the seafoam that killed the starter HAHA

[bubba428]

http://media.putfile.com/SEAFOAM-71

the starter never disengaged, blew the gear aright off.

[91DropTop]

if i lived on your block i would of called the fire dept!!

[chrisfrom nj]

if i lived on your block i would of called the fire dept!!i agree with you

[tonymazz1]

wow the inside of your car musta smelled for a few days lol

[TheBandit]

OT but tonymazz you found a car? i remember talking to you on ls1tech

[JL8Jeff]

You should have seen my 2000 SS when I ran the Seafoam through it. Much worse than that and I did it twice! The LS1 cars have a problem with the PCV setup pulling oil into the intake and I could see the oil buildup on the TB so I decided to do the Seafoam twice. You should see when you drive it down the road at 3-4000 rpm's! I had a white smoke trail for about 2 miles and it cleared up just as I went around a corner and passed a cop. It definitely helped the car even with only 42K miles on it. I now run a filter on the PCV setup to catch the extra oil.

[Knipps]

The REAL spyhunter smoke screen :lol:

[band77one]

" i have a car full of seafoam. thats not good."

[bubba428]

" i have a car full of seafoam. thats not good."

it was coming in through the fire wall, thats why.

[Demonicbird00]

dam thats alotta smoke. your car had more smoke on startup then mine did from idling for 10 mins and then doing a spirited drive

-brandon

[bubba428]

dam thats alotta smoke. your car had more smoke on startup then mine did from idling for 10 mins and then doing a spirited drive

-brandon

carbs are fun....and that was an ENTIRE can dumped in it all a once...while it was off :rofl:

[deadtrend1]

carbs are fun....and that was an ENTIRE can dumped in it all a once...while it was off :rofl:

I figured that was what you did since your motor sounded super advanced when you intially tried to start it.

I wouldn't put the blame on the seafoam then .............

[bubba428]

I wasn't blaming the seafoam....

[98tadriver]

arent you only supposed to use 1/3 of a can, slowly pouring it?

[Mike Something]

arent you only supposed to use 1/3 of a can, slowly pouring it?
Slowly pour it in or the car will stall out... But I always use the entire can.

[bubba428]

I was cleaning out the carb with gum cutter, than started it with a can of gum cutter in there...shot huge flames...it was awesome....I've done this a few times before whole can in the carb. takes about 20mins but the car runs freakin awesome when I'm done

[String]

gotta love the seafoam!

[camaro2you]

well thats a good way to hydrolock a motor.....

[98tadriver]

well thats a good way to hydrolock a motor.....

i was thinking the same thing, thats why i follow the directions on the back of the can lol

[chrisfrom nj]

bubba wants to blow the ta motor so the v6 camaro gets done lol

[bubba428]

bubba wants to blow the ta motor so the v6 camaro gets done lol

NO NO NO.....so I can order a "replacement" crank and stroke it as far as I can go.