Anyone know of any good shops to take my 98 Formula to in Central NJ?

[CALL911]

Looking for a shop who can help me out with some needed car work on my 98 Formula that is around the Central Jersey area. I know East Coast Supercharging is only a few miles away, but I have called them every day for the last 3 days and they haven't been answering their phones. I don't even know if they would work on my car because their website leads me to believe they only work on C5's, and C6's.

Anyone know of a reputable shop that won't rip me off around here?

[hardline_42]

You could try Buster's Auto in the Trenton/Hamilton area. It's on South Broad Street close to the Whitehorse Circle. When I lived in Trenton and I first got my '81 Camaro, they did all of my work for me. They work almost exclusively on F-bodies and I'm pretty sure they specialize in 4th gens.

[CALL911]

Thanks :)

[Slo86Bird]

ill take yer car. only if u never want it back again tho :nod:

[Jersey_TA]

What are you looking to get done?

[jin1481]

anybody know anything about All About Performance in Woodbury Heights?

[CALL911]

What are you looking to get done?

I am looking for a place I can get the new sub frame connecters welded in (preferrably a place that has done them before like an F-body shop). I also have some lowering springs to go in (I know I could do this at the Hobby shop here on base, but I've done it before on my 94 Formula and it was a royal PITA), and finally I will have a new master and slave cylinder to go in the car soon.

It would just be nice to know of any shops that work on or specialize in F-bodies that are reputable around here.

[CALL911]

hardline 42; to you have any contact info for Busters? They don't seem to have a website (at least any that I could find).

[Jersey_TA]

I am looking for a place I can get the new sub frame connecters welded in (preferrably a place that has done them before like an F-body shop). I also have some lowering springs to go in (I know I could do this at the Hobby shop here on base, but I've done it before on my 94 Formula and it was a royal PITA), and finally I will have a new master and slave cylinder to go in the car soon.

It would just be nice to know of any shops that work on or specialize in F-bodies that are reputable around here.

I know what you mean. None of those sound fun. The only shops I know are the major ones. Oh, you could try Harris speed in philly. I know them personally = good guys.

[hardline_42]

hardline 42; to you have any contact info for Busters? They don't seem to have a website (at least any that I could find).

Buster's Auto
609.888.0300
2467 S Broad St, Trenton, NJ 08610

[Mike]

mufflex did my subframes......

east coast did my clutch and master/slave........illl never go back or send anyone there in my life.

[CALL911]

mufflex did my subframes......

east coast did my clutch and master/slave........illl never go back or send anyone there in my life.

What was so bad with East Coast Supercharging?

[IROCdan330]

i would recommend driving across the bridge to hulmeville...right near langhorne pa. Josh at js performance does this stuff day in and day out and does excellent work. PM JSPERFORMANCE, I'm sure he can help you out.

[CALL911]

i would recommend driving across the bridge to hulmeville...right near langhorne pa. Josh at js performance does this stuff day in and day out and does excellent work. PM JSPERFORMANCE, I'm sure he can help you out.

Does he have a website?

[IROCdan330]

http://jsspeedandcustom.com/

[CALL911]

IROCDan, thanks for the link.

cbrrmike, whats the deal with East Coast?

Anyone else have shops around the area they reccomend? (Or reccomend to stay away from?)

[Mike]

they treated me like ****

[hardline_42]

Buster's Auto
609.888.0300
2467 S Broad St, Trenton, NJ 08610

Well it looks like these guys went out of business. Sucks big time since they focused on LS1 performance. I'm actually off right now to Langhorne to meet up with Josh at JS Performance. He's gonna install my Canton oil system and a new tubular K-member. He seems very well recommended on this board so I'll let you know how it goes.

[CALL911]

Well it looks like these guys went out of business. Sucks big time since they focused on LS1 performance. I'm actually off right now to Langhorne to meet up with Josh at JS Performance. He's gonna install my Canton oil system and a new tubular K-member. He seems very well recommended on this board so I'll let you know how it goes.

Thanks, please do, as it seems they might be the ones doing some work on my car now that Busters is gone.

[CALL911]

they treated me like ****

Could you be more specific? Did they do a lousy install or brake something and then tell you to go F*#% yourself? Whats the deal?

[Mike]

they put in my clutch, told me it would be done at a certain time, it wasnt, had to go get the car at 10pm. while it was there they told me that their slave was better than the 02 oem slave i brought with me so i let them put it in.

2 days later my clutch dies at atco, slave leaked all the fluid into the bellhousing and i had no pedal. had it towed home and then towed back to ecs. they put my original slave back in for free and gave me the 80 bucks back, but it took them a week. i called on a friday morning and they said it would be done, i called back at 4pm and it wasnt. they then called me at 9:30pm and said " your cars done can you come get it now, because we have an open house for our vette customers and we cant have any f-bodys taking up space, especially one in this condition"

they have a nice shop, they do good work, and they backed up their work when it broke.....but their attitudes toward me will keep me from going back

[CALL911]

they put in my clutch, told me it would be done at a certain time, it wasnt, had to go get the car at 10pm. while it was there they told me that their slave was better than the 02 oem slave i brought with me so i let them put it in.

