Moving sale - everything must go

[12secondv6]

Closing date is Feb 1 for the new house.... I don't want to have to move the car also.

NO reasonable offers will be turned down.

New parts added in last post!!!!

I DO NOT want to take these parts and pack them up.... it would be MUCH easier to sell them.

1) 10 lb NOS nitrous oxide bottle which is full.

$140 OBO SOLD

2) BF Goodrich Drag radials 255 50 16's mounted on camaro 16 X 8 salad shooter wheels.

The wheels are the lightest of the oem f body wheels. The drag radials have zero tred on them but decent life left in them. If you are familiar with drag radials then you know bf goodrich drag radials get better and better regarding traction when there is less and less tread. Mounted and balenced.

$80 for the 2 wheels and tires OBO

3) Mickey thompson "et streets" 26 X 10.5 X 16 mounted on 16 X 8 salad shooter camaro wheels

The et streets have a maximum of 20 passes.... most... if not all... were N/A so the burn outs were small

The tires go for $160 each

Again, wheels are salad shooters so they are the lightest oem wheel.

$200 OBO! SOLD

4) SLP cold air kit for 3.8 v6 f body - it is just the metal intake tubing - no air filters. Make an offer

5) 3:23 gears

$40 OBO

6) Pick ANY part off my v6 race car and make an offer. A majority of people are familiar with this car..... tell me what you want... if I have it... it is yours.

Some parts off the top of my head:
PA Racing mild steel drag k member
PA Racing mild steel lower a arms
RK Sport tubular sub frame connectors
Lingenfelter supertube intake
Sparco Evo Race seat (cost $550 brand new)
Steel braided brade lines
Ported intake (upper and lower)
Ported heads
SLP 1.8 roller rockers, titanium retainers and springs
RK Sport headers
3 inch high flow cat (catco) PENDING SALE
TNT nitrous system (wet kit)
Walbro 255 LPH in tank fuel pump
4:10 gears with a POWERTRAX locker diff
Build tranny with 4200 stall nitrous converter
And MANY more parts.


If the car goes to the new house then once it arrives I will take a couple parts off it and then it goes to the junkyard.


I DO NOT intend on drag racing my trans am ANYWHERE near what I did with the v6 so I DO NOT plan on using ANY of these parts.

Thank you.

[12secondv6]

pending sale on the car.

[deadtrend1]

wow that was quick to sell the whole car

[12secondv6]

wow that was quick to sell the whole car

I recieved a PM within 6 minutes of posting it on the v6 site I am mostly on. :shock:

[12secondv6]

Pending sale on et streets.

[WayFast84]

How does $120 sound on the nitrous bottle?

[transamkid]

want that nos tank, where are you in nj

[Knipps]

want that nos tank, where are you in nj

IIRC he's in wayne, nj
http://maps.google.com/maps?q=Wayne,+NJ,+United+States+of+America&sa=X&oi=map&ct=title

edit:: james, just so you know the link in your sig is missing the ":" after http

[12secondv6]

slicks are sold

car is still available.

[12secondv6]

Pending sale on nitrous bottle.

I have it in the car...... just tell me when and where.... and I will deliver :)

[12secondv6]

edit:: james, just so you know the link in your sig is missing the ":" after http


Thanks :)

[OneFast383]

you have pics of the BFG drag radials?

[12secondv6]

you have pics of the BFG drag radials?

I'll get pictures of them later today and post them.

They cut comfy low 1.7's N/A and if you were not aware, bf drag radials get much better as they are worn in.

Pics to come later today.

[12secondv6]

you have pics of the BFG drag radials?

Here are the pics. Btw, the tires have some dirt on them.

http://www.bbbracing.com/12secondv6/dr1.jpg

http://www.bbbracing.com/12secondv6/dr2.jpg

[Blacdout96]

hm, so uch for me pickign outa few parts i wanted

[12secondv6]

hm, so uch for me pickign outa few parts i wanted

What are you looking for?
There is still loads of parts.

[12secondv6]

How does $120 sound on the nitrous bottle?

Nitrous bottle sold - thanks!

