Koni SA'S

[FESTER]

Hey guys I just got finished installing my Koni's I removed the rear isolator and put the fronts on the lower perch the car now sits 3/4" higher in the front should it be like this or did i do somthimg wrong i checked everything is seated correctly any help!!:|

[Savage_Messiah]

you sayign front is higher than the rear, or the fronts are 3/4 inch higher than they were?

[FESTER]

The front is 3/4" higher than the rear! The rear of the car sits and looks great, but the front is higher and makes it look like the rear of the car is dragging

[Rich189]

i beleive your supposed to do the "hose mod" in the rear look it up on ls1tech ive seen it there before

[FESTER]

Yes, thats what i did removed the isolator and installed 5/8 heater hose on the top, first set of coils!

[qwikz28]

the fronts have two mounts for the perch... mount it on the lower one

[Ian]

I dont understand. you changed shocks and you gained ride height? thats not supposed to happen. shocks dont support any weight, they just control the up and down movement.

[Savage_Messiah]

Hey guys I just got finished installing my Koni's I removed the rear isolator and put the fronts on the lower perch the car now sits 3/4" higher in the front should it be like this or did i do somthimg wrong i checked everything is seated correctly any help!!:|

the fronts have two mounts for the perch... mount it on the lower one


.....

[qwikz28]

eh, maybe pics? i dont get it either. if its mounted correctly on the lower perch then the stance should be about 1/2-3/4 inch lower both front and back