2 days later my clutch dies at atco, slave leaked all the fluid into the bellhousing and i had no pedal. had it towed home and then towed back to ecs. they put my original slave back in for free and gave me the 80 bucks back, but it took them a week. i called on a friday morning and they said it would be done, i called back at 4pm and it wasnt. they then called me at 9:30pm and said " your cars done can you come get it now, because we have an open house for our vette customers and we cant have any f-bodys taking up space, especially one in this condition"

they have a nice shop, they do good work, and they backed up their work when it broke.....but their attitudes toward me will keep me from going back


Having taken my car to numerous speed shops over the years, I know what is common in the good ones and the bad ones. Word of mouth can make a company, and it can destroy it. Really bad shops would've over charged you, broke something, and then expect you to pay for it, have your car leave their shop overcharged, and underpowered, and then have your motor blow up, only which after they tell you, "well it had mileage on it, it could've gone anythime" (this is a long dramatic story to which I am just scratching the surface of just one bad experience I have had. Others that might not be as bad would be one that charged me $500 to try to see if the opti was bad, only to tell me the couldn't find out. Good companies tell you a price and stick to it, if something goes wrong with your car do to them they fix it for free or give you your original money back, or in some cases both. I will tell you that pretty much all companies both good and bad will always take longer than they originally told you. Being a Corvette shop, I can't say it surprises me they wanted your F-body out of the shop, since they specialize in Vette's and generally speaking the Vette guys spend more money. I think they could've been a little nicer to you, but is sounds like they at least took care of you in the end for the most part.

How were they price wise for everything?

[IROCdan330]

Thanks, please do, as it seems they might be the ones doing some work on my car now that Busters is gone.

I'm telling you man, go see Josh. Its affordable and of the highest quality i have seen.

[CALL911]

Well, after being forced to wait while UMI catches up with all their orders, and having to buy new wheels and tires for my Z back in storage, I won't be taking the car anywhere for probably another month anyways. So, it gives me a good chance to learn as much as I can about all the shops in the area. Josh is still the most likely place I will take my car to as of now. However ECS is just 5 minutes from my house unlike Josh who is 45 minutes away. Convienience is nice as well sometimes.

[hardline_42]

I have to say I was very impressed with Josh and JS Performance after my visit today. He took the time to chat with me, show me some of his current projects, and took a look at my car for free (and quickly identified my engine as an iron headed caprice/impala LT1 that had been swapped in :(. Shows you how many times I've looked under the hood of my own car). He broke down his pricing for me, talked me out of some unnecessary mods and even took the time to gawk at a set of C6 Z51 rotors that I had in my car for my '81. Needless to say I plunked down a deposit on the spot and I can honestly say I'm confident in him working on my car. Once I get the stuff installed (in about a week or two when all the parts come in) I'll let you know how it goes.

[CALL911]

Yeah let me know, as again, Josh will probably be who I go to.

[Mike]

i did say, they stood up to their work, and they did good work other then their part failing, i just didnt like the way i was treated....I wont go back, and i wont recomend them, but i wont lie

[CALL911]

Thanks for being honest and up front.

[CALL911]

I guess theres a shop up in Northern NJ as well. Here's there website> www.ttperformance.net I might be checking them out as well.

[Tru2Chevy]

TTP does do lots of work on LSx based cars, that's where we had our Dyno day last weekend. If you get in touch with them, tell them you a member of the club (they sponsor our site) :)

- Justin

[chevylover5]

like irocdan, i reccomend JS...
im a guy from over the river and iv been to joshes shop several times. id say for you its worth the drive! he specializes in fbodys and works with you price wise. just say ur a member of NJFBOA and he will work with you. iv seen him do a few cars when i was at his shop, he does a good job and knows his *****. his shop is spotless and in a decent location. its worth a try, you wont be dissappointed. just my 2 cents...
-ken

[CALL911]

Thanks for everyones input. It definatly helps if there is some experience and knowledge behind these shops, not to mention US the happy or dishappy customers.

More inputs or options welcomed!

[SteveR]

There's a really great place in Belmar, but it's almost an hour away.

[CALL911]

There's a really great place in Belmar, but it's almost an hour away.

Whats it called? What is their contact info?

[lastcall190]

Check out harris speed works in PA, where abouts in central are you? I'm down here for school.

-J

[CALL911]

Wrightstown, on base here at McGuire AFB.

[CALL911]

Has anyone heard of Rapid Motorsports? Or better yet, has anyone had an experience with them? (good or bad)

[Tru2Chevy]

Has anyone heard of Rapid Motorsports? Or better yet, has anyone had an experience with them? (good or bad)

I've heard of them, and have heard some good and some bad (same as with just about any shop). Never dealt with them personally though.

- Justin