Head gasket swap and some beer.

[Jersyboyy]

I just ordered the new head gaskets & Im about to start tearing apart the motor waiting for them to come in.

The 22nd I will be working on swapping my bad head gasket('s) out. Ill have ICE COLD BEER of your choice waiting for anyone who wants to join me in working on a great american muscle car. A CAMERO!!!!!!!!
Sayreville NJ exit 129 off the parkway.
Let me know who wants to help out and ill add you to the list.
1.UGB FTW!!
2.nj96z28
3.SamhainRS27
4.xrelapse13
5.NastyEllEssWon WITH TOOLS!!

Maybe's
6.sweetbmxrider(maybe)
7.Numbertwo & Kat (hmm)
8.darkknight(lots of wrenches to hand to us?)
9.BigAls87Z28(maybe)

[unstable bob gable]

I just hope you get more of a turn out then I got today! And I wasn't looking for any help, just wanted people to hang out and drink some beer!
Anywho, put me down on the list to help you.

[nj85z28]

why sayervillle

[Savage_Messiah]

I think because he lives there, lol

[Jersyboyy]

Lol yup. Its not that far tho I mean I drove to toms river a few weeks ago in my car to get my hood.

[unstable bob gable]

And just for the record, you mouth breathing, slack jawed, jabronies need to pull yer heads outa where ya fart and HELP THIS GUY!!! Getting another turd gen Camero back on the road im more f'n important than any jive azz, mumbo jumbo, anybody can come up with! :-x

[Kat]

Maybe... I gotta see whats going on that day.. Shouldnt be to hard to replace them on a bare bones carbed motor. As long as there are some people there comeptent enough and willing to bust some ass. lol.

[NumberTwo]

Maybe... I gotta see whats going on that day.. Shouldnt be to hard to replace them on a bare bones carbed motor. As long as there are some people there comeptent enough and willing to bust some ass. lol.
Im willing to play gopher if ya go, Kat. He cant be anymore than 10 mins from me, and you've already been here so...

[Kat]

**** Kirk.. If ya show up.. Beer will be drunk and **** will get done.. Hrmm I'll hit ya up on IM night this week.. :)

[Jersyboyy]

HELL YEA UBG!!!

[sweetbmxrider]

HELL YEA UGB!!!

UBG- Unstable Bob Gable

yeah....oh and if i'm free, ill take the trip. gotta bump me a couple days notice

[xrelapse13]

I can come by and help you out man. I'll have my new rim back on too by then so u can finally see the bird and not the much frowned upon Mazda 6 haha.

EDIT: and i mite have my new quad tip magnaflows on by then too.

[CamaroGirlie]

I just ordered the new head gaskets & Im about to start tearing apart the motor waiting for them to come in.

The 22nd I will be working on swapping my bad head gasket('s) out. Ill have ICE COLD BEER of your choice waiting for anyone who wants to join me in working on a great american muscle car. A CAMERO!!!!!!!!
Sayreville NJ exit 129 off the parkway.
Let me know who wants to help out and ill add you to the list.
1.UGB FTW!!
2.
3.
4.
5.
6.
7.
8.

See....I would come cuz I think ur like super hot.....but I don't know a damn thing about cars (even tho I like to pretend I do) and I don't drink beer, I'm a whiskey girl lol

[Jersyboyy]

Your still welcome to come out and attempt to get your hands dirty. Im not really a beer guy either, I like the clear stuff. Productivity is a must for the 22nd but maybe another time when we can all just hang around and bs ill have some whisky.

[Dark_Knight7096]

I'm good at handing wrenches to people.


That's about it.

[BigAls87Z28]

Ill see if I can put off for that Sunday. Ill get back to ya on that.

[xrelapse13]

what time u gonna be working on it sunday? Cause i just found out that i gotta head up to mass for the weekend and am gonna be comign back sunday, that week though i can come by and help if u need since im pretty close to u.

[SamhainZ28]

hey, i'm in sayreville too, count me in. Need any tools?

[nj96z28]

ill come drink beer and be useless.

[unstable bob gable]

Nobody is "useless" when they come to help a fellow hot rodder out. Just the comradery alone adds to the positive vibe of the day. And good ideas can come from anyone, not just the guys holding the wrenches. Plus knowledge can be passed around, and new skills aquired. And it adds to the faith that people can and will show the milk of human kindness and help another person out.

[NastyEllEssWon]

got tools? or should i bring some of mine???

