PDA

View Full Version : looky what i gots today

baddest434
03-20-2007, 03:52 PM
no the couch wasn't something i got today . i suck at taken pics:mrgreen:
bubba got me all scared now i have to go faster:rofl:

http://home.comcast.net/~baddest434/100_0323.JPG
BonzoHansen
03-20-2007, 03:56 PM
Tell me more about the shiny stuff....
BigAls87Z28
03-20-2007, 04:02 PM
Hrm...dizzy, wires and plugs, RP and filter...
An oil accumulator, what looks to be a billet PS pump? Some fittings, but dont know what that tall thing is...looks like it has a pulley attached to the top of it.
baddest434
03-20-2007, 04:28 PM
all the nice shiny parts areospace components pro vacuum pump system. includes vacuum pump,mandrel drive system,pulleys,mounting brackets,breather tank,stainless brd.line vacuum control valve,bung for valve cover,all fittings fot easy fit:rofl: $735 bucks

msd wires,84697 msd distributor, msd cap,msd crank trigger,plug, royal purple oil, water wetter. evrything set me back about 1300 bucks minus installation. which is FREE thanks to my son:mrgreen:
WayFast84
03-20-2007, 04:44 PM
Can you please save the old wires for me, I dont know if my old burnt msd wires will be safe/work, If ur not gonna throw them out, I understand. And damn, all that stuff looks cool, what was the old Dizzy?
johnjzjz
03-20-2007, 04:56 PM
some of those pumps pull to much vacume - we have gaged them and only let it pull 10 inches ( modify a bleed off ) -- never seen the directions on one -- to much vacume will suck in the ( cork / rubber ) gaskets under the intake front and rear - if you used silicone than that wont happen -- they work well some motors respond and some don't i hope yours does -- but if it does nothing than you may have another issue to look at -- hope you dont mind just been doing this a while and seen a lot --- jz
baddest434
03-20-2007, 04:57 PM
i'll probally be able to give you the old wires matt but i think one of them is bad. the old dist. is sold already. sorry
baddest434
03-20-2007, 05:05 PM
some of those pumps pull to much vacume - we have gaged them and only let it pull 10 inches ( modify a bleed off ) -- never seen the directions on one -- to much vacume will suck in the ( cork / rubber ) gaskets under the intake front and rear - if you used silicone than that wont happen -- they work well some motors respond and some don't i hope yours does -- but if it does nothing than you may have another issue to look at -- hope you dont mind just been doing this a while and seen a lot --- jz

john it comes with a vavle reliefto create more /less vacuum. but still recommends a pressure gauge on the valve cover to see the exact amount of vacuum in your engine
johnjzjz
03-20-2007, 05:14 PM
john it comes with a vavle reliefto create more /less vacuum. but still recommends a pressure gauge on the valve cover to see the exact amount of vacuum in your engine

i had on the last car we had one on - drilled and taped the valve cover and ran a vacume gage in side to i could see what it was doing -- do they give you an inch # that is recommended never seen instructions on one of those pumps - we always took an avarage low engine speed to max - jz
Teds89IROC
03-20-2007, 05:22 PM
o0o0o, will this make you to pull the front wheels? :lol: :lol:
baddest434
03-20-2007, 05:25 PM
i had on the last car we had one on - drilled and taped the valve cover and ran a vacume gage in side to i could see what it was doing -- do they give you an inch # that is recommended never seen instructions on one of those pumps - we always took an avarage low engine speed to max - jz

instructions say -the suggested amout of vacuum at max rpm is 10-12in/hg for a wet sump engine which is what i have.

edit: sorry about the pic size
baddest434
03-20-2007, 09:29 PM
o0o0o, will this make you to pull the front wheels? :lol: :lol:

i should hope so since it does it on motor :lol:
wasn't sure if that was sarcasm or a real question
Teds89IROC
03-20-2007, 09:33 PM
it was sarcasm, I see your sig and I have one of your videos from atco saved on my computer 8-) and seeing how you wrote that bubba got you scared it reminded me when he asked with a certain combination if he could pull the front wheels :lol:
Rafterman
03-20-2007, 09:40 PM
what has bubba gotten himself into...:rofl: :rofl: :rofl:
baddest434
03-20-2007, 09:57 PM
it was sarcasm, I see your sig and I have one of your videos from atco saved on my computer 8-) and seeing how you wrote that bubba got you scared it reminded me when he asked with a certain combination if he could pull the front wheels :lol:

:rofl: thats what i thought ted :lol: