PDA

View Full Version : ATCO tonight? (10/13/06)

BluMaj24
10-13-2006, 10:01 AM
Checked out the weather, and it looks a little cold but nice. I'll prolly be going tonight with the Eclipse since it got a new tranny. It'll all be about the 87 IROC project though...once it's complete.

Weather:
Between 5 and 10:
Temp 54degrees @ 5pm to 44degress @10pm
Wind: 7ssw @ 5pm to 1 ssw @ 10pm
Humidity: 39%
Pressure: 29.97
Mrs Bandit
10-13-2006, 01:25 PM
We may be there.
Bandit
10-13-2006, 01:52 PM
Looks like a no go for tonight, We will be looking @ a new truck tonight.
Mike
10-13-2006, 02:35 PM
i may be down with the trailblazer
98tadriver
10-13-2006, 04:14 PM
i would go but my trans sucks ass and keeps popping out of 2nd gear- i kinda need that gear to run in the 12s...
BluMaj24
10-13-2006, 10:45 PM
HORRIBLE night for me. My SPEC clutch doesn't want to catch when I'm maxing out the gears...it just slips. (Say shift 1 to 2...RPM max at 6200RPM...shift...Only drops to 5500RPM...and just sticks there for a while til I assume it is time to shift again). This is my 2nd SPEC clutch...first one used to be good til 7th run...this one I can't even get a single run. The new tranny only has 26k on it...so I know it's either the clutch or the install (Which Cottman did...so it's a good possibility that it could be either).
1QWIKBIRD
10-13-2006, 11:10 PM
I went down atco tonight and there was a nice handful of 4-gen f-bodies and and half dozen or so GTO's......

Cold out that's for sure, but a good time....

I went down on a set of 16" BFG DR's and was hoping for some improved 60' times which would lead me to much improved ET's but didn't master the launch technique and only got three runs......

first run
12.81 @ 107.44 with a 2.022 short time, but I missed 4th??? (how you do that is beyond me). At the 1/8 I was 8.133 @ 91.00.....so there was potential

second run
12.51 @115.31 with a 2.034 short time, nailed all the gears.....At the 1/8 I was 8.192 @ 90.84....still didn't get out of the hole real good....

third and final run
MISSED second or was it third....I don't know, but I did improve the short time with more RPM at launch and and had a 1.95 short time, better...but still not good...

With the kind of MPH I'm putting down I should be able to get a loooow 12 high 11...but I have to get the launch down better.....

maybe next time

Chris
Mike
10-14-2006, 12:02 AM
missin gears like that, you may have an issue with the tranny mount or torque arm mount (if your still tranny mount ta)
98tadriver
10-14-2006, 01:01 AM
get m/t DR's THEY HOOK LIKE A MOFO. i cut 1.8 60's on them bogging slightly
98tadriver
10-14-2006, 01:02 AM
HORRIBLE night for me. My SPEC clutch doesn't want to catch when I'm maxing out the gears...it just slips. (Say shift 1 to 2...RPM max at 6200RPM...shift...Only drops to 5500RPM...and just sticks there for a while til I assume it is time to shift again). This is my 2nd SPEC clutch...first one used to be good til 7th run...this one I can't even get a single run. The new tranny only has 26k on it...so I know it's either the clutch or the install (Which Cottman did...so it's a good possibility that it could be either).


i would say it was the install. what spec clutch is it? i have a stage 3 that i put in myself and love it. 5800 RPM powershifts and it just grabs and grabs and grabs!
BluMaj24
10-14-2006, 06:57 PM
Ya, Cottman Transmission in Maple Shade took 3 months to install a diff and CV joint in my Eclipse....then I ended up needing a new trans once they were done. VEry displeased with the service. It's a SPEC stg 2 clutch.
BluMaj24
10-14-2006, 09:23 PM
I'm bout to convert the eclipse back to stock anyway (But the V6 headers were the biggest PITA since the engine is sideways)...The LS1 IROC project starts getting money focus in January!
Bandit
10-14-2006, 09:49 PM
This is why we did not make Atco.. Bought a 2007 Avalache.

http://home.comcast.net/~mhedmonds/2007_avy.jpg

http://home.comcast.net/~mhedmonds/saltnpepper.jpg