which tires?

[transamkid]

i have a set of 15x10 rims with beadlocks that i got for 50 bucks. should i go with drag radials or slicks? i still have the stock 10 bolt but i am going to sturdy that up. and if i have exactly 30 inches in my wheel well width wise, can i go with a 29 inch tire, or should i stick with 28?

[WildBillyT]

Track only wheels or street as well?

Slicks are not D.O.T legal, nor are they safe for everyday driving.

[transamkid]

no only for the track, i have 2 sets of rims for the street im good there

[Batman]

Either way you can kiss the 10 bolt good-bye, so go for slicks!

[transamkid]

im aiming for a 9inch down the road, i found this link, and want to do some of the stuff there to my t/a
but back to the question, which kind of tires and what size?
http://web.camaross.com/forums/showthread.php?t=486663&highlight=you+be+the+judge

[Mike]

28x10.5 should be good

[Tru2Chevy]

Either way you can kiss the 10 bolt good-bye, so go for slicks!

He's got a 2nd gen, and an 8.5" ten bolt - not nearly as many worries as us 3rd and 4th gen guys have.

- Justin

[transamkid]

28x10.5 should be good

10.5W will fit in stock wheel wells? i have no tubs or anything special, just ladder bars and a set of edelbrock performer ias shocks+subframe connectors

[WildBillyT]

My 78Z had trouble fitting 28" tires, but the BS on the rims was about an inch too little.

[Batman]

He's got a 2nd gen, and an 8.5" ten bolt - not nearly as many worries as us 3rd and 4th gen guys have.

- Justin


Sorry, need to get new reading glasses..........

[Rich189]

all i hear is good things about MT dr's and et streets so id suggest them... i just picked up 315 bfg dr's for mine