red97z
06-30-2007, 12:27 PM
Ok, I'm selling off the rest of my new/used stock and performance parts. This stuff is for LT1/LS1's. I'm in Trenton, NJ. If you have any questions or concerns, don't hesistate to email me, pm, or call my cell at 609-954-3238, ask for Kyle. Most of this stuff is brand new, or slightly used.
-Slightly used TBYRNE panhard rod. Red, mild steel, grease fittings on each end. Will fit 93-02 Fbody. $70
-Used LT4 hotcam. Great condition, cleaned up at machine shop recently. Has some pits in the cam lobes, but most come off with your fingernail. $150
-LT1 Block, recently serviced at machine shop. $200 bill at shop. Hot tanked, deck heighted, cam bearing removal, and freeze plug removal. Ready to be rebuilt and handle whatever you want to throw at it. $225 picked up.
-Two brand new aluminum 3" exhaust cutouts, with all hardware, and clamps. Pending
-Stock LT1 Crankshaft out of 97' Z28 with 60K on it, good shape -$50
Stock LT1 pistons/rods out of 97' Z28 with 60K on it, good shape-$80
-Slightly used LT4 heavy duty timing chain. $125
-Brand new GM Adjustable Belt Tensioner LT1 93-97. $40
-Two used rear one piece main seals for 93-97 LT1-$20 a piece
-LT1 accessory bracket off 97 Z28. $25
-Front LT1 timing chain cover, off a 97' Z28. $40
-Slightly used CompCams Vacuum Canister. A must for boost or large cam applications. $35
-Brand new 1 quart fabricated aluminum overflow tank. with hardware. $40
-Used LT1/LT4 EGR Blockoff plates. all three minus gaskets, thick aluminum SOLD
-Polished LT1 fuel rails off a 97' Z28. SOLD
-Brand new 2 1/16" Autometer ultra lite Fuel Level gauge. $25 with box
-Brand new 2 1/16" Autometer Ultra Lite A/F gauge, digital. $60 with box
-Brand new 5" indash Autometer Ultra Lite Tach. 10K. $110
I have pics of everything upon request. Please, serious offers only. No low ballin on anything!
I accept paypal - blackpixi7@hotmail.com
-Slightly used TBYRNE panhard rod. Red, mild steel, grease fittings on each end. Will fit 93-02 Fbody. $70
-Used LT4 hotcam. Great condition, cleaned up at machine shop recently. Has some pits in the cam lobes, but most come off with your fingernail. $150
-LT1 Block, recently serviced at machine shop. $200 bill at shop. Hot tanked, deck heighted, cam bearing removal, and freeze plug removal. Ready to be rebuilt and handle whatever you want to throw at it. $225 picked up.
-Two brand new aluminum 3" exhaust cutouts, with all hardware, and clamps. Pending
-Stock LT1 Crankshaft out of 97' Z28 with 60K on it, good shape -$50
Stock LT1 pistons/rods out of 97' Z28 with 60K on it, good shape-$80
-Slightly used LT4 heavy duty timing chain. $125
-Brand new GM Adjustable Belt Tensioner LT1 93-97. $40
-Two used rear one piece main seals for 93-97 LT1-$20 a piece
-LT1 accessory bracket off 97 Z28. $25
-Front LT1 timing chain cover, off a 97' Z28. $40
-Slightly used CompCams Vacuum Canister. A must for boost or large cam applications. $35
-Brand new 1 quart fabricated aluminum overflow tank. with hardware. $40
-Used LT1/LT4 EGR Blockoff plates. all three minus gaskets, thick aluminum SOLD
-Polished LT1 fuel rails off a 97' Z28. SOLD
-Brand new 2 1/16" Autometer ultra lite Fuel Level gauge. $25 with box
-Brand new 2 1/16" Autometer Ultra Lite A/F gauge, digital. $60 with box
-Brand new 5" indash Autometer Ultra Lite Tach. 10K. $110
I have pics of everything upon request. Please, serious offers only. No low ballin on anything!
I accept paypal - blackpixi7@hotmail.com