Lt1 parts...

[Shrek]

Stock black valve covers...15

8 Stock Pistons with rods...15

Stock LT1 block with surface rust...100?

Stock Crank with surface rust...20

Stock oil pan...10

Stock Timing chain cover...15

Set of LT1 aluminum heads with heavy duty comp cams valve springs. There is a broken valve cover bolt in one of the heads that i can extract if needed...150? 200?

all of these parts were off of my 93 z28 wich my parents junked on me several years ago. I have a lot more stuff, that is still at my parents. This is what i have in NJ. I dont know what the going prices are on anything or even if this stuff is worth anything... all i know is that i need money badly...

I also have a front end kit from pst the kit is new, and most of the stuff is still in bags, in the original box. it has ball joints, tie rod ends, sway bar bushings etc. I'm not 100% sure everything is there, the box has been opened, and has moved 3 times since i bought it in 03.... 50

not LT1 related i have a holly 4 barrel carb, i know nothing about it, i know that it needs a rebuild...bad...20?

if you see anything you want, or want to take a look at, let me know please...

the car had just over 100,000 on the odometer and ran fine when taken apart

thanks...

Shrek

[JerzLT1]

how much for the heads and how many miles on the springs?

[Shrek]

The springs have less than 5k on them prolly more like 2k, i pulled the motor shortly after i got home from japan, wich was about 2 months after the new springs and cam went in...i honestly dont know what a good price is, the heads are in good shape except for the valve cover bolt as stated...i guess i'll research it and get back to you, or make me an offer...

Shrek

[WildBillyT]

I am intreseted in the carb. Can you get the numbers off of the choke horn?

[WildBillyT]

Oh, do you have a pic of the carb as well? For $20 I'll probably buy it anyway, but I'm just curious what it is.

[Shrek]

i'm trying to post pics, but they are all too big for some reason, any ideas?

[Knipps]

www.imageshack.us
www.photobucket.com

[Shrek]

here are some of the pick of the holley

[Shrek]

more of the carb, and one of the heads, i have more of both if any more are needed...thanks

[Mark B]

I will take the pan. Where are you located?

[Shrek]

Mine Hill in morris county...between dover and roxbury...

[WildBillyT]

Shrek, could you read the numbers on the choke horn?

[Mark B]

Can you get a shipping quote to ZIP 19020? Thanks

[Shrek]

Okay Bill, the numbers are 1850-2, i believe its an early 4160 600 cfm...and mark what do you need a quote for? so i know how heavy?

[WildBillyT]

Perfect. I have an 1850-2 600cfm carb that was, for lack of a better term, "converted" to mechanical secondaries and I need spare parts.

What will shipping to 08822 NJ be?

[Shrek]

well i'll check on that, for both of you, i didn't realize that you asked for the pan mark...

[FBODS4EVER]

you got a pm

[Shrek]

u got one back

[Shrek]

okay, the valve covers and heads are gone...still working out the rest of the stuff for the weight on shipping and what not on the other items...

[FBODS4EVER]

josh, ill let you know on the block. i didnt know you had it. i know someone who might be interested. what kind shape is it in?

[Shrek]

The block is overall in good shape...last time i had it out, i had it checked for cracks, honed, and prepped by a machine shop down in NC...the block along with all of the other stuff has been sitting for a while, and basically has a normal amount of rust on it...i can take some pics of it if you want and post them up on here...lemme know...

[FBODS4EVER]

sounds good send me some pics. thanx

[Mark B]

Any word on the oil pan shipping quote?

[Shrek]

The carb shipping will be about 7.55 shipping parcel post about 2 days...and the pan, about 5 bucks, for priority wich will arive in about 2 days... sorry this took so long, guys, i've been having difficulties with my life...lemme know if this is a go...i looked a little closer at the pan, there is some light rust ont he inside, nothing a little sand paper wont fix though, it has been sittinf for a long time...thanks

[WildBillyT]

Cool, thanks. Do you take Paypal?

[Shrek]

yeah i take paypal...i'll shoot you my e-mail address for payment...

[Mark B]

Send the paypal address to me too. You got a deal.

[Shrek]

okay here is a pic of the block, like i said, it has been sitting for a while, but it is cast iron, and strong...it is an lt1 block, with surface rust, it has been sitting for 3-4 years, it should clean up fine,

[Shrek]

hey bill i was wondering if you still wanted that carb? let me know so i can make other arrangements if i have too...thanks

Shrek

[WildBillyT]

hey bill i was wondering if you still wanted that carb? let me know so i can make other arrangements if i have too...thanks

Shrek

Yeah man I still want it. Paypal is taking forever and a day to transfer funds... Again.

[Shrek]

okay, its not a problem, i didn't know if you sent the payment, and maybe i sent you the wrong address or something like that...its all ready to go...

[WildBillyT]

Payment has been sent :mrgreen: