View Full Version : lt4 hot cam
Kid Racer
01-02-2008, 08:12 PM
Hey guys my brother is telling me that an lt4 hot cam will work in my 1987 z28 iroc 350 tpi..Is this true..:shock:
sinistr
01-02-2008, 08:32 PM
i have a stock 93 lt1 cam (it has the biggest lift of the lt1's) also have all the springs locks and screw in studs .. im almost posative it will work cause someone else was interested in it for the same type of motor ... i will post up the specs after i find them
Fast92RS
01-02-2008, 08:33 PM
It will but may require a custom prom to run correctly.
sinistr
01-02-2008, 08:37 PM
93's came with a .460" lift camshaft. 94 on came with .449".
sinistr
01-02-2008, 08:39 PM
bigger injectors too ... mostlikely but dont quote me on that ...
deadtrend1
01-02-2008, 09:47 PM
Not with stock heads. Advertised lift the cam is with 1.6 rockers, so keep that in mind. But the max lift with stock heads is .470 I believe.
sinistr
01-02-2008, 09:53 PM
with 1.6 rockers it would be 490 it is advertised with stock 1.5 rockers
deadtrend1
01-02-2008, 09:59 PM
with 1.6 rockers it would be 490 it is advertised with stock 1.5 rockers
oh sorry. With 1.6 rockers the hot cam would be .525 advertised lift. .492 on 1.5's. I forgot that they advertise with 1.6 rockers since they are included in the kit. The cam by itself is with stock rocker ratio.
Still too much for stock heads.
EDIT: I don't think we are talking about hte same cam anymore are we? You talking about the 93 LT1 cam? Cause he was asking about the Hot Cam....
Tru2Chevy
01-02-2008, 10:00 PM
with 1.6 rockers it would be 490 it is advertised with stock 1.5 rockers
He's talking about the LT4 cam that the OP is asking about, not the stock LT1 cams.
- Justin
sinistr
01-02-2008, 10:07 PM
yes i understand that it was about the hot cam ... but kid racer is coming to pick up a rear from me sooooo i was throwing it out there for him :nod:
Fast92RS
01-03-2008, 09:23 AM
With the hot cam you will need to get new valve springs, the stock ones will not work.
Batman
01-03-2008, 05:12 PM
Yes it will fit, no you shouldn't buy it. Your stock heads won't flow anywhere near enough to make that cam worthwhile. It is also very lumpy and you would need new Valve srings and tuning to make it work. A standard LT1 or LT4 cam would be a better edition to your car.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.