[Jersyboyy]

Havnt checked this thread for a day or two and just noticed a bunch of positive posts.
Here I almsot thought you guys were going to let me down! :(
I have some basic tools and a buddy of mine has a decent set but if you guys would like to bring an extra set that'd be great, torque wrench will def be needed.

O time? well im off all day sunday so Id like to start as early as everyone would like to make it.
Ill be trying to finish taking everything apart this week, and preping the heads and block sat night.

[NumberTwo]

How are your neighbors going to handle a bunch of cars parked all over the street? Your area seems nice and quiet.

[NastyEllEssWon]

i have inch pound torque wrenches and ft lb tq wrenches...ill bring both...anything else you need that you can think of let me know...i have
tons of tools...

[sweetbmxrider]

gasket remover tool and cleaner?

[NastyEllEssWon]

i have a carbide gasket remover as well...and gasket eater...ill bring that...keep the list coming

TORQUE WRENCH FT LB
TORQUE WRENCH IN LB
GASKET EATER
CARBIDE GASKET REMOVER

anything else??? flare wrenches??? anything?

[Kat]

http://boxwrench.net/specs/chevy_sb.htm

[Jersyboyy]

My family has been here for about 30 years. Were notorious for crazy loud family parties, tons of people over, and alot of cars parked all over. Just dont speed down my block or rev your motor or burnout and were good!
Tools tools tools...bring em on!
& Kat- That was an awsome website. Im hoping to not need that by having some experienced guys and gals working on this thing with us.

[unstable bob gable]

Yo, Ali Baba...
Post up yer addy or PM it to me. I'm anal and like to work out me trip details in mucho advance.

[NumberTwo]

My family has been here for about 30 years. Were notorious for crazy loud family parties, tons of people over, and alot of cars parked all over. Just dont speed down my block or rev your motor or burnout and were good!
Tools tools tools...bring em on!
& Kat- That was an awsome website. Im hoping to not need that by having some experienced guys and gals working on this thing with us.
IMO Kat is all the experience you need. You're on Creamer Dr no?

[Jersyboyy]

NumberTwo either your the thirdgen iv seen coming down my street or your stalking me! LOL either way you are correct.
Bob pm sent
Any one else who is definite on coming. Let me know so I can pm you my address.

[Kat]

& Kat- That was an awsome website. Im hoping to not need that by having some experienced guys and gals working on this thing with us.

Actually, the reason why I posted that, well I don't think that many people remember the head bolt torquing sequence.. :D I know I sure as hell dont. Even after all the head jobs I've done..... uhh... well err umm yeah. lol

[Jersyboyy]

LMAO KAT

[NastyEllEssWon]

lol i always have a piece of paper with the tightening sequence written down. its a lot of remembering...lol on a good day i can wing the firing order :nod:

[Jersyboyy]

Nice to know their are some people with alot of knowledge willing to help me out.
So I found a great deal on a cam and lifter setup on craigslist. Comp Cam #12-212-2 (http://store.summitracing.com/partdetail.asp?part=CCA%2D12%2D212%2D2&autoview=sku), and #812-16 lifters (http://store.summitracing.com/partdetail.asp?part=CCA%2D812%2D16&autoview=sku)for 75 bucks. Woo HOO .480 lift with more power and some real lobe!!

[NastyEllEssWon]

are we swapping cams too???? :nod:

[Jersyboyy]

If you guys are down I know Id like to! ;)

[Jersyboyy]

SamhainRS27 were you on washington rd tonight at around 730. I Gave you the thumbs up, I was in my comcast work truck. Any who if that was you nice whip. You coming to help a brotha out?

[NastyEllEssWon]

you can get ubg on the heads while i rip apart the front of your motor i believe we can get a cam swap and head gaskets done :nod:

[LTb1ow]

Where are you located roughly?

[Jersyboyy]

Sweet most of the motor is apart im taking the heads off and the balancer and timing chain cover off today.

129 off the parkway. Im located in Sayreville.

[SamhainZ28]

:DSamhainRS27 were you on washington rd tonight at around 730. I Gave you the thumbs up, I was in my comcast work truck. Any who if that was you nice whip. You coming to help a brotha out?

yep that was me just out cruisin. I usually tend to not notce work vans lol but thanks for the thumbs up

[NastyEllEssWon]

wtf i thought we was doing this on the 22nd???

[NastyEllEssWon]

you can list me as well. ill be bringing some tools as well....anyone got a preference to beer brand??? ill be bringing some lite:rofl::moon::moon::moon:

[Jersyboyy]

We is doing this on the 22nd I just wanted to get most of the bd work out of the way. Taking stuff apart isnt as big of a project as putting it all back together. As long as I can get the cam and lifters by then itll be a sinch.
I need to talk to the guy of craigslist again, unless I can find someone on here with a decent cam and lifters for under 100.

[Jersyboyy]

O btw anyone planning on coming have a copy of windows that I could use to finally fix my computer with?

[xrelapse13]

i got a copy of windows vista ultimate if u want

[Jersyboyy]

I hate vista but if thats all I can get bring it on!

[xrelapse13]

i'll see if i can get a copy of xp.

But on a side note i finally got my new rim today and was out all day after 5 rompin on the t/a and wasted probly like a quarter tank of gas hahahah

[Jersyboyy]

Well a few factors have come in to play in my decision to post pone project build a thon. Only a few members have expressed certainty in coming on sunday, I just got suspended pending investigation from my job, I havnt gotten the new cam yet. I will be postponing form this sunday untill next month in hope that more people will actually be excited to help a fellow fbody, muscle car guy, and general fun loving beer drinking guy out with his car, when that day comes and I have the new cam single plane intake and my heads ported ITS ON!!! & if no one again wants to come then ill just rub my magic lamp and ask my genie to help me! Lata

[NumberTwo]

Ill still do a drive by on my way to dinner Sunday. :D

[Knipps]

Ill still do a drive by on my way to dinner Sunday. :D

http://www.granitegrok.com/pix/uzi.jpg

?!?!?

[Jersyboyy]

lol I hope not with that. you guys forget im half Afghan, nicknamed by ubg as prince Ali Baba? no all joking aside swing by ill be here tinkering with parts cleaning them up preping them for some fresh paint.
I found the brackets I need to mount my alt with out drilling holes in the old school heads I got.
Will be sending the heads out to a machine shop next week to run through them.
Also will be ordering a major amount of parts needed next week!
Once my stimulus check comes in ill be able to get everything I need and we can call the build back on!!!

[xrelapse13]

lol I'm all up for whenever you reschedule this thing. If u get the car runing before all that hit me up to cruise sometime.

[Jersyboyy]

You know what bro. Im tired of fixing this pile o junk and it not working. Time for a decent f body in my household!! I have the headgaskets I just wanted to wait untill i got enough money together for a whole buildwith my old school heads and a new cam and blah blah but -(found out those old school heads I got were stock 194 150 heads not 202s like i thought, and their stock porting, and their stock springs, ALL STOCK not all done up like I was told). F*** that im buying the water pump and intake next week and im going to just fix the main issues to get it running next week/end my self ill pm you but Im not going to have a big group of guys over. Im going to get this thing running and prob sell it soon.

[xrelapse13]

ah that sucks man. Selling and maybe looking into an LT1? Either way hit me up sometime, I'll probably be at that car meet tomorow at applebees on ryders lane in milltown.

[Jersyboyy]

You wanna come pick me up and ill throw you gas moolah? Na not an lt1 i was thinking anls1 actually but we gotta see. I just sent my 69 heads to the machine shop yesterday so im well on my way to getting my car running again a few more weeks hopefully not much longer.

[Tru2Chevy]

Bah.....just get a clean 3rd gen!

- Justin

[Jersyboyy]

Been thinking about that too but if I were to dump close to 2000 on a nice clean thirdgen, Ill have a car with a 305 at best a 350tpi with no less than 90 thousand miles leaky ttops dirty interior and fading paint.
2000 is a nice down payment on a 99 trans am, more reliable looks nicer and all.

Either way my car will be running before I make a decision, who knows I might just keep her around.

[Jersyboyy]

Heads are OFF!! I cracked on of my heads, the opposite head that cracked last time. The gaskets the shop used were felpro mls too and it cracked just about all the way through the gasket.

I have a set of steel shim mr gasket head gaskets for .40 over bore which im going to be using when I put this thing back together. Just gota wait for my new parts to be ordered(need to collect some money first) and my double hump heads to have their valve job finished!

[Jersyboyy]

Well i Just ordered my new water pump air filter and cam lube from summit. I also ordered my alt relocation bracket from alan grove(thanks wildbillyt) I also sent paypal payment for a new(to my car) Performer rpm intake.

All I need now is a good cam,lifter and timing chain setup and y-pipe/radiator from chrisfromnj and the beast will be back on the road!

[sweetbmxrider]

sweet

[Jersyboyy]

YUP. Summit sent me in the mail a coupon for 30 dollars off any purchase of 100 or more. So i spend just about 100. Now I have another 250 worth of parts to order but I refuse to do so with out another 2 coupons. lol
So if any of you get one in the mail and dont need it. Please pm me.