Englishtown leftovers....

[Jared1970Chevelle]

-350 4 bolt main roller cam motor 400 but mainly b/0
-600cfm holley 4barrel carb brand new in box 250 but mainly b/0
-gauge cluster round glass and bezel for 3rd gen camaro 15 but mainly b/0
-flat wing with 3rd brake light off of a blue 88 camaro 35 but mainly b/0
-fox body mustang hatch (no rear defroster and tint) 100 but mainly b/0
-Bright red 91 firebird mirror 20 but mainly b/0
-1993-2003 taillights for camaro red/white with 4 U strobe lights b4c police 150 but mainly b/0
-bbc heads oval port... 500 but mainly b/0
-1969 chevelle ss dash bezel and gauge cluster 300 but mainly b/0
-T88 88mm Garrett AiResearh turbo 1200 but mainly b/0
-SBC Edelbrock performer intake pn 4102 for vortec heads 75 but mainly b/0
-Mallory chrome ignition coil 20 but mainly b/0
-SBC Moroso valve covers painted shiny light blue metallic 30 but mainly b/0
-SBC Vortec heads ported - SOLD
-SBC Centerbolt aluminum valve covers off an iroc 30 but mainly b/0
-LED nightwipers in green made by apc performance 10 but mainly b/0
-2 sets of ttops 82-92 camaro/firebird 100 but mainly b/0
-1993-2003 taillights for camaro red/white with 2 U police Strobes in each taillight from copcar 150 but mainly b/0
-1982-1992 style Firebird Taillights nice shape 50 but mainly b/0
-rare firebird gta bag/pouch 40 but mainly b/0
-93-03 camaro/pontiac trans am stock 6 speed shifter 30 but mainly b/0
-headers for sbc various ones.... 50-200 but mainly b/0
-sbc cranks...ones a 400 crank 20-200 but mainly b/0
-sbc heads 20-200 but mainly b/0
-aluminum quadrajet 4b intake from 81 z28 75 but mainly b/0
-global west mustang tubular control arms 200 but mainly b/0
-aerospace engineering 2 piston floater brake kit..modified spindals 5 lug etc 450 but mainly b/0

- 2.3L ford SVO mustang turbo block, forged crank,rods,and dished pistons....brand new water pump, 36 lb injectors...basically a short block no head or cam for it.... 400 but mainly b/0

-richmong gears for 9" 3:50 ratio 100 but mainly b/0
3:89 ratio 100 but mainly b/0
-T/A rear end girdle cover 7.5 rear camaro s10 other gm 150
-big block fuel injection intake with rails 300 but mainly b/0
-big block MSD crank trigger - 200 but mainly b/0
- brodix big block BB2X heads ported comp cam stabelizer bars brodix valve covers they flo 370cfm 2700 but mainly b/0
-ATI harmonic balancer big block chevy
-csr flex plate fly weel 0 balanced sfi aproved 130 but mainly b/0
-comp chrome molly rockers 1.7 ratio bbchevy 250 but mainly b/0
-550 ci big block shortblock.. bow tie billit capped race block JE pistons c/a gapless rings calies 4340 rods and cola 4340 crank has roller cam to much to list....if serious will sell the whole motor for a package deal or break it up for more money track times, time slips,..head flow sheets, etc etc.... seriousss people only please... 4500 but mainly b/0...

more stuff to list once dug out....

this is what is left from englishtown..... got to get rid of it....thought id let you fellas know 1st ... pm me with questions.... or im me at venom88888 ......

AS PER FORUM RULES...prices are spur the moment due to the nazies Best offer and trades allways accepted...

best resonable offer on all....its taking up space...

[BonzoHansen]

AS PER FORUM RULES... Best offer....

All items listed for sale must have an asking price included in the initial post.
Please update.

[76bumblbrally]

how much for the 2 sets of LT 1 camaro taillights, pics to please

[Blacdout96]

do you have headlight strobes to match the taillights with strobes? and 100 bucks for the turbo

[Tru2Chevy]

Please post an asking price for each item on your list by this evening, or this thread will be deleted.

- Justin

[red97z]

PM'd you!

[Jared1970Chevelle]

Please post an asking price for each item on your list by this evening, or this thread will be deleted.

- Justin

justin not for nuthin but you seem to get on my case alot to... i have best offer listed for all the items at the bottom....

why do you nitpick my threads like the other dude gonzo....

best offer is a asking price.....


i have seen a ton of for sale stuff with best offer on here... with no asking price.....


like i said to the other dude that you deleted the post you got a problem with me or sumthin? cause if so we can work from there....

[Tru2Chevy]

I have no problem with you, other than the fact that you aren't following the rules. The only reason that any of us are "on your case" is because you have a habit of posting items for sale without listing a price. The rules clearly state that all items must have an asking price listed. That does not include "best offer".

