12secondv6
11-01-2007, 09:18 PM
1) 10 lb NOS nitrous oxide bottles.
I am looking for $150
2) Weld drag lite 15 X3.5 wheels with brand new Moroso DS2 26 X 4.5 X 15 front runner tires mounted and balenced.
The weld drag lites need a serious polishing and I have had them for several years. They suffer from years of oxidation. There have some minor scratched on them around where the lug nuts enter.
The moroso DS2's (lightest front runner drag tire in the market) are virtually brand new and have maybe 3-5 passes on them and less than 200 miles.
I will include the lug nuts and 5/16th spacers
The tires brand new are each $119
The wheels brand new are each $100
I am looking for $300 total SOLD!!!!
3) BF Goodrich Drag radials 255 50 16's mounted on camaro 16 X 8 salad shooter wheels.
The wheels are the lightest of the oem f body wheels. The drag radials have zero tred on them but decent life left in them. If you are familiar with drag radials then you know bf goodrich drag radials get better and better regarding traction when there is less and less tread. Mounted and balenced.
I am looking for $100 for the 2 wheels and tires
4) Mickey thompson "et streets" 26 X 10.5 X 16 mounted on 16 X 8 salad shooter camaro wheels
The et streets have a maximum of 20 passes.... most... if not all... were N/A so the burn outs were small
The tires go for $160 each
Again, wheels are salad shooters so they are the lightest oem wheel.
I'm looking for $250
5) SLP cold air kit for 3.8 v6 f body - it is just the metal intake tubing - no air filters. Make an offer
6) 3:23 gears for 3 series carrier - PENDING
7) rubber elbow for cold air kit - SOLD
Cash is nice but I would prefer LT1 performance parts such as:
cold air kit
sub frame connectors
strut tower brace
Etc
I have NO use for the above parts as they are off my v6 drag car - I do not intend on drag racing the lt1 - it is my daily driver which may hit the track once or twice a year
I am looking for $150
2) Weld drag lite 15 X3.5 wheels with brand new Moroso DS2 26 X 4.5 X 15 front runner tires mounted and balenced.
The weld drag lites need a serious polishing and I have had them for several years. They suffer from years of oxidation. There have some minor scratched on them around where the lug nuts enter.
The moroso DS2's (lightest front runner drag tire in the market) are virtually brand new and have maybe 3-5 passes on them and less than 200 miles.
I will include the lug nuts and 5/16th spacers
The tires brand new are each $119
The wheels brand new are each $100
I am looking for $300 total SOLD!!!!
3) BF Goodrich Drag radials 255 50 16's mounted on camaro 16 X 8 salad shooter wheels.
The wheels are the lightest of the oem f body wheels. The drag radials have zero tred on them but decent life left in them. If you are familiar with drag radials then you know bf goodrich drag radials get better and better regarding traction when there is less and less tread. Mounted and balenced.
I am looking for $100 for the 2 wheels and tires
4) Mickey thompson "et streets" 26 X 10.5 X 16 mounted on 16 X 8 salad shooter camaro wheels
The et streets have a maximum of 20 passes.... most... if not all... were N/A so the burn outs were small
The tires go for $160 each
Again, wheels are salad shooters so they are the lightest oem wheel.
I'm looking for $250
5) SLP cold air kit for 3.8 v6 f body - it is just the metal intake tubing - no air filters. Make an offer
6) 3:23 gears for 3 series carrier - PENDING
7) rubber elbow for cold air kit - SOLD
Cash is nice but I would prefer LT1 performance parts such as:
cold air kit
sub frame connectors
strut tower brace
Etc
I have NO use for the above parts as they are off my v6 drag car - I do not intend on drag racing the lt1 - it is my daily driver which may hit the track once or twice a year