Log in

View Full Version : vats


chrisfrom nj
04-22-2007, 11:26 AM
im getting sick of my camaro the vats is causeing my car not to start is there a way i can get rid of the vats i want to get the car running again can anyone help me

Fast92RS
04-22-2007, 11:38 AM
You can either get a reprogrammed prom to ignore vats or bypass vats with the right resistor.

98tadriver
04-22-2007, 11:43 AM
hey i thought i had the same problem, until i checked my battery terminals, be sure that you have a good connection and its not loose. those side terminals suck. if all else fails and u need to know how to disable it, hit me up on aim

chrisfrom nj
04-22-2007, 11:47 AM
wht kind of resistor do i need what size

Fast92RS
04-22-2007, 11:54 AM
Check this link out... http://tpiparts.net/vehicle_anti_theft_system__vats_/
Basically you need to measure the resitance in the factory key and thats the resitor size you use..
If there is a problem with the vats module then it may not work. Its easy to get a new prom or burn one yourself to eliminate vats with the right equipment.

chrisfrom nj
04-29-2007, 10:37 AM
You can either get a reprogrammed prom to ignore vats or bypass vats with the right resistor.who can burn me a new chip

chrisfrom nj
04-29-2007, 10:38 AM
i took out the vats box and the car still dont start

Fast92RS
04-29-2007, 06:40 PM
The computer needs a signal from the vats box that says the correct key is in the ignition. Without the vats box you need a new prom that ignores the vats signal.

chrisfrom nj
04-30-2007, 09:43 AM
the car still wont crank

Tru2Chevy
04-30-2007, 09:49 AM
the car still wont crank

The car won't crank unless you either have the vats system complete and working properly, or bypassed either by burning a new chip or installing the correct resistor.

- Justin

Fast92RS
04-30-2007, 10:59 AM
Painless has chips that have vats removed or vats bypass kits.. http://store.summitracing.com/egnsearch.asp?N=700+400012+4294908216+4294914956+1 15+4294924927