Because it is funny...

[12secondv6]

http://www.fullthrottlev6.com/forums/showthread.php?t=34005

[WayFast84]

Im not reading the whole thread, but on tgo the guy said he pulled them with a 1.7 60 ft.

http://www.thirdgen.org/techboard/organized-drag-racing-autocross/437823-new-suspension-may-have.html

Edit, thanks to BIGal I didnt buy a motor from this guy!

[GP99GT]

james BARELY pulled a wheel with his 97 bird...with a hell of a lot more work than that POS. i dont buy it

the rest of that thread made me feel like i was watching the special olympics

[ar0ck]

Its only a matter of time until he is run off that board as well.

[NJSPEEDER]

i had to throw my $.02 in there. no video yet and he posted that it would be up "tomorrow" on teh 24th. lol. what a smacker

[j0n]

1.7x pulling a tire my ***

[Mike]

1.7x pulling a tire my ***

i do

[12secondv6]

james BARELY pulled a wheel with his 97 bird...with a hell of a lot more work than that POS. i dont buy it


Exactly! I have a HUGE amount of work and MAJOR weight redux on the nose of the car.

It was built for 60 ft and 1/8th mile :)

I just thought it should be posted here also.

[Tru2Chevy]

This is a pic of his car on 8/25 at etown:

http://www.davemilcarek.com/082507e/images/8-25%201B%20101.jpg

Look at the 10" of daylight under those fronts!!!!!!

- Justin

[GP99GT]

baaahahahhahahhaha

[bubba428]

he didn't even get 10" of strut decompression :rofl:

[Ian]

the front suspension doesnt even look like it was fully unloaded :rofl:

[bubba428]

theres was too much bs weighing it down. Honestly I think he needs to STFU. Because of him every one (around here at least) thinks the 60* V6 ain't worth the sludge on the lifters. But if you do it right theres plenty of power in there, and now he's playing with a 3.4 and I'm gonna have to work that much harder just to rectify all the bad mojo he's making towards theses cars...

[Ian]

theres was too much bs weighing it down. Honestly I think he needs to STFU. Because of him every one (around here at least) thinks the 60* V6 ain't worth the sludge on the lifters. But if you do it right theres plenty of power in there, and now he's playing with a 3.4 and I'm gonna have to work that much harder just to rectify all the bad mojo he's making towards theses cars...

intelligent people realize that 60* motors can make power. hell, with enough work, any motor can make decent power.

[DaSkinnyGuy]

Ok guys heres the scope this guy is on thirdgen.org. He is a big poster in the V6 part of the boards. This is not even his car, its his girlfriends and for the longest time he has been having trouble dealing with her to get the car upgraded. When he was a e-town 8-25-07 i believe it was each time he tried to make a pass something went wrong with the car i think the fartest he got was a 100ft from the starting line. He is a big BS'er. If it was his car and he had someone who understood how to hook the car up to run good with a tune for the turbo the car has potential but if i am correct the fastest he has ran was like high 17's low 18's and there is a video of this that he has had deleted off the web. because his car did so bad he took someone else's time slip of the 12 second range. posted it up so people who believe that his name daves12secV6 was not a lie which it is. Well I just did this quick from what i have been reading from this guy but this is sad how much a a BS person he has become on several F-body forums.

[jims69camaro]

that's not funny, that's pathetic. 2 weeks and 10 pages of posts and still no video. ban him.

[bubba428]

I hate him...somebody needs to take his internet away

[ar0ck]

intelligent people realize that 60* motors can make power. hell, with enough work, any motor can make decent power.

With the right amount of money anyone can do anything.

[Tru2Chevy]

Ok guys heres the scope this guy is on thirdgen.org. He is a big poster in the V6 part of the boards. This is not even his car, its his girlfriends and for the longest time he has been having trouble dealing with her to get the car upgraded. When he was a e-town 8-25-07 i believe it was each time he tried to make a pass something went wrong with the car i think the fartest he got was a 100ft from the starting line. He is a big BS'er. If it was his car and he had someone who understood how to hook the car up to run good with a tune for the turbo the car has potential but if i am correct the fastest he has ran was like high 17's low 18's and there is a video of this that he has had deleted off the web. because his car did so bad he took someone else's time slip of the 12 second range. posted it up so people who believe that his name daves12secV6 was not a lie which it is. Well I just did this quick from what i have been reading from this guy but this is sad how much a a BS person he has become on several F-body forums.

We know all about him....he's a member here too, he just never posts here anymore because no one believed the crap he talked. His username here is lethalrides2k3. Look up some of his old stuff, and you'll see why he doesn't post here anymore.....

- Justin

[ar0ck]

And the lies still keep rolling excuse after excuse.

