View Full Version : Some pics of my car at JS Performance!
WayFast84
05-27-2008, 07:11 PM
I went up Sunday for the EPFBA Meet. I didn't get a chance to socialize because I was busy putting my interior in the firebird. The only pieces in the car were the Dash, passenger compartment carpet,door panels, drivers seat and center console(with shifter).
Here are some pic's I took with my cell.
http://i13.photobucket.com/albums/a286/Wayfast84/hurst.jpg
http://i13.photobucket.com/albums/a286/Wayfast84/seatandshifter.jpg
http://i13.photobucket.com/albums/a286/Wayfast84/motor.jpg
More pics coming soon when i get them on the computer!
Edit # 1 The blur on the engine bay is my thumb, I was holding my hood up and its hard to take a picture with a ENV with one hand.
BonzoHansen
05-27-2008, 07:43 PM
All right!
WayFast84
05-27-2008, 07:51 PM
More pics!
http://i13.photobucket.com/albums/a286/Wayfast84/skinny.jpg
Skinnies up front(yeah those are DR's up front!!)
http://i13.photobucket.com/albums/a286/Wayfast84/backseat.jpg
Got the back seat in! I couldn't bolt the drivers side Butt cushion to the bracket..I need some pliers to get the ring back into its normal location.
http://i13.photobucket.com/albums/a286/Wayfast84/interiorpiece.jpg
It took me 30 Minutes to figure out where that piece went!! It went under the hatch, and thats why I couldn't figure it out!
All In all, I need to get a headliner and the plastic screws to put the interior completely together, But I think I'm going to wait till I can get some MINT plastics and Have Paul at RPM paint them and make it look real nice!
I also cant beleive how much room their is in the engine compartment now!
!heat and !power steering make the compartment so much cleaner looking!! When I get the car back, I need to get the rust off of my heads and the alternator spinner thingy, and polish my intake. If anyone knows what stuff i should use let me know!!
Teds89IROC
05-27-2008, 08:10 PM
looks good! What engine combo is that?
WayFast84
05-27-2008, 08:25 PM
looks good! What engine combo is that?
Its a 400sbc with vortec heads and performer rpm intake, speed demon 750,th350 and 3500 stall. I don't know the cam specs off the top of my head.
Tru2Chevy
05-27-2008, 08:26 PM
Do you know what cam it is? Off the shelf?
- Justin
ar0ck
05-27-2008, 08:27 PM
Looks good Matt. I wouldn't worry about polishing anything else on your motor, just clean it up by hand and enjoy the dam car.
yeah, when you get it back dont mess with the rust........just clean it, dry it and leave it be
looks a TON better then when i delivered it.......
stoney2677
05-27-2008, 08:42 PM
More pics!
http://i13.photobucket.com/albums/a286/Wayfast84/skinny.jpg
Skinnies up front(yeah those are DR's up front!!)
http://i13.photobucket.com/albums/a286/Wayfast84/backseat.jpg
Got the back seat in! I couldn't bolt the drivers side Butt cushion to the bracket..I need some pliers to get the ring back into its normal location.
http://i13.photobucket.com/albums/a286/Wayfast84/interiorpiece.jpg
It took me 30 Minutes to figure out where that piece went!! It went under the hatch, and thats why I couldn't figure it out!
All In all, I need to get a headliner and the plastic screws to put the interior completely together, But I think I'm going to wait till I can get some MINT plastics and Have Paul at RPM paint them and make it look real nice!
I also cant beleive how much room their is in the engine compartment now!
!heat and !power steering make the compartment so much cleaner looking!! When I get the car back, I need to get the rust off of my heads and the alternator spinner thingy, and polish my intake. If anyone knows what stuff i should use let me know!!
in the last pic is that a 2nd gen camaro next to you? orange?
WayFast84
05-27-2008, 08:47 PM
I don't want to polish the manifold, I just want it to look cleaner, It looks a little oxidized..
in the last pic is that a 2nd gen camaro next to you? orange?
Yeah, its yours isn't it? whats the story with the car? I was checking it out, and it looked like it had "part" of a roll bar, and that the door bars were missing. Its kind of weird, how close, Metuchen and Edison are together and our cars are sitting right next to each other. In PA
JL8Jeff
05-27-2008, 08:48 PM
in the last pic is that a 2nd gen camaro next to you? orange?
Yup, I think it was a 70 sitting there. There might be some pictures of it on Josh's website.
yeah its yours stoney. lol i checked it out last time i was over there, gonna be a nice car
//<86TA>\\
05-27-2008, 09:28 PM
I don't want to polish the manifold, I just want it to look cleaner, It looks a little oxidized..
The oxidation will clean up real nice with a wire wheel, then hit it with some clear and it will stay clean for a good long time, i need to break down and do mine too. I like the look of bare cast aluminum.8-)
________
Wellbutrin settlement update (http://www.classactionsettlements.org/lawsuit/wellbutrin/)
WayFast84
05-27-2008, 09:47 PM
I just noticed, i love the valve covers!!!!!!!! thanks baddest434!!!!!!!!!!!!!!!!
sweetbmxrider
05-27-2008, 10:29 PM
looks good. little bit of antifreeze on the intake there
stoney2677
05-28-2008, 06:05 AM
I don't want to polish the manifold, I just want it to look cleaner, It looks a little oxidized..
Yeah, its yours isn't it? whats the story with the car? I was checking it out, and it looked like it had "part" of a roll bar, and that the door bars were missing. Its kind of weird, how close, Metuchen and Edison are together and our cars are sitting right next to each other. In PA
that is funny. have to travel sometimes to find good work. used to travel to jpr oops did i just say that outloud? anyway engine gettin refreshed new hood, wheels and tires, suspension, gauges, exhaust, and a 300 shot j/k bout the 300.
JSPERFORMANCE
05-28-2008, 06:47 AM
a 300 shot j/k bout the 300.
Dammit! you had me all exited for a second there!
Kojak
05-28-2008, 10:34 AM
Very nice
Untamed
05-28-2008, 10:59 AM
Well done Matt. You've come a long way in the last year or so.
I still think you need a white exterior with black accents, power bulge hood with the 15th anniv bird and stripes, to match the white interior.
You're getting there. Keep going!
HardcoreZ28
05-28-2008, 01:06 PM
Matt....car looks like it's coming out great man. A little persistence has paid off in big dividens....congrats. If you need those interior pieces painted just let me know.
stoney2677
05-28-2008, 03:50 PM
Dammit! you had me all exited for a second there!
you just worry bout gettin that thing runnin.:wink: ill keep tryin to persuade the wife. :nod:
chrisfrom nj
05-29-2008, 08:14 PM
matt the car is looking great i cant wait to see it when its done
baddest434
06-06-2008, 12:26 PM
looks real good matt. but get the breather from UBG and take that rubber plug out. it will look better imo
WayFast84
06-06-2008, 10:19 PM
Do you know what cam it is? Off the shelf?
- Justin
Its a summit grind cam. Ill get the specs, I basically duplicated a combo that went 12.1@110 the only difference was he had more compresion and some port work to the heads, he was at 3700+ race weight, and he also had 4.10's. He stated that 3.42's or at max 3.73's would be best for the combo so, when 12 bolt times come ill probably get 3.42's. I also have 3500 rpm converter verses his 3000. Plus the nitrous, so hope fully when Its at its full potential in a few years It will be a fun car :mrgreen:
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.