- Justin

[Jared1970Chevelle]

edited per your forum rules GOD i mean administration....


PRICES WERE SPUR THE MOMENT AND MIGHT CHANGE WITHOUT NOTICE... sorta like my cable bill.....

[Jared1970Chevelle]

open to trades...

im looking for another nitrous kit and autometer gauges....

lemme know what else... all parts are either new or have very low miles on them....

[Slo86Bird]

what kinda sbc heads u got?

[Jared1970Chevelle]

various sets..... what are you looking to put them on... i can hook you up with a Envious Motorsports Stage 6 Street Racing MOTOR KIT.... if you got money and you aint lowballsin maybe we can get that 91 firebird of yours to see a sub 17 sec 1/4 mile lol.....

ill pm you wut i got

[Mark B]

More info on the 350 short block? It is a shortblock. Right?

Miles, components, rms, etc?

[Jared1970Chevelle]

Mark....this is the ad when i was selling it a while ago but that dude redneckslurpin was pullin my pud for like 15 weeks on getting it or not lol....

this motor was my backup motor... its for sale cause i got a deal coming to me (got a amazing deal on a ls1 so this needs to go).... this is the same shortblock motor with alot less miles then the current one in my camaro.... the motor in my camaro now has roughly 100k on it and i was spraying the ****ttttt outa it since 75k miles for about 4 years now and its still going strong....this is a good street race weapon as it has won me alot of money in the past.....you can claim its a stock motor just with a shot on it if you wanna go the route i went with it....when someone disbelives tell um to bet money and you can pull it apart and prove them its a stock-yockeyy motor... for the serious buyer i can tell track times and trap speeds from the identical motor with various shots on it....

low low miles (60K) shortblock..... 350 standard bore roller cam 4 bolt main motor....

the shortblock only is for sale but i do have various other parts i can make a package deal with.....

go my route with a stock motor with spray or take it apart sell all the parts except the block and build yourself a killer 4 bolt main bored 355 out of this standard bore low miles block....

any more questions? i can throw in chrome moly pushrods, stamped steel rockers for heads... lifters included.... roller cam in there and ready to crank over after heads and intake are on it... i have other stuff that i can sell with it such as heads intake carb etc etc but that will be extra... lemme know whats good....

[Jared1970Chevelle]

theres been speculation on other racing sites such as SBP,the honda site,etc etc about the validity of the "Envious Motorsports Stage 6 Street Racing MOTOR KIT"..... for all of the pms and people wondering... this is a provennn motor combination / kit that has been in the works for over the past year and a half of relentless research and street/track data testing with F.A.S.T and EFI live systems ....It has been a winning proven combo by a well known street racing legend and can even be signed/etched in time with a dremel for a small extra fee....

flow sheets of heads/videos/dyno sheets/guidettes phone numbers/cam cards etc furnished upon request or purchase of EMS STAGE 6 kit....

[Jared1970Chevelle]

make offers.... open to trades... i need this stuff gone... its going on ebay and if dont sell here

[Slo86Bird]

motor scooter =)

[Jared1970Chevelle]

i told you 200 bucks and the scooter... come get it now...

[FAST Z]

trade ya 2 nitrous kits for 4150 flange intakes, a swift kick in the nutz;-) and whatever else you may be lookin for that's in my garage for those BB2X's......You know how to get in touch with the Birdman right........

[Jared1970Chevelle]

the heads go with the stabilizer bars... these bars fit only these heads... the stabilizer bars

the heads 380 at .700 lift flow sheets too... they are ported

2200 for the heads and s bars and ill throw in comp cam chrome moly race roller rockers for another 150.... lighter and strongger superior over aluminum ones,,,,

[FAST Z]

my point was I don't have 2300 for a set of heads.. i can hook you with 2 killer nitrous kits..both with full bottles and maybe some cash if you don't think of something you need that I have in my enormous inventory in my garage.... Tell Dontsleep to get in touch or you guys come down... I would love to clean out some stuff and put those on a shelf for if I build another bbc.... kind of a killer backup motor I am thinking....and my offer for the swift kick in the nutz still stands... then I can roll you down the hill and keep the heads...:-)

[Jared1970Chevelle]

hahaha i didnt know it was you birdbrain... its me easymoney if you didnt know... i need cash for these heads.... but what are these nitrous systems you speak of and how much cash with them??? make a list of the garage junk you got... ill be in touch

[the big kahuna]

you have any good cams for big blocks ?

[Jared1970Chevelle]

just whats listed sir.....

[Jared1970Chevelle]

b/o or tradeeeeee......

BUMPPPPP....

also got 245/50/zr16s rear tires for sale with a patch in each.....various slicks....mustang parts....popsicles...moonpies from georgia....and a ls1 heads and cam package to make 450whp on a stock motor.....