[Savage_Messiah]

I'd like to recognize myself for being the first reply and calling BS

[jims69camaro]

well, i've gone and done it now. enjoy:
http://www.thirdgen.org/techboard/organized-drag-racing-autocross/437823-new-suspension-may-have.html?posted=1#post3454839

[Savage_Messiah]

well, i've gone and done it now. enjoy:
http://www.thirdgen.org/techboard/organized-drag-racing-autocross/437823-new-suspension-may-have.html?posted=1#post3454839


:rofl:

[SamhainZ28]

haha i remember that guy, i still have yet to see him around town, but if i do, i'll make sure to see if he can pull those sick 10" wheels lifts :rofl:

[DaSkinnyGuy]

well, i've gone and done it now. enjoy:
http://www.thirdgen.org/techboard/organized-drag-racing-autocross/437823-new-suspension-may-have.html?posted=1#post3454839

Wow this is awsome now you wont see him post on that thread again

[jims69camaro]

Wow this is awsome now you wont see him post on that thread again

i'll just follow him around from board to board... asking the same questions.

[DaSkinnyGuy]

i'll just follow him around from board to board... asking the same questions.

Just keep your self in reason so we dont loose 2 members in stead of just one.

[WayFast84]

Its closed :( i really want to know why he wanted to make me a mismatched motor for $1800 using used parts

[bubba428]

Its closed :( i really want to know why he wanted to make me a mismatched motor for $1800 using used parts

because he's such a tool he makes you look like a nascar engine builder

[misterjuice]

his car will tear my SRT4 a new one......

[jims69camaro]

ah, they closed the TGO thread, too. before he could answer. dammit. make sure you keep an eye out for him and let me know where he pops up next so i can get those questions cleared up - for my own edification, you understand. it's just that i can't stand inconsistencies, so i must ask questions...

p.s. i never called him anything, i was never mean to him, i just asked a series of questions. that doesn't go against any forum rules that i've ever seen. :shrug:

[kristen]

oh yeah well i can pull 3 tires and i got down the 1/4 mile the whole way like that!

[jims69camaro]

vid or :bs:

[bubba428]

sarcasm fool...but if he has a video...she might not be joking

[Mike]

sarcasm fool...but if he has a video...she might not be joking

calling him a fool when u missed the fact both kristen and jim were joking

[bubba428]

no...i was still joking...kinda like how this WHOLE tread got started...a sarcastic tool started running his mouth....he just hasn't been able to google any blue 3rd gens doing wheelstands

[Frosty]

because he's such a tool he makes you look like a nascar engine builder

If that's not the pot calling the kettle black...

[Mike]

hahahhaha i couldnt find one on google either......

i bet i can find pics of a pewter stock internal ls1 going wheels up on a 1.6xx short time

[Kat]

Damn I guess my old car when it was pulling 1.8's in da 60 on street tires was lifting the front only 5" :( I ain't got **** on that guy :(

[Mike]

If that's not the pot calling the kettle black...

its still the funniest thing all day

[bubba428]

the difference is I'm going to have a car that WILL perform the way i said it will and If it don't I'm not gonna cry like little biotch and leave. I'll fix it and post the vid from the get go

[Frosty]

Damn I guess my old car when it was pulling 1.8's in da 60 on street tires was lifting the front only 5" :( I ain't got **** on that guy :(

5''? No wonder you're single...

[Frosty]

Nevermind

[Kat]

5''? No wonder you're single...

YA RLY!

Maybe the new car will pull 1.6's on DR's and I can get the full 8" and the Koni reds set to #3....

[jims69camaro]

5''? No wonder you're single...

:rofl: :rofl: :rofl:

[jims69camaro]

no...i was still joking...kinda like how this WHOLE tread got started...a sarcastic tool started running his mouth....he just hasn't been able to google any blue 3rd gens doing wheelstands

actually, it got started exactly this way:

oh yeah well i can pull 3 tires and i got down the 1/4 mile the whole way like that!

vid or :bs:



which is why when kristen posted such a ridiculous brag, i just had to revisit the original... on FTV6, that is.

went something like this:

WOOT i can get daylight under the tires

tried out new front springs today launching @ 10 psi and i can get the fronts off the ground like 10 or so inches .
cant wait to get the car to the track saturday and try launching @ 18+ psi
ill see if i can get some video of it posted up tom if not ill deff have video saturday night

o rly? video or :bs:

kasey, as usual, was right on top of things.

[Mike]

kasey is usually under things,unless he has a ladder but other than that you are correct

[Frosty]

kasey is usually under things,unless he has a ladder but other than that you are correct

I'm reporting this post :lol:

[Mike]

darn, im sorry frosted flakes

[Frosty]

:D:D

[Mike]

your grrrrrrrrrrrrrrrrrreat

[Frosty]

:blushes: You like me, you really like me.

...and it's "you're" you tool. :D

[Mike]

for that im switching to mini-wheats.

[kristen]

wow this was blown out of the water. why get heated?

[Mike]

whos hot?

[Frosty]

I'm hot, I didn't turn the AC on today.

[Savage_Messiah]

kasey, as usual, was right on top of things.


That's what she said.






:lol:

[bubba428]

don't you mean thats what he said :lol: