this cam/lifer/head crap is driving me nuts

[band77one]

i just need to know if my car is a roller cam or not so i can order my cam kit and roller rocker arms. can anyone please for the love of god tell me i have no patience left.

[bubba428]

the 327 block is going to be hydrollic flat tappet but the heads are going to be from a roller motor...so what you do is you order the cam you want, install it and get a push rod tool to measure your pushrod length...

[band77one]

305

[Pampered-Z]

305


What year? I think the 305 went roller around 86

[band77one]

88, someone on TGO told me yes it is.

[bubba428]

87.....I'm pretty sure it is...what exactly are you doing? I though you were building a 327?

[deadtrend1]

87 was the change over year. The motors switched to roller lifters, centerbolt valve covers, and remote coil distributors.

86 was the changed over from 2 piece to 1 piece RMS but I'm not positive on that.

[band77one]

im not doing anything now. vics autobody ****ed up my car now the whole thing has to be repainted. >=0

[Knipps]

:omg: what happened??

[WildBillyT]

im not doing anything now. vics autobody ****ed up my car now the whole thing has to be repainted. >=0

HUH?:shock:

[Tru2Chevy]

87 was the change over year. The motors switched to roller lifters, centerbolt valve covers, and remote coil distributors.

86 was the changed over from 2 piece to 1 piece RMS but I'm not positive on that.

Yes, you're right on all counts. '87 was also the year of the quasi-serpentine belt setup. There was a serp belt around the crank / waterpump / alt, and v-belts for everything else.

- Justin

[deadtrend1]

Yes, you're right on all counts. '87 was also the year of the quasi-serpentine belt setup. There was a serp belt around the crank / waterpump / alt, and v-belts for everything else.

- Justin


My 86 motor had that setup also.

[band77one]

thanks for all the help guys, when im able to build a motor i know what im doing now, but since Vic;s Autobody, located in Clementon NJ, did not properly seal my car and i guess its the primer? that is bleeding through the paint, the whole car has to be redone. but thats ok. the car will be done in around a month, will post up pics as progress is made. sorry for the off topic.

[//<86TA>\\]

My 86 motor had that setup also.

mine too
________
VIDEO REVIEW (http://videoreviews.org)

[bubba428]

My 86 motor had that setup also.

my motor ain't an 86, but I have the 86 belt set up, and its like that


Sorry to hear about your paint...

[Tru2Chevy]

My 86 motor had that setup also.
mine too
my motor ain't an 86, but I have the 86 belt set up, and its like that

I guess whoever I heard that from was full of it then. I could have sworn everything pre-87 was pure v-belt, but I guess I was mistaken.

- Justin

[bubba428]

I think your only a year off....my buddies 2 87s have regular serpentine with a tensioner.

[Tru2Chevy]

I think your only a year off....my buddies 2 87s have regular serpentine with a tensioner.

Nope, that was def. 88+ My 87 and every other '87 I've seen is the serp/v-belt setup.

- Justin

[sweetbmxrider]

why were u getting it painted??

[V]

if the block has 3 tapped bolt holes in the middle of the lifter valley, its a roller block. thats where the lifter retainer mounts.