ar0ck
01-24-2007, 06:13 PM
I've always wanted one of these, and I found an awesome deal on it, it should be arriving by in a week or so!
Its a 4-point Race Roll Bar from Auto Power Industries. This summer I might be going to Skip Barber racing school with my girlfriends mom who is very important in the Car & Driver world so I'm hoping this gets me jump started for when i start to try out some Auto-X! Its always been a dream of mine to road race and all that sorts. Since I got the racing seats, I figured I would complete it with a bar, and proper harness equipment.
http://www.autopowerindustries.com/rollbars.asp
http://www.autopowerindustries.com/Images/lg/DSC_2848.jpg
The Race roll bar is designed for solo, auto cross and high speed time trials. All Race roll bars have a diagonal cross brace and most have a harness mount tube.
Autopower will select tube size and type for your needs.
Race roll bars are made with 1.750 x .120 DOM steel.
Cars weighing more than 3500 lbs. use 2" x 120 ERW steel.
4 point mounting with welded diagonal cross brace.
All necessary installation and mounting hardware with back-up plates is included.
Its bolt in, but I have access to both a Mig & a Tig welder, so I can easily make it NHRA legal by adding the 2 front bars with swing outs.
Its a 4-point Race Roll Bar from Auto Power Industries. This summer I might be going to Skip Barber racing school with my girlfriends mom who is very important in the Car & Driver world so I'm hoping this gets me jump started for when i start to try out some Auto-X! Its always been a dream of mine to road race and all that sorts. Since I got the racing seats, I figured I would complete it with a bar, and proper harness equipment.
http://www.autopowerindustries.com/rollbars.asp
http://www.autopowerindustries.com/Images/lg/DSC_2848.jpg
The Race roll bar is designed for solo, auto cross and high speed time trials. All Race roll bars have a diagonal cross brace and most have a harness mount tube.
Autopower will select tube size and type for your needs.
Race roll bars are made with 1.750 x .120 DOM steel.
Cars weighing more than 3500 lbs. use 2" x 120 ERW steel.
4 point mounting with welded diagonal cross brace.
All necessary installation and mounting hardware with back-up plates is included.
Its bolt in, but I have access to both a Mig & a Tig welder, so I can easily make it NHRA legal by adding the 2 front bars with swing outs.