Exhaust vid of the V6

[DaSkinnyGuy]

Ok many people have been waiting for this. Me and 2 other friends put this vid together in a few hours. I will let vid do the explaing about the car. Vid was taking with a digital camera and came out amazing dont think there could have been much more of an improvement with a vid camera. Thanks goes out to redneckpimpin351 and a friend gary. Car has 107,000 miles in vid, is a 1992 Firebird V6 with a 1991 formula hood and 1991 formula front bumper. swapped out the stock taillights for the grid taillights.

http://www.youtube.com/watch?v=sWqjpkWhLMI

[maroman88]

sounds pretty good for a 6er lol, the stripes dont go well with that formula power bulge hood....

[DaSkinnyGuy]

yea but the rest of the body had the stripes already and i put the new hood and bumper on so i had to continue the stripes

[maroman88]

or the stripe delete method

[WayFast84]

im sorry dude but that doesnt please my ears

[DaSkinnyGuy]

buy me a V8 then if you feel the sound has ruined your ears

[WayFast84]

come pick my 305 up..

[deadtrend1]

come pick my 305 up..

no, he can get mine first!

I don't think the stripes look all that bad. Like I said before, I had the same look on my old 91.

[Mike]

im sorry dude but that doesnt please my ears

dont comment on someones engine unless you can let them listen to yours.

[BonzoHansen]

You need to make that hole in the hood functional.... :whistle:

[transmaro93]

it sounds better in person... i think thats as good as your gonna get for a v6 to be honest... its not bad at all... yo skinnyguy did your freind put on his slp yet i really wanna hear that....

[DaSkinnyGuy]

You need to make that hole in the hood functional.... :whistle:

It is functional in a way. it lets out hot air out the top of the hood. its really suppose to be there to use an intake on a 5.7L that would suck cool air coming over the hood

[DaSkinnyGuy]

it sounds better in person... i think thats as good as your gonna get for a v6 to be honest... its not bad at all... yo skinnyguy did your freind put on his slp yet i really wanna hear that....

Hes in the middle of moving so give him a month and it should be set up.

And i rather not have a 305 my goal is to drop an LS1 with a t-56k trans, and gmmg exhaust. but dont expect that for a few years.

[BonzoHansen]

It is functional in a way. it lets out hot air out the top of the hood. its really suppose to be there to use an intake on a 5.7L that would suck cool air coming over the hood

Oh I know how it works...I have one in a box. The :whistle: didn't convey that properly. LOL

[DaSkinnyGuy]

i guess i didnt pick up on that

[Teds89IROC]

memoriessss.. sounds like my 92 RS sounded lol

[bubba428]

sounds like my 3.4 only less lump idle(3.4 came from the factory with a more agressive cam) a little less rumble. But not bad at all really. throw in a set of 18lb injectors and she'll really pick up some low db.

[Mike]

my 3.4 did not have any lump to its idle, wtf are you talking about

[BonzoHansen]

my 3.4 did not have any lump to its idle, wtf are you talking about

Probably a plug laying down. LOL

[bubba428]

my 3.4 did not have any lump to its idle, wtf are you talking about

I put a 2.5in Flowmaster 80series and custom bent pipe on it along with a CAI and 19lb/hr injectors, then adjusted the TB to slow up the idle a bit, And put a piece of hard tube inside the vacuum line to restrict the air flow at the FPR. So she idled at about 700rpm and she had a bit of lump to it. thats why I told him to upgrade his injectors.

[Blacdout96]

yea but that also is more then likely the source of your bent rod problem, oyu were throwing in too much fuel, in a high mileage engine beating on it like it was stolen. dont do the injectors, leave as is personally my opinion

[Slo86Bird]

http://www.youtube.com/watch?v=AcT_ZyY3F0k&mode=related&search=

[bubba428]

yea but that also is more then likely the source of your bent rod problem, oyu were throwing in too much fuel, in a high mileage engine beating on it like it was stolen. dont do the injectors, leave as is personally my opinion

nah....blew the head gasket...i could see on the head a rust channel from the water leaking into the cylinder. But that didn't happen till some dumba$$ at the gas station filled it with regular not the premium i asked for

[DaSkinnyGuy]

Bored wanted to bring this out from the dead so those who didnt see it can now dont be afarid to comment and rate

[sweetbmxrider]

Hes in the middle of moving so give him a month and it should be set up.

And i rather not have a 305 my goal is to drop an LS1 with a t-56k trans, and gmmg exhaust. but dont expect that for a few years.

u got a link to that video? sound sweet though. i blew a hole in my 3.4L maro's muffler going to school one day and had a similar exhaust note!

[DaSkinnyGuy]

u got a link to that video? sound sweet though. i blew a hole in my 3.4L maro's muffler going to school one day and had a similar exhaust note!

Yes here he is

http://www.njfboa.org/forums/showthread.php?t=31321

[usp55]

Got a clip in my SIG below 94 3.4L V6- all stock except for Magnaflow muffler and high flow cat - Vid has 2.25 cut out

[Iroc-z86]

my jeep sounds better :) :lol:

jk man at least your f-body runs HA

[usp55]

hey man its all good! no need to edit, i dont take much personal - its only a 6cyl, but it does sound better in person as the microphone on my camera is no good and is a distorted sound clip. Actually put $20 in the tank yesterday and the guy who filled me up asked it if was a Z or an SS (the only credibility to his comment is the fact that his coworker owns a 95Z28 and he hears that everyday just about)

im not trying to pose as a v8, and I know its got no 'kahonas' – its just my daily driver that i enjoy playing with

What the deal with your F-body? - ah i just read your sig - gl with it

[Iroc-z86]

yeah i know of some good sounding v-6's, my cavalier with a flowmaster 40 sounded like a v-8 at times but its all good man.

Yeah the 350 that was worked developed a knock...so i took it off the road before i blew apart the 4bolt main block. needless to say whoever built the motor did a good job, never knew the hp tho or took it to the track. :( im hoping to at least break 16's with the 3-oh-slow. :lol:

[87GTA]

sounds nice when it's RPMs are up and it is idleing but anything after that you can tell it's a V6