made it in the 9's N/A

[baddest434]

i know no big deal, so what, but i was happy :lol: been trying for a while now kept getting 10.0x but yesterday @ atco 9.91 backed up with a 9.94 N/A i know you don't care but **** it i do:wink:

[WayFast84]

thats cool and all

but

what shot where you spraying with to get the 9.13?

[enRo]

Ummm, N/A means "Naturally Aspirated", which means it was probably all motor :shrug: I could be wrong. Actually... I am right... sig says 9.13 on a 175 shot ...


Nice times tho :-D Congrats

[baddest434]

thats cool and all

but

what shot where you spraying with to get the 9.13?

can't you read matt :lol:
175

[baddest434]

and i know you guys will like this car

http://home.comcast.net/~baddest434/100_0215.JPG

[vegaken]

Nice job on getting in the 9's on motor. Hey did you see a 4th gen Camaro breaking driveshafts yesterday? My buddy was there and broke 2 different driveshafts. I could not believe it. I knew his LS1 was making some power but that is crazy.

[Tsar]

can't you read matt :lol:
175
come on now, you know if he could read he wouldnt be so stupid. :lol:


congrats old fella!

[johnjzjz]

single dig club SWEET - my sons 68 nova as well -- jz

[Firebird67dude]

Nice. Must be some ride.

[baddest434]

Nice job on getting in the 9's on motor. Hey did you see a 4th gen Camaro breaking driveshafts yesterday? My buddy was there and broke 2 different driveshafts. I could not believe it. I knew his LS1 was making some power but that is crazy.

i helped push his car off the track twice. i know he has a bobby bammann built motor in there it sounded really stout. but as soon as he launched it was such a horrible sound to hear. i felt bad for him but some guy that was there lived across the street and ran home and got him a steel shaft broke that one to. i forgot the guy w/the 4th gens name but he works with my son at CDW.

[baddest434]

single dig club SWEET - my sons 68 nova as well -- jz

is his car n/a? got some info on it? if not i understand

[baddest434]

come on now, you know if he could read he wouldnt be so stupid. :lol:


congrats old fella!

thanks you young whippersnapper :lol: andthannks everyone else

edit: can someone tell me how to get more then 1 quote into my post? so i don't have to do what i just did 3 times:rofl:

[Rich189]

nice runs and nice red camaro

[foff667]

seems everyone was getting personal bests at atco over the last few days, congrats :cheers:

[baddest434]

that red camaro was pure SEX:drool:

[jrsfast84]

i know no big deal, so what, but i was happy :lol: been trying for a while now kept getting 10.0x but yesterday @ atco 9.91 backed up with a 9.94 N/A i know you don't care but **** it i do:wink:

I was just wondering, if your running race gas, i would bump the compression up to 14.1 or higher, and a bigger cam if the heads flow over .600 lift, i think the car with them changes should be in the high 9.70's or so on motor and with a 175 shot, should go 8.80's on a good day, well thats my 2 cents. nice runs. JR1.

[baddest434]

I was just wondering, if your running race gas, i would bump the compression up to 14.1 or higher, and a bigger cam if the heads flow over .600 lift, i think the car with them changes should be in the high 9.70's or so on motor and with a 175 shot, should go 8.80's on a good day, well thats my 2 cents. nice runs. JR1.

jr we run 116 in the car. we have 12:1 comp cause we planned on driving on the streets at the time.the lift on the heads is 594.

unfortunately my pockets are that deep to go that route which would be approx 3000 worth of work. so i live with what i have. hell another 100 c.i. would get me to 8.80's also. thanks for your 2 cents though. i can't help i'm broke :lol:

[johnjzjz]

is his car n/a? got some info on it? if not i understand

its a 68 all glass but the Qs & roof its a true divisional car rear wheel base moved up 1 1/2 inches it was built in the early 90s By john D in south jersey, when super street was still 4 tenth tree 2963 with Marc in it 2950 is the class it has a 468 BBC 72 LS 6 block w/ 315 ported AFRs 12.8 to one 48cc Ross C/A t - seal Z rings 6.385 rod eagle .090 Hoffman pro stock pins ( The old man in Plainfield NJ ) super victor R 1050 DOM - 2 speed glide all super stock mods - 4 tenth brake we do them in my shop as well 4500 stall ATI TURBO spline - 456 - 12 bolt w/ the new coated gears the pro mod cars have started to use - MSD 3 AL crank trigger 2 inch hookers w/ 3-1/2 collectors ultra dyne 725 725 268 276 @.050 with a 1.7 rocker on a 110 center line it ran this year 9:35 @ 145 at island but have been plagued with problems the new motor had 10 passes and it swolled a pebble -- took it all apart 3 bent valves and the block was dug up re honed it now the piston to wall is 0.010 at the max for sure to get the scratch out of the wall -- well that take it to the track first pass down the track the electrode wire comes off the plug and does anumber on the block again different cylinder same kind of scratch so now a re bore means a re balance and a different combo that what we have all our info on so i stopped after the holidays i will decide what to do with it it sure pissed me off this year -- if some 0ne could explain in my engress how to i have film of car but have no idea how to do that but willing to try -- jz

[Knipps]

thanks you young whippersnapper :lol: andthannks everyone else

edit: can someone tell me how to get more then 1 quote into my post? so i don't have to do what i just did 3 times:rofl:

you hit the plus sign to the right of "quote" for each one you want then hit quote on the last one

[bitchincamaro]

i know no big deal, so what, but i was happy :lol: been trying for a while now kept getting 10.0x but yesterday @ atco 9.91 backed up with a 9.94 N/A i know you don't care but **** it i do:wink:

congratulations, i am kinda pissed to be honest,(not really), my car went a best of 9.92 on the bottle and your faster.

