Somerville on Friday?

[BonzoHansen]

Maybe?

[WildBillyT]

Very strong possibility. I will be there if I don't go down the shore.

[AliWantsNss]

Ill be at a Phillies game.

[mtnhopper1]

I just got my install kit from Bowtie Overdrives for the 2004R, so I'll be laying on cardboard.

I'm about 2 weekends away from roadworthy!

Maybe next time.

[Untamed]

I think Bob goes every Friday.

I pass through there on my way home so could stop by for a few mins.

[PolarBear]

Going camping and then rafting on Saturday. My cousin would be really mad if I went the ONE time he cant go, damn you Scott and your ill timing..... :lol:

[BonzoHansen]

OK, plan change. I'm out. I finished painting my kid's room, then put the Z back together (it was aprt for the dent guy) & took it for a ride. Damn thing sounded like something was rattling off. It seems the pinhole in the RH muffler grew a whole bunch, into a series of much larger holes. It was getting louder as I drove. So it is shelved until I can figure out plan B. I'm gonna see if I can throw some crappy muffler wrap stuff on it for the time being. Total rig!

Nuts, I thought I'd be able to finish cruise season. Now I may be out until spring.

[PolarBear]

OK, plan change. I'm out. I finished painting my kid's room, then put the Z back together (it was aprt for the dent guy) & took it for a ride. Damn thing sounded like something was rattling off. It seems the pinhole in the RH muffler grew a whole bunch, into a series of much larger holes. It was getting louder as I drove. So it is shelved until I can figure out plan B. I'm gonna see if I can throw some crappy muffler wrap stuff on it for the time being. Total rig!

Nuts, I thought I'd be able to finish cruise season. Now I may be out until spring.

Ahh I can fix that for you if you have some sheet laying around.

[BonzoHansen]

Bed sheet? Sheet cake? Piece of sheet? LOL

[PolarBear]

I was picturing some high temp thermoplastic sheet, or paper what ever you have lying around

[BonzoHansen]

I got some 5 mil plastic I use for a drop cloth.

[PolarBear]

Once that melts and rehardens it should fix any size holes you may have

[mtnhopper1]

I have a pair of glass packs you can have. No sneaking up on anyone with those, though.

[BonzoHansen]

I'm going to see what I can do with it tonight. Dammit. Advance has some dynomax super turbos on the shelf that might work in a pinch. Or maybe some duct tape.

[bad64chevelle]

or just straight pipe where the mufflers used to be.

[bad64chevelle]

Or turndowns off the pipe.

[Ian]

jon, none of that loud stuff is gonna work. scott is too old for loud cars :lol:

[BonzoHansen]

When you have a running f-body, get back to me. LOL

[bad64chevelle]

When you have a running f-body, get back to me. LOL

Oh I'm sorry, I forgot I'm not cool enough to hang out with you! Do those 2nd gen Fbodies have a big enough trunk to fit your walker into, or do you just lay the cane in the back seat? :moon:

[BonzoHansen]

Oh I'm sorry, I forgot I'm not cool enough to hang out with you! Do those 2nd gen Fbodies have a big enough trunk to fit your walker into, or do you just lay the cane in the back seat?

Oh yes, I can put a lot of walkers back there. One for me, Jeff, John & Tim. And chairs. :lol:

[bad64chevelle]

Oh yes, I can put a lot of walkers back there. One for me, Jeff, John & Tim. And chairs. :lol:

:lol: oh god I can see you four now...you know those ones who do all the car shows together, youre gonna be the new age KMart guys.

[JL8Jeff]

I think I have a spare 2-1/2" super turbo muffler sitting in the shed. I used it for less than a year so it should be in good condition. It's in the shed right next to my

http://www.scootamart.com/images/used/optimized/electric-mobility-rascal-large.jpg


-

[BonzoHansen]

:lol: oh god I can see you four now...you know those ones who do all the car shows together, youre gonna be the new age KMart guys.

Add Billy K to the mix too. LOL. You'll be right there with us, you young whipper snapper. Who else you gonna hang with, the guys from the north? :moon:






Exhaust is DOA. I thought the tailpipes wre clamped to the muffler, but just the hanger is. Both mufflers are split open. And show signs of contact. LOL.

Anyone know if Mufflex is open on Saturdays?

[BonzoHansen]

I think I have a spare 2-1/2" super turbo muffler sitting in the shed. I used it for less than a year so it should be in good condition. It's in the shed right next to my

http://www.scootamart.com/images/used/optimized/electric-mobility-rascal-large.jpg


-Is that a numbers matching basket?

[BonzoHansen]

In the weeds, LOL
http://img.photobucket.com/albums/v359/SIBLY/My77Z28/IMG_3122.jpg

See those stupid mufflers? :lol:



Mufflex wants ~$750. I figure getting a Pypes setup is about $400 plus either labor or lots of time under the car. 2.5" with x-pipe. Damn it, not ready for decision making.

[JL8Jeff]

I got a pair of the Pypes headpipes, Summit turbo mufflers and some Ebay tailpipes for the 70 for under $250 and that's all 3" stuff. You could probably put something together for closer to $200 if you shop around and watch Ebay.

[Ian]

When you have a running f-body, get back to me. LOL

some of us dont make enough money to fast-track our projects :(

Mufflex wants ~$750. I figure getting a Pypes setup is about $400 plus either labor or lots of time under the car. 2.5" with x-pipe. Damn it, not ready for decision making.

just have mufflex do it and be done with it. by the way, what mufflers are you gonna run? if you're undecided I'd say take a look at spintech.

[BonzoHansen]

Mufflex says he has magnaflows and flowmasters on the shelf - I'd go MF of those 2. But I might go Dynomax Ultra Flows. Or if I use Pypes, race pros.

Stop spending my money! LOL I got another car to build.

[Ian]

yeah out of those choices, I opt for the magnaflows too.