I R Happy Boy

[trashman01]

just found a set of 400 pistons, .030 over, 10.1:1 compression for the 5.565 rods and they are by Keith Black(had very good luck with these when i was working for Big Als Toybox):w00t: and the best part, they are 60$ cheaper then the ones i found on Jugs/Skummit(they were 10.9:1 for a 5.7 rod, 296$) :lol: i r very happy. oh and i found out that the motor has brand new main bearings and seal. but i gotta get the crank repolished as my garage flooded out and it now has surface rust on it:evil: hmmm 406 SBC chevy with 10:1 shortblock:drool: now gotta figure out what vehicle i wanna do, thinkin either 60/70s 2wd GMC/Chevy pickup(RC/SB), a third gen bird/maro, or a late 60s/early 70s chevelle/nova. hmm i need more money

[Tru2Chevy]

Why would you wanna stick with the 5.565 rods? I wish I had the money to jump to a 5.7 or 6.0 rod in mine.....

- Justin

[unstable bob gable]

You worked for BIG AL's toybox? BIG AL built the engine in this punk's AMX:

http://i19.photobucket.com/albums/b175/Rebel25A/BlownHumpster.jpg

[Slo86Bird]

trashman, i see hooked on fonix dun good fer yooh two.

[transamkid]

trashman, i see hooked on fonix dun good fer yooh two.

in his case, hooked on ebonics

:lol:

[trashman01]

You worked for BIG AL's toybox? BIG AL built the engine in this punk's AMX:

http://i19.photobucket.com/albums/b175/Rebel25A/BlownHumpster.jpg
yea i remember that guy callin up and asking for a catalog way back when al was working outta his house, al is a str8 up guy, should call him and get a bigger motor in ur amx
trashman, i see hooked on fonix dun good fer yooh two.
i failed that ****:lol:

Why would you wanna stick with the 5.565 rods? I wish I had the money to jump to a 5.7 or 6.0 rod in mine.....

- Justin

its a budget build otherwise i would. im usuing the stock 76CC heads also

[Tru2Chevy]

its a budget build otherwise i would. im usuing the stock 76CC heads also

Ahh, gotcha. Well, good luck with it. What cam are you going with?

- Justin

[Slo86Bird]

eye failed it two so dun feel bad.

[trashman01]

Ahh, gotcha. Well, good luck with it. What cam are you going with?

- Justin
dont kno it, prob gonna call up and have them match it to my heads, i kno i need the small basecircle, i want something in the mid 500 for lift

eye failed it two so dun feel bad.
feal bad! nou eye dun feal bad

[PolarBear]

You worked for BIG AL's toybox?

You guys talking about Al Tischler?

[Slo86Bird]

eyez tall kin bout hooked on fonix end how it dun good fer mee.

[jims69camaro]

just found a set of 400 pistons, .030 over, 10.1:1 compression for the 5.565 rods and they are by Keith Black

we have a small group of us that're about to show those 305 boys what's what. justin has a 400, you're building one and i might get mine done over the winter. be real interesting to compare notes after the build, say at a dyno day or something. mine's definitely going in the '87.

hmmm i need more money

yeah, which of us doesn't...

[trashman01]

we have a small group of us that're about to show those 305 boys what's what. justin has a 400, you're building one and i might get mine done over the winter. be real interesting to compare notes after the build, say at a dyno day or something. mine's definitely going in the '87.

well as long as they can set it up to engine dyno it it be ok:lol: im only shooting for 400hp nothing crazy, atho when money comes more avaible(changed my trash route today) i wanna drop a set of AFRs on there and prob go with the 6" rods. but thats after i get a car/truck.

[trashman01]

You guys talking about Al Tischler?

no different al, this is Al Lambaro(sp?) hes from my home town and been building motors sicne like 1983. last i knew he had a 427 stage 2 in his chevelle:twisted:

[Tru2Chevy]

we have a small group of us that're about to show those 305 boys what's what. justin has a 400, you're building one and i might get mine done over the winter. be real interesting to compare notes after the build, say at a dyno day or something. mine's definitely going in the '87.

Yea, you and I will both have 400's in 87 Camaros, Wayfast will have a 400 in his 84 bird....that means that trashman has to get a 3rd gen to keep the trend going :)

Best guesses for my motor (also quite a budget build) are 360 hp and 450 tq. Should be enough to keep me happy for a little while :)

- Justin

[trashman01]

Yea, you and I will both have 400's in 87 Camaros, Wayfast will have a 400 in his 84 bird....that means that trashman has to get a 3rd gen to keep the trend going :)

Best guesses for my motor (also quite a budget build) are 360 hp and 450 tq. Should be enough to keep me happy for a little while :)

- Justin
looks like ill have to get a bird that way its two pairs:rofl: im thinkin bout third gens again just CT sucks when it comes to the dyno emssions:evil: and trying to find a clean roller that was a stick car

edit, now i really wish i didnt sell my 83, that was the perfect car, non a/c, manual windows/locks, 5spd set-up and a hard. god i miss that car