Which muffler?

[89CamaroRS]

Got a choice of Flowmaster, Spintech or Magnaflow. Had twin flowmaster 40 series on the vette with the same motor and loved it, but i've never dealt with crossflow mufflers. Will follow LO5 350 w/edlebrock alum heads, Comp Cams Extreme Energy 274 cam, edlebrock shorties and twin cat y-pipe, 3" all the way back. Want to stay with dual tips so crossflow design is a must. Mufflex will install. What do you guys think?

-anyone have sound clips they'd like to share?

thx guys.

[maroman88]

on my Z28 i have a 350 with the factory dual cats, into a custom y-pipe into a 3in pipe into a flowmaster muffler with a single outlet. its plenty loud for my daily driver and has a nice low rumble

[WildBillyT]

Magnaflow. Flowmaster mufflers are not known for being great performance-wise, and their crossflow ones are the worst of their performers (IIRC).

The results in HP order:
1.Flowtech Warlock (open) 374.2 hp/ 333.1 tq
2.Bassani Real Street 373.7 hp/ 333.8 tq
3.Hooker Maxflow 373.5 hp/ 333 tq
4.Borla XS 373.3 hp/ 332.6 tq
5.Magnaflow 372.8 / 332.5 tq
6.MAC 372.3 hp / 331.5 tq
7.Flowtech Afterburner 372.3 hp/ 330.1 tq
8.Hooker Aerochamber 372.1 hp/ 330.4 tq
9.Bassani 372 hp/ 333.5 tq
10.Spintech 371.6 hp/ 332.2 tq
11.Edelbrock Performer RPM 370.9 hp / 331.3 tq
12.Borla XR1 370 hp/ 334 tq
13.Flowtech Terminator 369.5 hp / 331.3 tq
14.Dynomax Ultra Flo 369.4 / 333.2 tq
15.Flowmaster 369.4 hp / 331.8 tq
16.Flowtech Warlock 366.3 hp / 325.3 tq
17.No muffs 365.2 hp / 330.1 tq

Sound Off in Quietest to Loudest (Decibels):

1.Borla XS, 80db at idle, 90db at 2,000 rpm, 110db at WOT.
2.Hooker Maxflow, 80db at idle, 90db at 2,000 rpm, 120db at WOT.
3.Magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at WOT.
4.Flowmaster, 82db at idle, 93 at 2,000 rpm, 115db at WOT.
5.Flowtech Warlock, 83db at idle, 92 at 2,000 rpm, 112db at WOT.
6.Dynomax UltraFlo, 83db at idle, 94 at 2,000 rpm, 113db at WOT.
7.Borla XR1, 83db at idle, 96db at 2,000 rpm, 118db at WOT.
8.Bassani Street, 83db at idle, 96db at 2,000 rpm, 120db at WOT.
9.Edelbrock RPM, 84db at idle, 93db at 2,000 rpm, 118db at WOT.
10.Bassani Real Street, 84db at idle, 96db at 2,000 rpm, MAX. (120+db).
11.Flowtech Afterburner, 86db at idle, 94db at 2,000 rpm, 115db at WOT.
12.Flowtech Terminator, 86db at idle, 94db at 2,000 rpm, 119db at WOT.
13.Hooker Aerochamber, 87db at idle, 94db at 2,000 rpm, 114db at WOT.
14.SpinTech, 87db at idle, 97db at 2,000 rpm, 116db at WOT.
15.MAC, 87db at idle, 98db at 2,000 rpm, 119db at WOT.
16.No Muffler, 91db at idle, 103db at 2,000 rpm, MAX. (120+db).

[nj96z28]

go magnaflow

[89CamaroRS]

Magnaflow seems to be the favorite, does anyone have anything against Spintech? I really liked the exhaust note from the few clips i could find online. Can't argue with the HP numbers though...(thx billy)

[Tru2Chevy]

I'd go with either Magnaflow or Spintech.....both sound good.

- Justin

[1_BAD_NBM_SS]

i had the hooker on my 3rd gen... it sounded nice!

[IROCdan330]

brand spankin new hooker cat-back for sale in classifieds...on the cheap!

i currently have the same setup on my car and i love it.

[DaSkinnyGuy]

Spintech. http://youtube.com/watch?v=ARzgXu08iQs

[naSSty99ss]

I'd go for an eletric cut out, with stock cat back.

[Tru2Chevy]

I'd go for an eletric cut out, with stock cat back.

His stock cat back is 2 1/4 crimp bent......3rd gen 2.8L = not good for a healthy 350 to breath through.....

- Justin

[89CamaroRS]

Spintech. http://youtube.com/watch?v=ARzgXu08iQs

that sounds amazing. wish i had an ls1 though, lol. I'm thinking for overall exhaust note, Spintech's got it.


His stock cat back is 2 1/4 crimp bent......3rd gen 2.8L = not good for a healthy 350 to breath through.....