[12secondv6]

More parts added:
F body 2 guage pillar pod.

I ran this for a couple years and a couple years ago I relocated my guages to the A/C vents (I had removed the a/c system so they were useless) so I don't need this.
http://www.bbbracing.com/12secondv6/guagepod.JPG
I think they go for $40-50 new so $20 and it is yours.

Summit racing trunk mount battery box

I put the batteyr in the trunk on both my chevelle and bird.... I do not know if this is all the parts that comes with it but here is a pic:
http://www.bbbracing.com/12secondv6/batterybox.JPG
Summit sells them for $80 new so $40 and it is yours.

[OneFast383]

is there any tread on the BFGs at all or are they bald.... im not trying to dick you around i am really interested but cant see in the pics

[12secondv6]

is there any tread on the BFGs at all or are they bald.... im not trying to dick you around i am really interested but cant see in the pics
They are bald - no tread.... but that is when they are best.... and still have life left in them... and no, you aren't dicking me around, I would ask the same questions if I was buying them :)

I want to get rid of them because they are taking up space in my storage lot

[Teds89IROC]

are the brake lines 93-97 specific or are they 82-02? I know my rear calipers are the same as the early 4th gens..PBR aluminum, but I don't know about the fronts.

[Kid Racer]

hey boss man do u have a posi rear that will fit a 94 camaro

[Tru2Chevy]

hey boss man do u have a posi rear that will fit a 94 camaro

He's got the rear with 4.10s and a locker that will bolt in to any 93-02.

- Justin

[12secondv6]

Pending sale on car.... if it goes through..... I will be VERY happy due to its destination.

Brake lines - I don't want to remove them until car is in new house - also depends on if car is sold.

Rear - needs to be with car - once moved into new house, if the sale of the entire car falls through then it is available.

[Savage_Messiah]

OMFG how did i not see this thread till now?!

What's the status on the car?

PM IM or call if you want.

Would be interested in a bunch of stuff listed, mostly suspension.

I don't see the qa1s and springs listed... they still on there?

[nothingfancy]

yes email me a price and some pics on this car.
redsr20det240sx@aol.com

cashcash cash in hand $$$$$$$$$$

[Savage_Messiah]

There are pics of this car all over the internet :lol:

[JerzLT1]

ill take the gauge pod, do you have any gauges?

[12secondv6]

Hello all,

I am in the process of moving - close date of March 20.

A majority of parts are probably boxed up.

I should have pic's at home..... I will post them and we can go from there.

The guage pod is packed - I can follow-up with yopu once I move in and unpack.

A majority of the suspension parts are destined for the T/A.

Let me know what you want.

[ShitOnWheels]

yes email me a price and some pics on this car.
redsr20det240sx@aol.com

cashcash cash in hand $$$$$$$$$$

Here are the most recent pics of the car.

http://www.bbbracing.com/12secondv6/firebird

[JerzLT1]

what gauges are they? are they electric or mechanical? and do they work?

[68camaroguy]

do u still have the guage pillar

[dan]

PA Racing mild steel drag k member
PA Racing mild steel lower a arms

being that they're on a v6 i'm doubtful on the k-member, but would these parts work on an ls1 car?

[bubba428]

I'm still tryin to get those DRs

[12secondv6]

I'm still tryin to get those DRs

I know - they are in storage :(

[12secondv6]

what gauges are they? are they electric or mechanical? and do they work?


All electrical - and dunno if they work

[12secondv6]

PA Racing mild steel drag k member
PA Racing mild steel lower a arms

being that they're on a v6 i'm doubtful on the k-member, but would these parts work on an ls1 car?


Dunno if they fit an ls1.

[JerzLT1]

All electrical - and dunno if they work

any way you would be able to test them? i need fuel and N2O pressure.

[Jam]

do you have a strut tower brace ? if so PM me

[LTb1ow]

How much for the Walbro 255?

[Mike]

threads 5 months old, pm him

[Knipps]

I believe someone also has "dibs" on it

[LTb1ow]

Oh ok, I did PM him we shall see what happens.