View Full Version : paint?
WayFast84
07-24-2007, 07:09 PM
what should i ask for when I go to the paint shop for paint? Im doing this at home in my driveway. I have a gravity fed gun, and am not looking for the best job, but the best i can make it.
camaro2you
07-24-2007, 08:50 PM
i would go with single stage, what are you painting?
WayFast84
07-24-2007, 09:22 PM
engine bay
WayFast84
07-25-2007, 01:44 PM
i was thinking about using this http://www.duplicolor.com/products/paintshop.html
camaro2you
07-26-2007, 10:39 AM
Ya thats decent cheapo paint, i used it to paint my gocart came out pretty good. I dont know how their clear is though, i was to cheap to use it on the gocart.
WayFast84
07-26-2007, 07:46 PM
pics? its 20 bucks so 60 for the paint, clear and primer, Id be doing it in black.. But I want to do it silver so when I'm rich i can paint my car silver and have a matching engine bay?
what color did you use?
BonzoHansen
07-27-2007, 09:54 AM
You're better off with black. That silver won't match what you paint your car unless you paint the whole car that color. The black would be better then mismatched silver.
camaro2you
07-27-2007, 10:36 AM
I used that blue color.
Untamed
07-27-2007, 11:12 AM
Definately want to see the results when you are done Wayfast. Might be a good answer for my nearly nonexistant budget.
Do you have a high res camera? Black is such a pain in the *** to get right.
GP99GT
07-27-2007, 08:57 PM
rattle can and very light coats...go at it
IROCZman15
07-29-2007, 09:28 PM
i did mine with 3 rattle cans,a nd it came out awesome
check out pics on my website...
WayFast84
07-30-2007, 02:12 PM
I tried rattle coat, It looked ok, But I wanted a little better results, Im going to order the duplicolor paint system with black and hope it looks better.
bubba428
07-30-2007, 06:57 PM
Why did you order it....advance auto has it in stock.....
WayFast84
07-30-2007, 09:02 PM
i didnt, I can order it advance and pick it up..
WayFast84
07-31-2007, 06:46 PM
just picked up that paint it was 62 bucks total, Im hoping Ill have the primer sprayed tonight. Lots of masking to do!
Untamed
08-01-2007, 10:50 AM
Matt you're just doing the engine bay for now right? Any body panels you can practice on afterward to see what the paint looks like on the outside?
WayFast84
08-01-2007, 03:14 PM
ill do have of a fender I have, If I have enough extra maybe ill do the whole thing, the problem is it needs to be buffed out, and I wont have the machine to do that..
WildBillyT
08-01-2007, 03:49 PM
Are you going to build an outdoor spray booth?
BonzoHansen
08-01-2007, 11:50 PM
just picked up that paint it was 62 bucks total, Im hoping Ill have the primer sprayed tonight. Lots of masking to do!
I'm no expert, but it is pretty humid out....
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.