Media Blasting

[mudjnky]

Does anyone know of a shop in South Jersey that does media blasting? I need a hood done. Thnx!

[79T/A]

How badly rusted is the hood? Or are you just looking to take the paint off? I'm actually media blasting a rusty subframe in my garage. If you have a decent compressor, you can rent or borrow or buy a blaster and get it done. I buy my media at Tractor Supply Co. $6.65 for a 50 pound bag.

[WildBillyT]

How badly rusted is the hood? Or are you just looking to take the paint off? I'm actually media blasting a rusty subframe in my garage. If you have a decent compressor, you can rent or borrow or buy a blaster and get it done. I buy my media at Tractor Supply Co. $6.65 for a 50 pound bag.

Are you using sand or baking soda?

[Untamed]

Won't sand pit the metal? Not a good choice for removing paint I thought. :shrug:

[WildBillyT]

Won't sand pit the metal? Not a good choice for removing paint I thought. :shrug:

There is that but it can also overheat and warp it. Sand is not recommended for body panels. Great for thicker metal like subframes and suspension parts though.

[mudjnky]

It has some surface rust, mostly to remove the paint. I want the top and bottom done and then primed. I had thought about doing it myself, but I really don't have the time or desire to go through the whole process. I'd rather just drop it off and pick it up done.

[HardcoreZ28]

Bill is right sand can heat the metal up and cause it to warp. So can a few other medias......the Mustang I'm working on now was warped using aluminum oxide....idiots!

Not sure how far you're willing to travel but there's a guy I use sometimes up here in Hillsborough who used baking soda. Place is called Final Strip and you'd want to talk to Richie.

[mudjnky]

I've read some comments on other boards that people don't want to use soda blasting. Any idea why?

[HardcoreZ28]

I've read some comments on other boards that people don't want to use soda blasting. Any idea why?

No idea. Soda will actually help bare metal products last the longest before rust sets in.

[trashman01]

prob cuz it isnt as abrasive as wal-nut or sand

[WildBillyT]

No idea. Soda will actually help bare metal products last the longest before rust sets in.

I think managing the humidity when you are soda blasting is a big deal...

[BonzoHansen]

According to the new PHY, walnut shells can leave an oily residue that can come back up later. Soda can cause corrosion issues; it must have salt in it or salt like properties. Plastic media may be the most happy medium. But it won't remove rust.


...moving to restoration forum....

[johnjzjz]

According to the new PHY, walnut shells can leave an oily residue that can come back up later. Soda can cause corrosion issues; it must have salt in it or salt like properties. Plastic media may be the most happy medium. But it won't remove rust.


...moving to restoration forum....

your right walnut and corn huskers will leave a color of brown and a yellow we use walnut to obtain a 60s finish on an intake like a 302 cross ram need it show clean and cant have the new glass bead look -- my blaster is using a lot of soda and from what he has said their is a wash after - dont know what he is using but i might be able to find out

[HardcoreZ28]

Yeah soda will leave an base residue on the metal....base as in the opposite of an acid. Is that alkalinic? haha I guess I'm not smarter than a 5th grader.

Also soda blasting will not remove rust from what I've heard unless it's minor surface rust.

[BonzoHansen]

No, soda won't remove rust.

[transamkid]

look for a product called black beauty, its a coal slag byproduct and will get anything off. used to use it when i worked at the sandblaster and is by far the best all around media. they sell it for like $20 i think for a 100lb bag

[WildBillyT]

look for a product called black beauty, its a coal slag byproduct and will get anything off. used to use it when i worked at the sandblaster and is by far the best all around media. they sell it for like $20 i think for a 100lb bag

Are you serious? :shock: For a hood??

[BonzoHansen]

Are you serious? :shock: For a hood??

Smooth hoods FTL. :rofl:

If you keep the PSI low, it would work. I did a fender like that with no problems. But you have to pay attention. Easy to screw up.

[transamkid]

yes, we used to do whole cars with it, you just use a different grit for what type of finish you want

[DaSkinnyGuy]

Media and sand blasting are two different things, in media blasting which is the recommened way to remove paint off a car is with a different type of material, my brain is tired I can;t think of what they use like they are little pellets of maybe glass?

[BonzoHansen]

Media and sand blasting are two different things, in media blasting which is the recommened way to remove paint off a car is with a different type of material, my brain is tired I can;t think of what they use like they are little pellets of maybe glass?

Sand is a type of media. Anything you blast is media, be it baking soda, beach sand, glass bead, walnut shells or gravel. Just like selecting sand paper, picking the right 'grit' media for the job is vital.

[String]

howabout the liquid paint stripper in a can for about 6 dollars? haha

[rscamaro73]

Who do we have that we can go to in Central Jersey (nearest to Trenton) to get some suspension pieces blasted and powder coated ??

Just need a pair of lower spring plates for now :-P.

Thanks....

[WildBillyT]

Paul (HardcoreZ28) can blast and coat them for you Wayne. He did some suspy parts for me and they came out great.

[rscamaro73]

How would I contact this fella and where's he out of ??

woulda had the local place here do it, but he left aboot a year ago...

EDIT - nevermind....i just scrolled up....duh.

[WildBillyT]

Yeah, he's in Hillsborough NJ, which is a little ways from you. He's a site sponsor- RPM Resto.