

[WayFast84]

I also need a fuel line from the pump to the carb, I need a hard line please..

[wrong generation]

burn outs? . thats just a waste of my tires..


hence the reason you take auto shop in school and get your auto shop teacher to talk to one of the local tire shops like sts so you can get used tires for free so you can do all the burn outs you want :)

[WayFast84]

my high school doesnt have auto shop..I might take votech though Im not sure yet. But I really need this wiring harness. If I cant locate one by october Ill be forced into tpi :(((((

[deadtrend1]

imed you. you can HAVE my wiring harness.

Like i said in the im, you need to solder on the 3 wired connector that goes to your tranny, from your harness onto it .... (cause mine was broken when the previous owner of the parts car took the tranny out)

and the Electric fan plug which i have, i needed it to do a field test.

The only problems i for-see is i have a electric speedoharness and im not positive but i think your speedo is cable driven. If thats the case i got the stock dash from my 86, and all you need would be a VSS sending unit .. which i got that too .. :)

And of course the electric fan, since yours is a clutch fan

[ar0ck]

I'll sell a 3rd Gen A/C box for $60

[WayFast84]

I'll sell a 3rd Gen A/C box for $60
delete?

[deadtrend1]

and ill sell you the 86 dash like we talked about