LT1 sale

[red97z]

I have all this stuff for sale, I have pics of everything, just ask me to post them or give me your email. PM me offers, I want this stuff gone, I'm selling off my car so I can get $ for an 02' Z06. Here's whats for sale:

LS1 Front Brake Upgrade for LT1-Direct bolt on for 93-97 Fbody or replacement 98-02. Includes calipers, rotors, hub, spindle, and upper control arm, the lines are cut so you'll need new front lines and you're set. $175

Low mileage LT1 waterpump, 2K miles on it, works great- $125

Black STB for 93-02 Fbody-$60

LT4 1.6RR's, self aligning 7/16" stud, full set, $120

Stock Lt1 oil pan-$30
Stock LT1 valve covers-$20

Stock 97' LT1 fuel rails, polished, look nice- $40

LT4 heads, assembled with LT4 springs, locks retainers. 7/16" studs -$575

Brand new in box MSD wires for 93-97 Fbody with used fire proof sleaves.-$90

Brand new dual 3" cutout pipes for exhaust. Aluminum- $75

Edelbrock 58MM TB for 93-97 Fbody-$200

LT1 fresh block from machine shop
-bored .030 over
-hot tank, oven cleaned
-new brass freeze plugs, cam bearings
-all new plugs
-line bore on main journals
$325 picked up

LT4 heavy duty timing chain -$100
LT4 hot cam-$150

stock LT1 pushrods-$25
stock LT1 lifters-$40
Stock LT1 dogbone lifter retainers-$25

LT1 vortech A trim supercharger kit, complete-$1700

Custom ground Bullet Cams LT1 blower cam-$210

Brand new MSD billet optispark for the 95-97 later year LT1, $450

ALL PRICES ARE AS LISTED, or OBO, PM ME OFFERS

-money talks!! first pay, first serve

my email is blackpixi7@hotmail.com

AIM-blackpixi7@hotmail.com
cell is 609-954-3238, please call after 4pm during weekdays, anytime during weekends. ask for Kyle, make reference to add.
thanks, pics are available of anything.

[red97z]

Rockers pending sale...

[Camvill]

LT4 heads, assembled with LT4 springs, locks retainers. 7/16" studs -$575

i might be interested lemme look at my situation

[red97z]

Heads are sold!

[red97z]

stb- sold!

[slasherbarb]

you still got the brake set up...very interestd...

[red97z]

Yes I have'm, I'd like to do a local deal on these as they're very heavy and dont' want to ship'm too! $175 picked up, not a dollar less !!8-)

[red97z]

Block is pending sale and so is the timing chain.

LT4 hotcam, stock lifters, valve covers, still for sale!

Also have all the stock LT1 A/C parts, and the LT1 radiator/fans from a 97 Z28.

Also have these new stock and used parts!

Brand new dual 3" exhaust cutouts! $75
http://i16.tinypic.com/6fi1a85.jpg

Stock Hurst white 6 speed ball $20
http://i12.tinypic.com/4xvfxcg.jpg

Stock GM brand new Shifter boot for 97-02 Dark Grey Interiors
no clip, just the boot. $30
http://i12.tinypic.com/6g0m2vs.jpg
http://i17.tinypic.com/6g4a99e.jpg


**Entire Redline Leather 3 Piece interior kit**
Shifter Boot, E brake boot, and armrest boot, all for 97-02 interiors
Graphite is the color of the leather, matching stitching
1" shorter on the shift boot so you can run a stock or short shifter
Brand New, High quality leather!

$100 shipped for all three!!
http://i18.tinypic.com/6cq5lc4.jpg
http://i11.tinypic.com/6fua9ma.jpg
http://i14.tinypic.com/6c7aovs.jpg

Am also parting out a 97 Z28 M6, color red, grey interior, let me know what you need

Also have a damaged 93-97 SS hood.

[red97z]

Here's a pic of the car for reference, I'm parting it out. M6 Z28.

http://i14.tinypic.com/4u0suqh.jpg
http://i11.tinypic.com/4pp0o08.jpg


The cage is a Kirk's and must be picked up and removed by the buyer, it's a bolt in.
http://i14.tinypic.com/54n3ts3.jpg

Also have a brand new GM nose emblem for 93-02 camaro's. $40
http://i18.tinypic.com/4lsdp34.jpg

[red97z]

Shifter ball Sold!!!

[red97z]

Some pics of the interior, let me know what you need:
http://i8.tinypic.com/67gx5j6.jpg
http://i2.tinypic.com/4t6ucds.jpg
http://i3.tinypic.com/6czu4g9.jpg
http://i10.tinypic.com/4q69c2w.jpg
http://i1.tinypic.com/6aeybmc.jpg
comp vacuum canister-$35 takes it, must have with big cams!!

[Blacdout96]

how much for the cage? and y are you parting that beautiful thing out? but intrested iun the cage

[Firebird67dude]

I need the shifter boot bracket thingy. Ill take the boot and bracket from the first pic above!!

[red97z]

I need the shifter boot bracket thingy. Ill take the boot and bracket from the first pic above!!

Paypal me $35 and it's yours!

blackpixi7@hotmail.com

[red97z]

how much for the cage? and y are you parting that beautiful thing out? but intrested iun the cage

The cage is $400, black, Kirk's model 93-02 fbodies. Must be removed by buyer or $450 for removal. Located in Trenton, NJ! Thanks! Kyle-

[TransAm619]

how much for the berger panel?

[JerzLT1]

how much for the rims? and is the full t56 set up available? hydrolics and everything? any pics of the blower kit?

[red97z]

how much for the berger panel?

The berger panel I'd take $80. It has a Moroso On/Off Volt switch drilled in and mounted on it though. It's required at the track if you relocate the batt.

[V]

what times will that cage certify to? is it techincally a 4 or 6 point? i cant see any door bars.

[red97z]

cage is a 6 point, certified to 8.99

[ar0ck]

I'm going to be interested in that block.

[SamhainZ28]

pm on the wheels

[slasherbarb]

do u still have the brake upgrade...

[red97z]

do u still have the brake upgrade...

brakes, wheels/tires, and block are all gone guys