Mensaf
04-16-2008, 10:56 PM
PRICE:$4200obo
ITEM: 1987 Pontiac Trans Am WS6
DESCRIPTION:
'87 Pontiac Trans Am WS6
98xxx miles
T-Tops :D
Automatic Trans
305 TPI Motor
Oil Changes done with AMSOIL
Hooker headers (shorties)
Magnaflow exhaust
3" piping
Fiberglass Ram-Air Hood ($750)
Fiberglass wing ($425)
Remote Starter/Door lock/unlock. ($175)
Just did tune up w/NGK Iridium plugs, wires, etc. ($275 just for parts)
Matrix Bucket seats installed now, but will most likely come with stockers.
All options, including rare t-bar set.
Needs:
Heater core replaced. I have the part and will probably do it within the week. It takes about 20 minutes to do, but I'm putting it here in case I don't get around to it.
Needs a rear. Fairly inexpensive and easy to replace. This actually opens up the opportunity to pick and choose what kind of rear and what gearing you would want. If I replace it, price will most likely go up. Seriously though, a replacement posi unit from an overpriced online retailer is $250. Local junkyard is in the range of $75, and it's about 45 mins worth of labor (an hour rate if you take it to a shop). I still drive it every day, so it's not all that big a deal, just loud.
That pretty much sums it up.
------------------------------------------------------------------
NAME: Omar Rimawi
PHONE NUMBER: 973-901-8105, thought it's far from the best way to reach me during the daytime.
EMAIL: Mensaf86@gmail.com
LOCATION: Clifton, NJ
PAYMENT PREFERENCE: Car or cash.
PIC: http://i239.photobucket.com/albums/ff166/Mensaf/Sonics%20Run%203-20-08/IMG_0695-1.jpg
Engine has been cleaned up a bit since this was taken.
http://i239.photobucket.com/albums/ff166/Mensaf/IMG_0635.jpg
I'll go out later today to snap some pics of the interior, hopefully after changing the heater core. For now, I'll leave you with this picture in its place:
http://i239.photobucket.com/albums/ff166/Mensaf/IMG_0761.jpg
ITEM: 1987 Pontiac Trans Am WS6
DESCRIPTION:
'87 Pontiac Trans Am WS6
98xxx miles
T-Tops :D
Automatic Trans
305 TPI Motor
Oil Changes done with AMSOIL
Hooker headers (shorties)
Magnaflow exhaust
3" piping
Fiberglass Ram-Air Hood ($750)
Fiberglass wing ($425)
Remote Starter/Door lock/unlock. ($175)
Just did tune up w/NGK Iridium plugs, wires, etc. ($275 just for parts)
Matrix Bucket seats installed now, but will most likely come with stockers.
All options, including rare t-bar set.
Needs:
Heater core replaced. I have the part and will probably do it within the week. It takes about 20 minutes to do, but I'm putting it here in case I don't get around to it.
Needs a rear. Fairly inexpensive and easy to replace. This actually opens up the opportunity to pick and choose what kind of rear and what gearing you would want. If I replace it, price will most likely go up. Seriously though, a replacement posi unit from an overpriced online retailer is $250. Local junkyard is in the range of $75, and it's about 45 mins worth of labor (an hour rate if you take it to a shop). I still drive it every day, so it's not all that big a deal, just loud.
That pretty much sums it up.
------------------------------------------------------------------
NAME: Omar Rimawi
PHONE NUMBER: 973-901-8105, thought it's far from the best way to reach me during the daytime.
EMAIL: Mensaf86@gmail.com
LOCATION: Clifton, NJ
PAYMENT PREFERENCE: Car or cash.
PIC: http://i239.photobucket.com/albums/ff166/Mensaf/Sonics%20Run%203-20-08/IMG_0695-1.jpg
Engine has been cleaned up a bit since this was taken.
http://i239.photobucket.com/albums/ff166/Mensaf/IMG_0635.jpg
I'll go out later today to snap some pics of the interior, hopefully after changing the heater core. For now, I'll leave you with this picture in its place:
http://i239.photobucket.com/albums/ff166/Mensaf/IMG_0761.jpg