PDA

View Full Version : Wheel Powdercoating Special !

HardcoreZ28
07-02-2008, 09:01 PM
Well as many of you know I haven't had the proper oven to do wheels in for the most part up until now. I've entered into an agreement with a buddy of mine and I can now do wheels for you guys.

From now until the end of July I'm going to run a discount on doing them. The price will be $500 to sandblast and powdercoat a set of wheels up to 17". That's for basic colors that don't require a topcoat. If a topcoat is required the price goes up about $100.

PM me if you're interested.
Fast92RS
07-02-2008, 10:30 PM
Can you dismount the tires from the wheels and remount or do you just take wheels only?
Jersyboyy
07-03-2008, 12:45 AM
Yes good question. Also would it be slightly cheaper depending on sized or jut flat out 500 for all wheels 17" and under? What colors are included that do not need a top coat?
HardcoreZ28
07-03-2008, 07:46 AM
Wheels only or I can have the tires dismounted and mounted for an additional fee...probably about $25 a wheel.

The price right now is a flat $500 per set up to 17". That's just under the normal price for 15's and $120 cheaper than a set of 17's would normally cost you.
Jersyboyy
07-03-2008, 08:35 PM
Alrite that sounds like a pretty good deal. Im polishing up my wheels this week if they dont look up to par after a good polish I might consider powdercoating them towards the end of the month!
90FormulaWS6
07-05-2008, 12:09 PM
How much for hub caps on the tank?
HardcoreZ28
07-05-2008, 10:29 PM
How much for hub caps on the tank?

Hahahaha I won't even glorify that one with an answer.
LTb1ow
07-07-2008, 05:27 PM
This may be a dumb question, but if I had a pair of chrome wheels could you make them silver?
HardcoreZ28
07-07-2008, 08:37 PM
This may be a dumb question, but if I had a pair of chrome wheels could you make them silver?

Yes the chrome could be blasted off and then the wheels could be powdercoating. Removing chrome will be more expensive though as it's very tough to get off. PM me if you want a price.
unstable bob gable
07-09-2008, 11:11 PM
Paul does righteous work. I just dropped off some AMX emblems for him to powdercoat, and I know they will be spiffy as hell when he's done w/ 'em! :w00t:
Jersyboyy
07-11-2008, 04:46 PM
BOB back posting on nj again? Can it be dude? Thought you were going to put up the good fight and stick it out?
unstable bob gable
07-11-2008, 05:30 PM
BOB back posting on nj again? Can it be dude? Thought you were going to put up the good fight and stick it out?

I retired from the lounge, as I stated in my final post there. I'm strictly here for business. I've known Paul for a long time and I just want to vouch for his work
TransAm619
07-13-2008, 02:10 AM
sorry to go offtopic but im curious as to what it would cost to have my CME tips powdercoated a bright silver?
HardcoreZ28
07-14-2008, 12:43 PM
sorry to go offtopic but im curious as to what it would cost to have my CME tips powdercoated a bright silver?

I'm assuming those are exhaust tips? Do you have any idea the dimensions or a pic you can send me? Shouldn't be too much.
CaysE
07-14-2008, 01:01 PM
Do you have a shadow chrome color available, or anything like it with a wide luminence range I guess you'd call it?
HardcoreZ28
07-14-2008, 02:24 PM
Do you have a shadow chrome color available, or anything like it with a wide luminence range I guess you'd call it?

Not quite sure what you mean. Like a darker chrome/silver color? Explain the wide luminescense part and I can take a look around. Or if you know a supplier who makes the powder you're looking for I can get it.
CaysE
07-14-2008, 04:12 PM
By wide luminance range I mean it's mostly a fairly dark color like gunmetal, but when light hits it, it becomes real bright like silver or chrome.

Similar to these wheels:

http://tweakers.net/ext/f/c0fb2c2c344c432a2c5b68de4a3dfbcd/full.jpg
HardcoreZ28
07-14-2008, 09:12 PM
By wide luminance range I mean it's mostly a fairly dark color like gunmetal, but when light hits it, it becomes real bright like silver or chrome.

Similar to these wheels:

http://tweakers.net/ext/f/c0fb2c2c344c432a2c5b68de4a3dfbcd/full.jpg


Ok....I think I've got something for you. My Super Ram is done in a similar color to that....although I wouldn't say it gets super shiny in direct sunlight but notably brighter than when it's not in direct light. There's pics of my engine on my company website in the Past Projects section. If you want closer pics let me know and I can take some tomorrow for you.