Log in

View Full Version : Couple of 4th gen muffler back exhausts

JL8Jeff
05-14-2008, 10:41 AM
I have a couple of muffler/tailpipe setups if anyone needs exhaust for a 4th gen. Might fit 3rd gens, but I'm not sure. First one is a Flowmaster with tailpipes to 3-1/2" tips. The connection going into the muffler was cut short so it would definitely need to be welded to the over axle pipe to work. The tailpipes are welded to the muffler. $25

The second is a Jardine muffler/tailpipes with 2-1/2" stainless GMMG angle cut tips. This also has the tailpipes welded to the muffler but the muffler inlet is fine and can be clamped up to any over axle pipe. $75

I'll try to get some pictures of them tonight after work but feel free to pm me or email me specifically for information.
76bumblbrally
05-17-2008, 08:19 PM
ill take some pics of the flowmaster set up PM me for my email
Slo86Bird
05-19-2008, 08:29 PM
on flowmaster, how big is the input pipe?
JL8Jeff
05-20-2008, 05:39 PM
Flowmaster is 3" inlet as is the Jardine. Here's a picture of the Flowmaster. It has the LS1 extra hangers for the rear section and I think I have the frame inserts to mount them. I had to take them out to install my hitch.
JL8Jeff
05-20-2008, 05:53 PM
The Jardine has a nice mellow tone to it and is great under cruising conditions. It will open up and get a little loud at WOT but it's not real loud. The tips are the GMMG slash cut tips and are adjustable.
pdiminico
05-22-2008, 10:58 PM
The Jardine has a nice mellow tone to it and is great under cruising conditions. It will open up and get a little loud at WOT but it's not real loud. The tips are the GMMG slash cut tips and are adjustable.

Would you sell the 2 1/2 tips?
Let me know how much.