[bad64chevelle]

congratulations, i am kinda pissed to be honest,(not really), my car went a best of 9.92 on the bottle and your faster.

Frank that was an amazing run though!

Congrats to all our single digit guys!

[Jersey_TA]

AWESOME!!!!! congrats on the new best :)

[baddest434]

thanks everyone much appreciated!!

and thanks for the help there chevelle 454

johnjzjz thats some really tough luck there. very nice car and good luck on the new combo.

[WayFast84]

congratulations, i am kinda pissed to be honest,(not really), my car went a best of 9.92 on the bottle and your faster.



Frank that was an amazing run though!

Congrats to all our single digit guys!

Franks car is awsome! Im glad he got to see the 9's on that paticular shot


I didnt see it said 175 shot.. what system do you have>?

[baddest434]

nos BIG SHOT plate system

[WayFast84]

nos BIG SHOT plate system
Is that a 10 pound bottle? Youd see a benifit with a 15 pound..More bottle pressure.

[Tsar]

baddest you better listen up to wayfast, he's mad good at making cars run fast times :rofl:

[Bandit]

Congrats on the new best.. Now go win some races and make a name for yourself..

[baddest434]

baddest you better listen up to wayfast, he's mad good at making cars run fast times :rofl:

:rofl: :rofl: :rofl: :rofl: to funny

[vegaken]

The guy who broke two driveshafts was Chris. I have known him for a few years. I order all sorts of stuff off of him for my work. Great guy would do anything to help some one out if they have problems. His motor is a N/A piece. The best part about Chris' car is that he was still taking it easy on it when it broke those two drive shafts. I got to see the driveshaft over at the shop yesterday man is it bad.:shock: Bammann does know how to make some big power and can get a car down the track as well as anyone I know. I have been helping Bammann out for the last 7 years or so at the track.

[Mike]

Is that a 10 pound bottle? Youd see a benifit with a 15 pound..More bottle pressure.

negative, its just more bottle volume....as long as your setup has a heater or blanket (or high quality blow torch for our old-school crowd) bottle pressures will remain the same with either size bottle....


oh and i think these guys with nine second nitrous cars know more about bottle pressures than you, and if the pressure is off, they PROBABLY dont spray the car untill they get back in the pits to find out why, some people dont like their cars burning up matt......

[radialtireking]

Is that a 10 pound bottle? Youd see a benifit with a 15 pound..More bottle pressure.
:banghead: Maybe I should hire you to tune my car.:rofl:

Congrats on the new times Bill!

[Tsar]

:banghead: Maybe I should hire you to tune my car.:rofl:

Congrats on the new times Bill!
get fire insurance man :rofl:

[Tru2Chevy]

Congrats on the new bests!

- Justin

[baddest434]

negative, its just more bottle volume....as long as your setup has a heater or blanket (or high quality blow torch for our old-school crowd) bottle pressures will remain the same with either size bottle....


oh and i think these guys with nine second nitrous cars know more about bottle pressures than you, and if the pressure is off, they PROBABLY dont spray the car untill they get back in the pits to find out why, some people dont like their cars burning up matt......

thanks mike i was going to just let that one go :rofl:

thanks for the compliments everyone:mrgreen:

[1_Hot_SOM_WS6]

Congrats on the new best!! I am jealous.....I Wish I could do 9's (again) :smile:

[cdubbzz]

Nice job on getting in the 9's on motor. Hey did you see a 4th gen Camaro breaking driveshafts yesterday? My buddy was there and broke 2 different driveshafts. I could not believe it. I knew his LS1 was making some power but that is crazy.

i helped push his car off the track twice. i know he has a bobby bammann built motor in there it sounded really stout. but as soon as he launched it was such a horrible sound to hear. i felt bad for him but some guy that was there lived across the street and ran home and got him a steel shaft broke that one to. i forgot the guy w/the 4th gens name but he works with my son at CDW.

That was me you pushed, thanks for the help. Before I broke the second driveshaft I did mange to granny the car to an 11.47 @124mph (all motor).

The second break did the most damage by shattering the carrier/spider gears first which then caused the driveshaft to lock up etc. So now we're putting in a good steel driveshaft and spool for the 12bolt.

-Chris

[baddest434]

i helped push his car off the track twice. i know he has a bobby bammann built motor in there it sounded really stout. but as soon as he launched it was such a horrible sound to hear. i felt bad for him but some guy that was there lived across the street and ran home and got him a steel shaft broke that one to. i forgot the guy w/the 4th gens name but he works with my son at CDW.

That was me you pushed, thanks for the help. Before I broke the second driveshaft I did mange to granny the car to an 11.47 @124mph (all motor).

The second break did the most damage by shattering the carrier/spider gears first which then caused the driveshaft to lock up etc. So now we're putting in a good steel driveshaft and spool for the 12bolt.

-Chris

hey chris that was a bad day fro you!! how bad is the damages$$$$
i must say you are one cool level headed dude cause i'd have been pissed off all day. see you back in the spring chris

[camaro2you]

congrat's on the times man.

[cdubbzz]

That was me you pushed, thanks for the help. Before I broke the second driveshaft I did mange to granny the car to an 11.47 @124mph (all motor).

The second break did the most damage by shattering the carrier/spider gears first which then caused the driveshaft to lock up etc. So now we're putting in a good steel driveshaft and spool for the 12bolt.

-Chris

hey chris that was a bad day fro you!! how bad is the damages$$$$
i must say you are one cool level headed dude cause i'd have been pissed off all day. see you back in the spring chris

Spool is ~$200 & good driveshaft is ~$300 not including labor...I knew when I was getting into this game that I'll soon find out what the weakest links are and I guess I've found 'em.....

A bad day at the track is always better than a good day at work!