- Justin

I couldn't bear to put a stock catback on this car. I ended up cutting off a fairly new stock 2.8L system when i started the conversion. But hey nasty, if ya need a back up muffler or cat, i got a pretty news one sittin in a scrap heap right now bro. (didn't cut them, lol)

[maroman88]

i have the 3" hooker cat back on my 88 with headman headers and a magnaflow high flow cat, sounds awesome

[Tru2Chevy]

He's getting a 4" Mufflex catback with a Spintech muffler installed next week :)

- Justin

[Ian]

a 4 inch system!?!?! is his motor really that mean?

[Predator86]

u should try out the new flowmaster super 44 series muffler...looks pretty mean and im thinkin bought gettin it myself

[Tru2Chevy]

a 4 inch system!?!?! is his motor really that mean?

It's not that insane, but he figured he'd get it done once now and be good. It's a 350 with Performer RPM heads and the same cam I have (.490/.490 230/236 110 LSA ground +4 degrees).

- Justin

[Ian]

unless he plans on really stepping up his game, that sounds like too much exhaust to me. but, what do I know? :lol:

[Tru2Chevy]

Eh.....let it breathe. He's still got puny headers/y-pipe on it (Edelbrock TES dual cat setup).

- Justin

[bobb1589]

my friend has a nice system put in by mufflex. he had a spintech muffler sounds awesome

[89CamaroRS]

a 4 inch system!?!?! is his motor really that mean?

It's not that mean right now, but i'm not done with it yet. It is probably a bit more than i need now, but justin's right; wanted to get it done once, and properly. Now, no matter what i do to the motor i'll never have to mess with the exhaust system again.


my friend has a nice system put in by mufflex. he had a spintech muffler sounds awesome

I'm loving it. I used to be an exclusively flowmaster guy, but Spintech's exhaust note converted me.

[Tru2Chevy]

Now, no matter what i do to the motor i'll never have to mess with the exhaust system again.

Well, you do need a nice set of LTs when you can afford it......

- Justin

[89CamaroRS]

Well, you do need a nice set of LTs when you can afford it......

- Justin

yeah, no ****. Those edlebrocks u sold me were so rusty that mufflex said they couldn't take the air tubes off cuz their welder would've punched holes instead of closing them. That of course means my centerbolt looms dont fit, which means my sparkplugs wires dont fit. I have a plan for them tomorrow, but for the moment....YOU BASTURD!!! lol.

[Tru2Chevy]

yeah, no ****. Those edlebrocks u sold me were so rusty that mufflex said they couldn't take the air tubes off cuz their welder would've punched holes instead of closing them. That of course means my centerbolt looms dont fit, which means my sparkplugs wires dont fit. I have a plan for them tomorrow, but for the moment....YOU BASTURD!!! lol.

Hey, I never made any promises.....you got them dirt cheap, and they are way better than the POS setup you had on the 'vette. :razz:

- Justin

[89CamaroRS]

Hey, I never made any promises.....you got them dirt cheap, and they are way better than the POS setup you had on the 'vette. :razz:

- Justin

bah.....doesn't happen often but when ur right, ur right. i'm gonna make'em work tomorrow anyway. it'll be ugly, but i think it'll work. dremel the tubes off leaving about a 1/4 of the tube, sand off the rust inside and out and plug the small holes with similiar sized bolts and exhaust system crack sealer. <--found some real good stuff that is tough as hell. figure that'll hold till i can afford LT's, shouldn't be long.

[Featherburner]

Wil, I heard you pulling away from your driveway last night. The car sounds really good.:cool:

[DaSkinnyGuy]

Good to hear you liked that Spintech

[89CamaroRS]

Wil, I heard you pulling away from your driveway last night. The car sounds really good.:cool:

Thx man. Still needs a bunch of work but at least it moves, lol.


Good to hear you liked that Spintech

Yeah man, the tone is great. Now i just gotta get it runnin right (damn stoneage quadrajunk) to really appreciate it.

[Tru2Chevy]

Yeah man, the tone is great. Now i just gotta get it runnin right (damn stoneage quadrajunk) to really appreciate it.

.....how much do you have saved for that Demon? :)

- Justin

[89CamaroRS]

.....how much do you have saved for that Demon? :)

- Justin

bout $400. btw, ur air cleaner doesn't touch the inside of my stock hood at all so u should be good unless u have a taller intake.

[Tru2Chevy]

btw, ur air cleaner doesn't touch the inside of my stock hood at all so u should be good unless u have a taller intake.

Have you smoked yourself retarded? The intake on my car was your intake....you helped me put it on.

Now if only that Holley Street Dominator wasn't cracked..... :twisted:

- Justin

[89CamaroRS]

Have you smoked yourself retarded? The intake on my car was your intake....you helped me put it on.

Now if only that Holley Street Dominator wasn't cracked..... :twisted:

- Justin

didn't realize u were still going with that, thought u said u had picked up tim's RPM. that's good though, ur air cleaner will clear the stock hood. i'm still gonna get that cervini's pin-on though and run the 3 inch Green filter.